○ Processing range: round or diagonal 5-100mm, thickness 1-40mm ○ Grindstone size: outer diameter φ350mm x inner diameter φ150mm ○ Spindle speed: 30-60rpm, converted by inverter ○ Reciprocation amount: upper 5mm, lower 5mm ○ Reciprocation number: 70-140rpm, converted by inverter ○ Carrier speed: 8rpm, 50Hz ○ Upper wheel head lifting speed: 0.024-1.3m/min ○ Machine weight: 3200kg ○ Machine body area: 1050mm x 1405mm x 2355mm ○ Primary power supply: AC200V, 3-phase, 50Hz ○ Control circuit voltage: AC100V (50Hz) DC24V

TOSHIN MACHINE TOOL CO.,LTD．

Numerical control: Mitsubishi, input method by touch panel, XYZ + cutting depth = 4-axis NC control, minimum setting unit 0.0001mm, up to 1000 machining conditions can be registered, equipped with XYZ linear scale position detection device. Travel: X-axis 300mm, table left and right, Y-axis 200mm, saddle front and back, Z-axis 200mm, spindle up and down, Z-axis servo stroke (cutting depth) 345mm. Table: Working area 400mm x 300mm, maximum allowable workpiece 150kg, maximum workpiece height 200mm. Electrode: Electrode mounting diameter φ0.2 to φ3.0mm. Tank: Machining fluid capacity 20L. Power supply: Maximum machining current (peak) 30A. Required power source: Electricity 3.5KVA. Machine size: Dimensions: Width 700mm, Depth 1000mm, Height 1850mm, Weight 500kg.

TOSHIN MACHINE TOOL CO.,LTD．

○Digital 3-axis digital Minimum display 0.005mm○Table Working area 1100mm x 270mm T-slot width 16mm x 3○Spindle Spindle hole No. 40 Spindle speed 67-3000/80-3600rpm 50/60Hz Head swivel angle Left and right ±90°○Stroke Table Left and right 600mm x front and back 270mm x up and down 400mm Spindle quill up and down 100mm Distance from spindle center to front of column 170-570mm Ram front and back 400mm○Feed speed Table left and right cutting feed speed 17-634mm/min Table left and right rapid traverse speed 2900mm/min Quill automatic feed 0.05-0.08-0.15mm/rev○Motor 1.5kw4P for spindle 0.4kw for cutting feed○Machine size Dimensions: Width 1750mm x Depth 1630mm x Height 2150mm Weight: 1500Kg

TOSHIN MACHINE TOOL CO.,LTD．

TOSHIN MACHINE TOOL CO.,LTD．

TOSHIN MACHINE TOOL CO.,LTD．

TOSHIN MACHINE TOOL CO.,LTD．

○Screen size φ600mm○Lens objective 20x○Work loading platform stage 380mm x 250mm Glass surface 266mm x 170mm ○Machine size Dimensions Width 1010mm Depth 1150mm Height 1750mm Weight Approximately 200kg

TOSHIN MACHINE TOOL CO.,LTD．

○Projector Screen effective diameter φ500 mm Rotating type○Lens Projection lens 20x, 10x 1 pair each○Stage XY measurement range 100×50 mm Top surface dimensions 300×240 mm Plate glass 180×150 mm Maximum load 10 kg Workpiece height 181 mm○Digital XY position display counter Minimum display amount 0.001 mm Rotating screen Angle display device○Lighting 24V 150W (halogen) with oblique reflection lighting device○Dimensions Dimensions: Width 620 × Depth 1073 × Height 1627 mm Weight: 190kg○Code No. 304-201-1

