◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC31i-MODEL B ◆XYZ: 1120×610×610 (high column) ◆Table work surface: 1300×610 ◆Maximum workpiece load: 1,200kg ◆Spindle rotation speed: 500-30000min-1 ◆Spindle taper: HSK-E40 (compatible with two-sided restraint tools) ◆Spindle bearing inner diameter: 45mm ◆ATC30 ◆Power supply: 31kVA ◆Machine body: 3,586×4,900×H2,984mm ◆Weight: 10,500kg

ShinMaywa Kiko

◆Pressure capacity: 350kN ◆Stroke length: 110? ◆Capacity generating position: 5.5? ◆Strokes per minute: 60-100min-1 ◆Die height: 250? ◆Slide adjustment amount: 55? ◆Slide underside dimensions: (LR×FB): 350×300? ◆Bolster dimensions (LR×FB): 700×400 ◆Height: 2425? ◆Mass: 2600kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Main body structure: Steel plate welding◆Cutting capacity (plate thickness x length) 6.5T x 2500 ◆Shear angle (degrees ° minutes'): 1°10' ◆Stroke number: 60s.pm ◆Stroke number adjustment: Possible (upward end pause function) ◆Clutch brake: Electromagnetic clutch brake ◆Counter balancer: Yes (2 pieces) ◆Upper blade slide method: Roller guide method ◆Light beam: Halogen lamp (75W x 3 pieces) ◆Automatic cutting contact: 3 contacts (long / short switching) ◆Operation mode: Single action / linked / automatic / inching / pause / cut ◆Plate clamping method: Hydraulic type, number of pieces: 12 ◆Back gauge method (speed / 60Hz): Auto back gauge (3m / min.), effective range: 10-1000mm Reversal function: Automatic reversal at the backward end Yes ◆Side gauge effective length: 1000mm ◆Electric motor Main: 7.5 / 4kW / p, Sub: 0.4 / 4 ◆Machine dimensions: W3688×D2690×H1660 ◆Machine weight: 7600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Cooling capacity: 4.5KW ◆External dimensions: W360×D875×H440 ◆Compressor: Equivalent to 1.1KW_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

