Compact standard type, mainly for single key grooves on round objects. ○Dimensions that can be processed: Key width 3-25 mm, Minimum inner diameter φ8mm, Maximum workpiece height 200mm○Table dimensions 450x800mm○Capacity: Pocket 370mm from broach center to front of fork shaft, Outer diameter: Maximum workpiece outer diameter when based on tombstone: Approx. φ500mm○Travel distance and speed: Piston stroke 110mm, Broach blade up and down, Cutting speed 7.5m/min○Power: 200V, Motor 1.5kw 4P○Machine size: Floor surface: Width 1100 x Depth 550mm, Height 1170mm, Weight 350kg

TOSHIN MACHINE TOOL CO.,LTD．

Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.

TOSHIN MACHINE TOOL CO.,LTD．

○NC unit W41MV-MC○Workpiece dimensions Maximum workpiece 810×700×215mm Workpiece weight 500kg○Table U-shaped surface plate Left and right 640×Depth 450mm○Axis travel X-axis 400×Y-axis 300×Z-axis 220mm U-axis ±60×V-axis ±60mm Maximum taper angle 15° at maximum 200mm○Wire Wire electrode diameter used φ0.1～φ0.3mm Currently φ0.2 die○Machining fluid tank Capacity 550L Filtration: 2 paper filters○Power source Power supply 13.5KVA Air source 0.5～0.7Mpa Flow rate 75L/min or more○Size of entire machine Dimensions Width 2025×Depth 2760×Height 2015 Total weight 3220kg Main unit 2700kg Power supply 220kg NC 20kg Tank: 280 kg

TOSHIN MACHINE TOOL CO.,LTD．

Numerical control: Mitsubishi, input method by touch panel, XYZ + cutting depth = 4-axis NC control, minimum setting unit 0.0001mm, up to 1000 machining conditions can be registered, equipped with XYZ linear scale position detection device. Travel: X-axis 300mm, table left and right, Y-axis 200mm, saddle front and back, Z-axis 200mm, spindle up and down, Z-axis servo stroke (cutting depth) 345mm. Table: Working area 400mm x 300mm, maximum allowable workpiece 150kg, maximum workpiece height 200mm. Electrode: Electrode mounting diameter φ0.2 to φ3.0mm. Tank: Machining fluid capacity 20L. Power supply: Maximum machining current (peak) 30A. Required power source: Electricity 3.5KVA. Machine size: Dimensions: Width 700mm, Depth 1000mm, Height 1850mm, Weight 500kg.

TOSHIN MACHINE TOOL CO.,LTD．

○NC unit TOYOPUC Touch Minimum setting unit 0.0001mm Interactive type to input values according to the grinding pattern Grinding wheel dressing is also easy to operate with NC dialogue Plunge, traverse, contour grinding Taper grinding possible with NC dressing ○Capacity / capacity Table swing φ200mm Center distance 250mm Grinding outer diameter φ60mm Workpiece weight 20kg ○Grinding wheel Grinding wheel dimensions Outer diameter φ355 x width 15-38 x inner diameter φ127mm Maximum operating peripheral speed 33 m/s ○Grinding wheel head Minimum setting unit φ0.0001mm ○Table Swivel angle = 12.5° to -0.5° Minimum setting unit φ0.0001mm ○Workpiece headstock Swivel type Stepless speed change [Fixed shaft rotating shaft combined headstock] Shank hole MT,2 Rotation speed 21-1000rpm ○Tailstock Manual type Shank hole MT, 2○Motor for grinding wheel spindle 2.2kw 4P○Tank, etc. Coolant tank 200L Hydraulic tank 20L Mag separator, paper filter device Mist collector device○Machine size Floor surface width 3800 x depth 2200 Weight 4000kg

TOSHIN MACHINE TOOL CO.,LTD．

Operation type: Dry grinding, all axes manually operated by handle, with up and down fast forward movement of grinding wheel head. Chuck: Electromagnetic magnet, tiltable sine bar type. Chuck dimensions: Length 380mm x Width 110mm, Height 130mm. Grinding range: Left/Right 450mm x Front/Back 180mm. From top of table to bottom of standard grinding wheel: 310mm. Table: Working area: Length 600mm, Width 140mm, T-slot 12mm x 1. Allowable weight: 80kg including chuck. Movement: Left/Right 540mm x Front/Back 180mm. Grinding wheel: 50Hz: Outer diameter φ180mm x Width 6-32mm x Inner diameter φ31.75mm. Rotation speed: 3000/3600rpm (50/60Hz). Feed: Left/Right: Feed per turn of handle: 100mm. Up/Down: Manual grinding wheel head infeed: 1 scale per dial: 0.002mm, 1mm per turn of handle. With up/down fast forward movement. Power source: Motor. For grinding wheel spindle: 0.75kw 2P For vertical fast forward: 0.1kw 4P Power: 1.5KVA Machine dimensions Floor surface: Width 2200mm x Depth 1351mm Height 1727mm Weight: 1050kg

TOSHIN MACHINE TOOL CO.,LTD．

Operation type: Semi-automatic, table left/right automatic Chuck: Tilt type, electromagnetic magnet Dimensions: Width 300mm x Depth 120mm x Height 100mm Travel: Table stroke 500 x 250mm Grindstone dimensions: Outer diameter φ205 x Width 20 x Inner diameter φ31.75mm Rotation speed: 2890/3470rpm 50/60Hz Power supply: 200/220V 50/60Hz Machine size: Width 1900mm x Depth 1310mm x Height 1750mm Weight: 1150kg Accessories: 2-axis digital, up/down, front/back, Sony, minimum display: 0.001mm

TOSHIN MACHINE TOOL CO.,LTD．

○Machine specifications Grinding wheel infeed is manual operation. There is no automatic infeed function. Table left/right feed and grinding wheel table rapid advance are hydraulically driven. Table has digital display on both sides. ○Capacity/capacity Table swing φ300mm Center distance 1200mm Grinding outer diameter φ150mm Workpiece weight 120kg ○Grinding wheel Grinding wheel dimensions Outer diameter φ405 x width 16-75 x inner diameter φ152.4mm Rotation speed 1500rpm Maximum operating peripheral speed 2000m/min ○Grinding wheel table Swivel angle = non-swiveling Total travel 150mm [Manual feed 125mm + fast traverse 25mm] Travel for one color scale φ0.005mm ○Table Swivel angle = right turn 4° - left turn 4° Travel 1345mm Travel for one turn of the handwheel 13mm Feed speed (hydraulic) 10-2000mm/min○Work spindle stock Swivel angle = Non-swiveling type Dead center method Shank hole MT,4 Through hole diameter φ20mm Rotation speed 50Hz・10-60/50-300rpm 60Hz・12-72/60-360rpm○Tailstock Tapered hole MT No.4 Retraction amount 35mm Pressure adjustment range 15-60kg○Motor For grinding wheel spindle 3.7kw 4P○Tank capacity Coolant tank 120L Hydraulic tank 40L○Machine size Dimensions Width 5200 x Depth 1800 x Height 1700mm Weight 5000kg

TOSHIN MACHINE TOOL CO.,LTD．

○ Processing range: round or diagonal 5-100mm, thickness 1-40mm ○ Grindstone size: outer diameter φ350mm x inner diameter φ150mm ○ Spindle speed: 30-60rpm, converted by inverter ○ Reciprocation amount: upper 5mm, lower 5mm ○ Reciprocation number: 70-140rpm, converted by inverter ○ Carrier speed: 8rpm, 50Hz ○ Upper wheel head lifting speed: 0.024-1.3m/min ○ Machine weight: 3200kg ○ Machine body area: 1050mm x 1405mm x 2355mm ○ Primary power supply: AC200V, 3-phase, 50Hz ○ Control circuit voltage: AC100V, 50Hz, DC24V

TOSHIN MACHINE TOOL CO.,LTD．

○ Processing range: round or diagonal 5-100mm, thickness 1-40mm ○ Grindstone size: outer diameter φ350mm x inner diameter φ150mm ○ Spindle speed: 30-60rpm, converted by inverter ○ Reciprocation amount: upper 5mm, lower 5mm ○ Reciprocation number: 70-140rpm, converted by inverter ○ Carrier speed: 8rpm, 50Hz ○ Upper wheel head lifting speed: 0.024-1.3m/min ○ Machine weight: 3200kg ○ Machine body area: 1050mm x 1405mm x 2355mm ○ Primary power supply: AC200V, 3-phase, 50Hz ○ Control circuit voltage: AC100V (50Hz) DC24V

TOSHIN MACHINE TOOL CO.,LTD．

Capacity: Table swing φ200mm Headstock taper hole NT40 Distance from headstock center to table surface 120mm Table Working area 145mm×620mm Left/right stroke 270mm Front/back stroke 190mm Grindstone spindle head Up/down stroke 170mm Horizontal rotation 130° Front/back tilt ±20° Grindstone spindle speed [50/60Hz] 2650, 3300rpm/3100, 4000rpm Grindstone spindle motor 0.2kw Machine size: Floor area 850mm×1000mm Weight 300kg

TOSHIN MACHINE TOOL CO.,LTD．

Fully automatic C chamfering of plate materials using a double-headed head The cutter traces the workpiece and chamfers all 8 sides on the top and bottom. Processing capacity Square material □ MAX 500 x 500 mm □ MIN 150 x 150 mm Work table Rotating part φ125 mm Table height 820 mm from floor Work air floating device Cutter Throw-away tip replacement type Cutter diameter φ96 mm Number of cutter blades 8 Power source Power supply 3φ200V Air source Machine size Width 900 x Depth 1000 x Height 1400 mm Weight Approximately 800 kg

TOSHIN MACHINE TOOL CO.,LTD．

Country of origin: America Swing: φ640mm Spindle bore dimensions: MT.No.3 Spindle speed: 85-120-170-240-500-1000-1460rpm Feed rate: 0.004-0.007-0.010-0.015 inch/rev Spindle motor: 230V 1.3/1.6HP 5.6/4.6AMP 60Hz Speed: 1700/3400rpm Intermediate table dimensions: 530mm x 440mm Distance from spindle end to intermediate table: MAX 700mm Distance from spindle end to base table: MAX 1050mm Machine size: Width 630mm x Depth 700mm x Height 1750mm

TOSHIN MACHINE TOOL CO.,LTD．

○NC unit M-730BM (MAPPSⅣ)○Table Working surface size 900mm×600mm Maximum load mass 800kg○Travel amount X-axis 600mm Y-axis 530mm Z-axis 510mm○Main axis BBT40 Main axis rotation speed 12000rpm ATC30 units Motor AC15/11kw○Machine size Dimensions Width 2000mm + Chipcon 1071mm×Depth 3718mm×Height 2597mm Weight 6000kg○Others Additional 1 axis Nikken rotary table CNC202 In-machine measuring device Optical touch sensor, Renishaw Spindle through coolant 1.5Mpa Hinge type left-hand chip conveyor Tool holder included

TOSHIN MACHINE TOOL CO.,LTD．

○Specifications Saw blade horizontal lift type Fully automatic program cut ○Cutting capacity Width 300mm x Height 260mm Vice stroke 400mm ○Saw blade dimensions Width 34mm x Thickness 1.1mm x Length 3920mm ○Machine size Dimensions Width 2200mm x Depth 2100mm x Height 1520mm Weight 1750kg ○Included 2.0m free roller Instruction manual

TOSHIN MACHINE TOOL CO.,LTD．

○Data processing Calypso Windows 7○Probe TP1○Measuring range X axis 600mm Y axis 500mm Z axis 300mm○Measuring accuracy Minimum display amount 0.01μm○Measuring dimensions Maximum workpiece height 450mm Maximum workpiece weight 400kg○Table Measuring table 800mm x 1045mm Gabbro○Required power source Power supply AC100V±10%○Machine dimensions and mass Dimensions Width 1190mm x Depth 1045mm x Height 2105mm Loading height 1780mm Weight 770kg

TOSHIN MACHINE TOOL CO.,LTD．