Controller: MSX-701Ⅲ Table size: 1,000 × 600 mm Max. load capacity: 800 kg Travel　　X: 900 Y: 600 Z: 450 mm Distance from spindle end to nose: 200～650 mm Spindle speed: 12,000 rpm Tool shan : BT40 ATC: 20 stations Required floor space: 2,750×3,304 mm Machine height: 3,010 mm Machine weight: 8,500 kg Chip conveyor Touch sensor

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.

Controller: MSX-701Ⅲ　(FANUC-31iA） Table size: 1,000 × 600 mm Max. load capacity: 800 kg Travel　　X: 900 Y: 600 Z: 450 mm Distance from spindle end to nose: 400～850 mm Spindle speed: 8,000 rpm Tool shan : BT50 （2‑surface constraint） ATC: 230 stations Required floor space : 4,605×4,250 mm Machine height : 3,169 mm Machine weight : 11,000 kg High column (200 mm) Sub-table (120 mm) Rotary table　(with tailstock) 1-axis additional interface Through-spindle coolant discharge pressure: 7.0 Mpa

AK TECHNOS CO., LTD.

Control unit : FANUC 35i-MODEL B Table : 2,000×4,100 mm Travel (X, Y, Z) : 4,235×2,245×357 mm Distance from the top of the chuck to the end of the spindle (φ200): 138～495mm Max. work weight : 4,000 kg Spindle speed : 55～795 rpm Tool storage capacity : 4 stations Spindle tip : BT60 Two-sided restraint Cutter tip diameter (face milling): φ200mm (Rough, finishing) φ315mm (Finishing) Machine area : 4,750×11,100×3,400 mm Maintenance area : 6,300×11,100mm Machine weight : 39,000 kg Electromagnetic chuck with hydraulic axim : 2,000×4,000 mm Manual pulse handle Operation panel side coil conveyor High speed spindle compatible

AK TECHNOS CO., LTD.

Control unit : FANUC 35i-MODEL B Table : 1,500×2,800 mm Travel (X, Y, Z) : 2,950×2,190×345 mm Distance from the top of the chuck to the end of the spindle (φ 200): 138～483 mm Max. work weight : 4,000 kg Spindle speed : 55～795 rpm Tool storage capacity : 4 stations Spindle tip : BT60 Two-sided restraint Cutter tip diameter (face milling) : φ 200mm (Rough, finishing) φ 315mm (Finishing) Machine area : 4,700×8,200×3,230 mm Maintenance area : 6,300×9,260 mm Machine weight : 30,500 kg Electromagnetic chuck with hydraulic axim : 1,500x2,700 mm Manual pulse handle Operation panel side coil conveyor High speed spindle compatible

AK TECHNOS CO., LTD.

Conroller: MSX-850 Swing over bed: 923 mm Swing over cross slide: 755 mm Max. turning diameter: 356 mm Std. turning diameter: 275 mm Max. turning length: 510 mm Travel　X: 260 Z: 590 mm　 Spindle speed: 5,000 rpm Min. indexing: C: 0.001° Through-spindle hole diameter: φ73 mm Spindle taper: JIS A2-6 Turret: 12 stations Milling spindle speed: 6,000 rpm Tailstock travel: 564 mm Tailstock taper: MT4 Required floor space: 2,695　×　1,923 mm Machine height: 2,120 mm Machine weight: 5,500 kg 8"Hydraulic hollow 3-jaw chuck Tool presetter

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Controller: FANUC-16iMB Table Size: 2,000 x 2,200 mm Max. table load: 10,000 kg Travel　(X, Y, Z, W): 4,000 x 2,000 x 2,000 x 700 mm 　　　　　 B: 360° (0.001°arbitrary indexing/90°indexing) 　　　　　 Distance from Table Top to Spindle Center: -50～1950 mm 　　 （Table Thickness Increased by 50mm: 0～2,000mm → Changed to -50～1,950mm）　　　 Bore Spindle Diameter: φ130 mm Spindle Speed: 5～2,500 rpm Number of tools: 90 stations Spindle taper hole: BT50 Required floor space: 8,700 x 8,395 mm 　　　　　　　 Height: 4,800 mm Machine weight: 44,000 kg Stroke Extension X: 4000 Z: 2000 Scale Feedback: X, Y, Z, B Axes Manual Pulse Handle Center-Through Coolant: 1MPa External Air Blow Rigid Tap (Includes Return Function) Oil Mist Device (Bluebe) Touch Centering/Auto Centering Function Chip Conveyor Splash Guard Type A, B (Special) Cutting fluid device Type B (special) Splash guard Type A, B Helical interpolation Total Tape Memory Length: 1,280M Tool offset amount memory C Total number of additional tool offsets: 200 Additional registered programs: 400 Custom Macro B (600 common variables) Automatic corner override Relocation Detection Device

AK TECHNOS CO., LTD.

Control : MAZATROL 640T NEXUS Swing on bed: φ610 mm Swing over cross slide: φ350 mm Max. work diameter : 350 mm Max. work length : 514 mm Maximum load capacity: chuck 300 kg center 700 kg 　　　　　 Travel X : 190 Z : 535 mm Spindle speed : 4,200rpm Through-spindle hole diameter : φ76 mm Tarret : 12 stations Travel of tail stock : 550 mm Tapered hole: MT NO.5 　　　　　 Required floor surface : 2,200 x 1,780 mm 　　　　　 Machine height : 1,840 mm Machine weight : 4,900 kg 　 　　　 10-inch hollow hydraulic chuck (Kitagawa B-210) 　 　　　 Chuck cylinder (S1875-5Y) Tool Eye 150-liter coolant system

AK TECHNOS CO., LTD.