ShinMaywa Kiko

◆Travel amount XYZ: 1,050×560×460 ◆Table top surface to spindle end surface: 160 to 610 ◆Table dimensions: 1,300×560 ◆Floor surface to table top surface: 800 ◆Maximum load weight: 900 ◆Spindle rotation speed: 8,000 ◆Number of spindle speed change ranges: Infinitely variable ◆Spindle taper hole: 7/24 taper No. 40 ◆Spindle bearing inner diameter: Φ70 ◆Rapid forward speed XYZ: 40×40×32 ◆Cutting feed speed XYZ: 32 ◆Spindle motor (10 min/continuous): 11/7.5 ◆Feed axis motor XYZ: 4.0 ◆Tool shank type: MAS BT40 ◆Pull stud type: MAS 2 ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (adjacent): Φ90 ◆Maximum tool diameter (no adjacent tools): Φ125 ◆Maximum tool length: 300 ◆Maximum tool weight: 8 ◆Maximum tool mass moment: 7.8 ◆Tool selection method: Memory random ◆Machine dimensions: 2,510 x 3,100 x 2,746 ◆Machine mass: 7,500 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Table working surface size (length x width): 605 x 400 mm ◆Table movement amount (manual: left/right x front/back): 750 x 440 mm ◆Dimensions of standard chuck that can be attached (length x width x height): 600 x 400 x 85 mm ◆Grinding wheel outer diameter ((50/60Hz) x width x inner diameter): φ355/φ305 x 38 x φ127 mm ◆Occupied volume (width x depth x height): 2737 x 2203 x 1808 mm ◆Machine weight: 3000 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Table working surface size: W140×D600 ◆Table travel distance: 520×180 ◆Distance from top of table to bottom of grinding wheel: 320 ◆Standard chuck (tilt type) dimensions: 380×110 ◆Workpiece allowable weight (including chuck): 80 ◆T-slot width: 12mm ◆Right-left feed speed (hydraulic): 0.1-18m/min ◆Right-left handle 1 rotation feed distance: 100 ◆Saddle Front-back manual feed Handle 1 rotation: 5mm, dial 1 scale: 0.02mm, fine feed 1 scale: 0.005mm ◆Grinding wheel head Manual infeed amount Handle 1 rotation: 1mm, dial 1 scale: 0.002mm, up-down rapid feed speed (50/60Hz): 300/360 ◆ Grinding wheel (outer diameter x width x inner diameter): Φ180 x 6-32 x Φ31.75, rotation speed (50/60Hz): 3000/3600 ◆ Motor For grinding wheel spindle: 1.5/2kW/p, for hydraulic pump: 0.75/4kW/p, for up and down fast forward 0.1/4kW/p ◆ Required power (including standard chuck, dust collection and water injection device with separator) 2.5kVA ◆ Occupied volume Width x depth x height: 2200 x 1351 x 1720 ◆ Machine weight: 1100kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Payload: 250kg [Rotation axis] ・Rotation angle: -370°~+370° ・Maximum rotation speed: 3.14rad/s ・Allowable moment: 196N・m [Tilt axis] ・Rotation angle: -135°~+135° ・Maximum rotation angle: 2.09rad/s ・Allowable moment: 539N・m ◆Repeatability: ±0.1mm ◆Applicable controller: NX100/DX100 ◆Internal I/O wiring: 6 lines ◆Internal air piping: 2 lines ◆Size: W1100×D1100×H950mm ◆Approximate main body weight: 220kg (approx. 300kg including accessories) _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Measurement range XYZ: 650 x 500 x 450 ◆Measuring scale: Linear scale system ◆Minimum display 0.01 ◆Table material: Gabbro ◆Table specifiable width (X): 800 ◆Table specifiable depth (Y): 1270 ◆Table height from floor: 725 ◆Table flatness: JIS Class 1 ◆Maximum height of measured object: 620 ◆Maximum weight of measured object: 400 ◆Drive speed Maximum acceleration: 1200mm/s2 ◆Speed variable range CNC measurement mode: 0.01 to 425, joystick mode: 0 to 120 ◆Guide method for each axis: Air bearing ◆Air source Supply pressure/Operating pressure: 0.49 to 0.69/0.39 ◆Voltage: AC100±10 (earth grounding required) ◆External dimensions: W1415×D1440×H2458 ◆Weight: 1450 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Image sensor: 4 megapixel CMOS image sensor ◆Measurement range: 600 x 300 x 200 ◆Stage: Load capacity 25 kg ◆X-axis movable range: ±100 mm ◆1 probe 6 markers_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Control device: M-730UM ◆MAPPS: MAPPSIVS ◆Operation panel type: COMPACTline (12.1) ◆Maximum swing of workpiece: 348 mm (1st, 2nd) ◆Spindle distance: 670 mm ◆Maximum machining diameter: 180 mm (1st, 2nd) ◆Standard machining diameter: 120 mm (1st, 2nd) ◆Maximum machining length: 100 mm (1st, 2nd) ◆X-axis travel: 100 mm (1st, 2nd) ◆Z-axis travel: 220 mm (1st, 2nd) ◆Number of spindles: 2 ◆Maximum spindle rotation speed: up to 6000 min-1 (1st, 2nd) ◆Number of spindle speed change ranges: 1 stage (1st, 2nd) ◆Spindle end shape: JIS A2-5 (1st, 2nd) ◆Spindle through hole diameter: 61 mm (1st, 2nd) ◆Spindle bearing inner diameter: 100 mm (1st, 2nd) ◆Number of tool rests: 2 ◆Type of tool post: 10-sided turret (1st, 2nd) ◆Number of tools that can be mounted on the tool post: 10 (1st, 2nd) ◆Height of shank part of square tool bit: 20mm (1st, 2nd) ◆Diameter of shank part of boring bar: Maximum 32mm (1st, 2nd) ◆Indexing time of 10-sided tool post (1 station): 0.31 seconds (1st, 2nd) (full tool) ◆Rotating tool spindle rotation speed: 10,000min-1 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720 x 510 x 460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction x Y-axis direction): 850 x 510 ◆Allowable workpiece mass: 800 kg ◆Shape of work surface (T-slot nominal dimension x spacing x number): T18 x 110 x 5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000 min-1 ◆Spindle end: No. 40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool mass: Maximum 8/average 5/total 100 ◆For cutting oil (coolant): 240L ◆Machine height: 2635cc ◆Required area (left/right x depth): 2855 x 3015 ◆Machine weight: 5.5T [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 internal coil conveyors on the left ◆Air blow device ◆Each axis has grease terminal installed._If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Controller: XM-1500 ◆Head: XM-C1000 ◆Head base monitor section: XM-M1200 ◆Head base movable stage section: XM-S1200 ◆Camera Probe Stage marker: XM-T1200 ◆Imaging device: 4 megapixel CMOS ◆Measurement range: 600 x 300 x 200 (mm) ◆Minimum display unit: 1_ ◆Repeatability accuracy When stage is locked: ±3_ ◆Repeatability accuracy When stage is unlocked: ±4_ ◆Indication error When stage is locked: ±8_ ◆Indication error When stage is unlocked: ±(10+L/100)_ ◆Load capacity: 25Ω ◆X-axis movable range: ±100mm ◆Rotation range: ±60° ◆Number of probes: 2 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko