Controller: OSP-P300MA Table size: 2,200 x 1,050 mm   (with additional 2‑axis tilting table) Max. loading capacity: 5,000 kg Travel (X, Y, Z): 2,050 x 1,060 x 800 mm Distance from spindle nose to table top: 200～1,000 mm Spindle taper: BBT50 (BIG Plus) Spindle speed: 50–12,000 rpm Tool storage capacity: 54 tools Required floor space: 6,760 × 4,470 mm   Height: 3,520 mm Machine weight: 25,200 kg Additional 1‑axis rotary table included Chip conveyor (left‑side discharge) Spindle center‑through (air & coolant 7.0 MPa) Tool breakage detection and tool length measurement Touch probe (for workpiece measurement) Helical cutting Synchronous tapping II Programmable mirror image Arbitrary‑angle chamfering function Cylindrical side machining function SUPER‑NURBUS function Mist collector

AK TECHNOS CO., LTD.

Renewal machine Swing over bed: φ630 mm Swing over cross slide: φ400 mm Bed width: 425 mm Spindle nose type: JIS A1‑11 Spindle bore diameter: φ84 mm Spindle speed: 18–1,600 rpm (14 steps) Cross slide travel: 380 mm Top slide travel: 200 mm Center size: Morse Taper No.5 Tailstock quill travel: 200 mm (2‑step switching) Maximum distance between centers: 1,500 mm Leadscrew: Metric Required floor space: 3,250 × 1,050 mm Machine weight: 2,800 kg Accessories / Equipment 3‑jaw chuck, φ273 mm Z‑axis presetting device Fixed steady rest, φ200 mm Travelling steady rest Chip tray No cutting‑oil unit

AK TECHNOS CO., LTD.

Control unit: OKUMA OSP‑E100L Max swing: φ530 mm Swing over cross slide: φ420 mm Distance between centers: 300 mm Max work dia. × max work length: φ230× 300 mm Travel (X, Z): 180 × 335 mm    C: 360° (rotational control angle 0.001°) Max spindle speed: 50～6,000 rpm Spindle through‑hole dia.: φ53 mm Turret type: 12‑station composite quick‑change type (shared for L/M) Tailstock quill travel: 80 mm Rotary Tool Speed: 100～6,000 rpm Required floor space: 2,035 × 1,720 mm Machine height: 1,700 mm Machine weight: 3,300 kg 6‑inch 3‑jaw hydraulic chuck B‑206 (Kitag Touch setter Easy conversational programming Synchronized tapping

AK TECHNOS CO., LTD.

Control unit: MAZATROL MATRIX NEXUS Maximum swing: φ940 mm Maximum work diameter : φ920 mm Maximum work height: 800 mm Distance between spindle nose and turret face: 154～1030 mm Maximum load capacity: 3000 kg Travel （X, Z）: 470 ｘ 876 mm Maximum spindle speed: 1,250 rpm Turret type: 12‑station drum turret Required floor space: 2,315 × 1,988.5 mm Machine height: 3,400 mm Machine weight: 14,000 kg Rear‑discharge chip conveyor 18‑inch 4‑jaw independent chuck (915‑ST, Kawata Tech) Coolant tank: 460 L ATC with 12 tools (CAPTO C6) 3‑stage signal tower Relocation detection device

AK TECHNOS CO., LTD.

Control unit : LN1W (SI-LINK) Maximum workpiece dimensions :   550 × 380 × 220 mm (jet machining)   550 × 380 × 170 mm (immersion machining) Maximum workpiece mass :   400 kg (jet machining)   300 kg (immersion machining) Machining tank internal dimensions : 894 × 720 mm Travel X : 360 Y : 250 Z : 220 mm     U × V : 80 × 80 mm Taper machining control angle (at 80 mm thickness) : ±20° Wire electrode diameter : φ0.15–φ0.3 mm Wire feed speed : 420 mm/sec Wire bobbin mass : 8 kg Electrical capacity : 3-phase 50/60Hz 13 kVA Required floor space : 1,785 × 2,260 mm Height : 2,065 mm Machine weight : 2,700 kg Maximum discharge current: 40 A Service tank unit dimensions : 800 × 2,080 × 1,895 mm Machining fluid capacity : 590 liters Mass (dry) (including power supply) : 585 kg Machining fluid filtration method : Paper filter replacement type (internal pressure, dual‑cylinder type) Eco Ion : Ion‑exchange resin (18‑liter specification)

AK TECHNOS CO., LTD.

Control Unit: FANUC-0iMD Table Size: 900 × 600 mm Max. load capacity : 500 kg Travel: X: 600 mm / Y: 530 mm / Z: 510 mm Distance from Table Surface to Spindle Nose: 150–660 mm Spindle Speed: 10,000 rpm Tool Shank: BT40 Tool Storage Capacity: 30 tools Required Floor Space: 1,900 × 2,400 mm Height: 2,674 mm Machine Weight: 5,800 kg

AK TECHNOS CO., LTD.

Control Unit: MSX-701Ⅲ Table Size / Number of Pallets: 400 mm square / 3 pallets Loading capacity: 400 kg Travel: X: 560 mm Y: 560 mm Z: 630 mm B: 0.001° Spindle Taper: BT40 Spindle speed: 14,000 rpm Tool storage capacity: 60 tools Required Floor Space: 2,300 × 3,755 mm Height: 2,610 mm Machine Weight: 8,500 kg Chip Conveyor: Rear discharge

AK TECHNOS CO., LTD.

Control unit: Arumatik‑Jr (Meldas) Table size: 500 × 860 mm Maximum table load: 500 kg Travel (X / Y / Z): 760 / 510 / 510 mm Spindle taper: BBT40 (dual‑contact) Spindle speed: 12,000 rpm (gear‑driven) ATC capacity: 24 tools Required floor space: 2,415 × 2,243 mm ≪Optional Equipment≫ Chip conveyor (front‑left discharge) Air‑blow unit Automatic tool length measurement

AK TECHNOS CO., LTD.

Control unit: FANUC 32i‑MB Table size: 1,400 × 400 mm Table T-slot dimensions: 54×11.8 mm (75 mm pitch) Travel: X 1,000 mm Y 505 mm Z 480 mm Distance from spindle end to table surface (vertical axis): 10～490 mm Distance from spindle center to table surface (horizontal axis): 15～495 mm Spindle speed: 35～1,350 rpm Spindle nose: NT50 Required floor space: 3,340 × 1,920 mm Height: 2,630 mm Machine weight: approx. 5,000 kg Operation panel: Standard / Guidance (conversational only) Manual taper handle included Coolant unit (30 L) Spindle lock mechanism Splash guard LED work light

AK TECHNOS CO., LTD.

Control unit : OSP-P500S Swing over saddle (Upper/ Lower turret): φ650 mm/φ320 mm Max. machining dia.: Upper φ650 mm/ Lower φ320 mm Maximum machining length: 1,500 mm Maximum workpiece weight (including chuck) Cantilever support: 118–335 kg Between centers: 620 kg Travel Upper tool turret: 　　　 X : 695 Y : 300 mm (±150) Z : 1,600 mm 　　　 B‑axis: 30°–210° (indexing 0.001°) Travel Lower tool turret: 　　　 X : 235 Z : 1,524 mm 　　　 C‑axis: 360° (indexing 0.0001°) W: 1,524 mm 　　　 Spindle speed : 45～4,200 rpm Spindle tip : JIS A2-８ Main spindle through‑hole diameter: φ91 mm Opposed spindle speed: 38～3,800 rpm Opposed spindle nose: JIS A2‑8 Opposed spindle through‑hole diameter: φ80 mm 　　　 Turret type: Upper: H1 (shared for L/M)　　Lower: V12 　　　 Tool storage capacity: 40 tools Tool spindle speed (upper): 50～12,000 rpm Tooling interface: HSK‑A63 Required floor space : 5,425 × 3,082 mm Height : 3,030 mm Net weight : 18,000 kg ≪Options≫　　　　　 Main spindle: D230 2J COMP (Teikoku Chuck) 　　　 Opposed spindle: FD‑215 (Teikoku Chuck) Hydraulic cylinders: Main / Opposed – SIN‑L125 (SMW) SMW special steady rest (mounted on lower turret) Coolant circuit: Upper turret through‑spindle, low pressure 　　　 Tool turret air blow: 　　Upper: shared with HI coolant (through during L/M rotation/ outer circumference) 　　Lower: combined with coolant nozzle 　　　 In‑machine work measurement: RMP60 (Renishaw) 　　　 Tool setter Work support rest (mounted on lower turret) 　　　 Easy conversational advice function Cycle tapping DNC‑TI Helical cutting Inclined machining mode Chip conveyor (front right discharge)

AK TECHNOS CO., LTD.

Control unit: OSP‑P200LA Swing over bed: φ450 mm Swing over cross slide: φ300 mm Max. work dia. × max. length: φ280 × 200 mm Stroke X: 160 mm / Z: 330 mm Max. spindle speed: 75–3,000 rpm Spindle through‑hole diameter: φ66 mm Turret type: 8‑station drum turret Required floor space: 1,625 × 1,592 mm Machine height: 1,624 mm Machine weight: 2,800 kg Left‑discharge rear chip conveyor Without taistock Kitagawa chuck (N‑10A0601A)

AK TECHNOS CO., LTD.

Control unit: OSP‑P200LA Swing over bed: φ450 mm Swing over cross slide: φ300 mm Max. work dia.× max. length: φ280×200 mm Stroke X: 160 mm / Z: 330 mm Max. spindle speed: 75–3,000 rpm Spindle through‑hole diameter: φ66 mm Turret type: 8‑station drum turret Required floor space: 1,625 × 1,592 mm Machine height: 1,624 mm Machine weight: 2,800 kg Collet Chuck Without tailstock Left‑discharge rear chip conveyor

AK TECHNOS CO., LTD.

Workpiece size: 1500 × 500 × 595 mm Table travel: 1750 × 560 mm Table size: 1550 × 500 mm Distance from table top to bottom of grinding wheel: 595 mm Chuck size: 1500× 500× 100 mm Allowable work mass (included chuck mass): 2500 kg (555 kg) Automatic downfeed amount (rough grinding): 0.001–0.05 mm (15 steps for rough grinding, 10 steps for fine grinding) Grinding wheel (OD×width×ID): φ510× 50×φ127 mm Grinding wheel speed: 1,100 rpm Required floor space: 5,500 × 3,010 mm Machine height: 2,200 mm Machine weight: 8,000 kg Vertical feed handle for the grinding wheel head Upper dresser Grinding wheel (with flange) Coolant unit with magnetic separator (120 L) Hydraulic unit (with automatic oil temperature control) Tool set

AK TECHNOS CO., LTD.

Control: MAZATROL 640MT Maximum swing: φ610 mm Swing over carriage: φ450 mm Maximum work length: 1067 mm Travel X: 580 mm Y: 230 mm Z: 1097 mm 　　　　W (sub‑spindle travel): 1100 mm 　　　　B‑axis: 225° (0.001° indexing, 5° clamp, no contouring) 　　　　　C‑axis (main and sub spindle): 360° (0.001° indexing) Spindle through‑hole diameter: φ88 mm Main and sub spindle speed: 3,500 rpm Milling tool spindle speed: 10,000 rpm Tool magazine capacity: 40 tools Required floor space: 5,820 × 2,438 mm Machine height: 2,692 mm Machine weight: 10,000 kg Equipped with sub‑spindle, maximum machining length 1067 mm 　 Main and sub spindle: 10‑inch hollow chuck (Kitagawa B‑210A0815X) 　 　　 Automatic tool eye Synchronous tapping for milling spindle Turret air blow Coolant system 15K high‑pressure through‑spindle coolant and 2.4K flag coolant, 　 　simultaneous discharge possible Chip conveyor (side discharge, hinge type)

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel (infeed): 215 mm (minimum unit 0.0001 mm) Table Z‑axis travel: 510 mm (minimum unit 0.0001 mm) Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,950 mm Machine weight: 2,900 kg Non‑swiveling wheelhead　　 Coolant unit with magnetic separator 120 L

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.