Max. Workpiece Pass Width: 1,050 mm Table Work Surface Size: 2,050 x 850 mm Workpiece weight capacity: 3,300 kg (including 800 kg chuck) Chuck size: 1,500 x 800 x 100 mm Travel X: 2,250 Y: 910 Z: 620 mm Z-axis automatic feed: 0.0001 ～ 0.9999 mm Automatic feed increment: 0.001–0.03 mm (15 steps) Grinding wheel (Out diax Widthx In dia): φ510 x 50 x φ127 mm 　　　　 Grinding wheel rotation speed: 400 ～ 1,600 rpm Facility Footprint: 6,570 x 3,850 mm Machine Height: 3,550 mm 　　　　 Machine Weight: 15,500 kg Magnetic separator water injection system・ automatic paper filter 　　　　　　　　　　　　　　　　　　　・automatic liquid temperature controller Electromagnetic chuck (1500 x 800 mm) 　　　　 Automatic demagnetization controller 　　　 Spare grinding wheel flange Work light (LED)

AK TECHNOS CO., LTD.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Table working surface:　850 × 400 mm Table travel range: 950 × 440 mm Distance from table top to bottom of grinding wheel: 595 mm Chuck size: 800 × 400 × 85 mm Maximum work weight: 700 kg T-slot width × quantity: 17 mm × 3 slots Automatic feed increment: 0.001–0.03 mm (15 steps) Grinding wheel (Out diax Widthx In dia): φ305x 38xφ127 mm 　　　　 Grinding wheel rotation speed: 1,800 rpm 　　 Required floor space: 3,222 x 2,214 m　　 Machine height: 2,114 mm 　　　　 Machine weight: 3,900 kg Overhead dresser Grinding wheel (with flange Dust collector・Coolant System with Magnetic Separator (120L) 　　　　 Wheel balancer

AK TECHNOS CO., LTD.

Control unit: CELOS ERGOline Meldaｓ M730UM Swing over bed: 923.8 mm Swing over cross slide: 755 mm Maximum turning diameter: 366 mm Standard turning diameter: 271 mm Maximum turning length: 510 mm Travel X: 260 Y: 100 (±50) Z: 590 mm C: 0.001° Spindle speed: 5,000 rpm Through-spindle hole diameter: φ73 mm Spindle nose shape: JIS A2-6 Turret: 12 stations Turret tool speed: 10,000 rpm Tailstock travel: 564 mm Tailstock taper hole: MT4 Required floor space: 3,526 x 2,082 mm Machine height: 2,145 mm Machine weight: 5,100 kg 8-inch 3-jaw hollow chuck BB-208 (Kitagawa) Chip conveyor (front right discharge) On-board tool printer MAPPS V (interactive) Rigid tap Relocation detection function

AK TECHNOS CO., LTD.

Control : MELDAS　M730BM Table size : 1,100 x 600 mm Max. load capacity : 1,000 kg Travel　　X : 800 Y : 530 Z : 510 mm Distance from spindle end to nose : 150～660 mm 　　　　 Spindle speed : 13,000 rpm Tool shank : BBT40 (BIG Plus) MAS1 ATC : 30 stations Required floor space : 3,314×3,613 mm　 Machine height : 2,597 mm Machine weight : 6,400 kg In-machine coil conveyors (two, left and right) Scraper-type chip conveyor (left rear discharge) Tool length compensation and tool breakage detection Touch sensor (Renishaw OMP60) MAPPS IV Program memory capacity: 600 m Number of registered programs: 400 Custom macro common variables: 200 Coordinate rotation Relocation detection function

AK TECHNOS CO., LTD.

Controller: OSP-P300M Table Size: 1,300×560 mm Max. loading weight: 900 kg Travel　　X: 1,050　　Y: 560　　Z: 460 mm Distance between table and spindle nose: 150～610 mm 　　　　　 Spindle taper: BT40 Spindle speed: 50～15,000 rpm ATC: 32 stations Required floor space: 2,500 × 3,123 mm　　　　　　 Machine height: 2,750 mm Machine weight: 7,500 kg Spindle center through (air and coolant 1.5Mpa) 　　　　 　 In-machine coil conveyors (two, left and right) Tool breakage detection, automatic tool length compensation 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping 　　　　　 Unidirectional positioning 　　　　　 NURBS interpolation 　　　　　 Mist collector

AK TECHNOS CO., LTD.

Control unit: FANUC 32i-MODELB Table size: 1400 x 400 mm Max. work weight: 600 kg Table T-slot width and pitch: 18 (h7) P = 80 mm 　　　　　 Number of table T-slots: 5 Travel　X: 850　 Y: 400　 Z: 520 mm Spindle end to table top: 140 to 660 mm Spindle speed: 55～2,000 rpm Spindle taper: BT50 Machine required area: 2,954 x 1,870 mm Height: 2,499 mm 　　　　　 Machine weight: Approximately 3,700 kg NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60ℓ) 　　　　　 Processing guidance function

AK TECHNOS CO., LTD.