TOSHIN MACHINE TOOL CO.,LTD．

○Digital XY 2-axis display device○Table Working surface 1100mm x 250mm T-slot Width 14mm x 3○Spindle Spindle taper NT40 Spindle speed 130-2200rpm Gear 8-stage Spindle motor 1.5kw Spindle head rotation Left and right ±45 degrees○Axis travel X-axis 550mm Left and right - table Y-axis 250mm Front and back - saddle Z-axis 350mm Up and down - knee Spindle quill Diameter 120mm Feed 80mm Overram front and back movement 300mm Spindle end to table top 105-555mm *High column 100mm Spindle center to column front 125-425mm○Machine size Dimensions: Width 1640 x Depth 1835 x Height 2050 mm *High column 100mm Installation width 2190mm Weight: 1550 Kg○Accessories Tsudakoma VR-200 Precision Machine Vise 1pc BIG High Power Milling Chuck Set○Features/Operation Method 100mm column up specification Quill automatic cutting feed/feed out possible Table left/right automatic feed, table up/down fast forward device

TOSHIN MACHINE TOOL CO.,LTD．

Compact standard type, mainly for single key grooves on round objects. ○Dimensions that can be processed: Key width 3-25 mm, Minimum inner diameter φ8mm, Maximum workpiece height 200mm○Table dimensions 450x800mm○Capacity: Pocket 370mm from broach center to front of fork shaft, Outer diameter: Maximum workpiece outer diameter when based on tombstone: Approx. φ500mm○Travel distance and speed: Piston stroke 110mm, Broach blade up and down, Cutting speed 7.5m/min○Power: 200V, Motor 1.5kw 4P○Machine size: Floor surface: Width 1100 x Depth 550mm, Height 1170mm, Weight 350kg

TOSHIN MACHINE TOOL CO.,LTD．

Digital XY 2-axis display Table Working surface 1100mm x 250mm T-slot 14mm wide x 3 Spindle Spindle taper NT40 Spindle speed 130-2200rpm Gear 8-speed Spindle motor 1.5kw Spindle head rotation Left and right ±45 degrees Amount of movement of each axis X-axis 550mm Left and right - table Y-axis 250mm Front and back - saddle Z-axis 350mm Up and down - knee Spindle quill Diameter 120mm Feed 80mm Overram front and back movement 300mm Spindle end to table top 5-455mm Spindle center to column front 125-425mm Machine size Dimensions: Width 1640 x Depth 1835 x Height 1950 mm Installation width 2190mm Weight: 1550 Kg Accessories Jaw 125mm Machine vice 1 piece Milling chuck set, operation tool set ○ Features and operation method Quill automatic cutting feed/feed-out possible Automatic feed on the left and right of the table, with table up and down fast forward device

TOSHIN MACHINE TOOL CO.,LTD．

Fully automatic C chamfering of plate materials using a double-headed head The cutter traces the workpiece and chamfers all 8 sides on the top and bottom. Processing capacity Square material □ MAX 500 x 500 mm □ MIN 150 x 150 mm Work table Rotating part φ125 mm Table height 820 mm from floor Work air floating device Cutter Throw-away tip replacement type Cutter diameter φ96 mm Number of cutter blades 8 Power source Power supply 3φ200V Air source Machine size Width 900 x Depth 1000 x Height 1400 mm Weight Approximately 800 kg

TOSHIN MACHINE TOOL CO.,LTD．

○NC unit MAZATROL T32-2○Spindle chuck 12 inch 3 jaws Toyowa Spindle speed 5-2200rpm Motor 15/11kw 30min/continuous rating○Capacity Swing above bed φ560mm Swing above cross slide φ280mm Centerless chucker type○Tool rest 4-corner quick + 8-corner tool rest XZ stroke 550mm x 1020mm○Machine size Dimensions Width 3850mm x Depth 1945mm x Height 2115mm Weight 5100kg○Others Tool rest comes with 2 types: 8-corner, H4 (quick change)

TOSHIN MACHINE TOOL CO.,LTD．

Operation type: Dry grinding, all axes manually operated by handle, with up and down fast forward movement of grinding wheel head. Chuck: Electromagnetic magnet, tiltable sine bar type. Chuck dimensions: Length 380mm x Width 110mm, Height 130mm. Grinding range: Left/Right 450mm x Front/Back 180mm. From top of table to bottom of standard grinding wheel: 310mm. Table: Working area: Length 600mm, Width 140mm, T-slot 12mm x 1. Allowable weight: 80kg including chuck. Movement: Left/Right 540mm x Front/Back 180mm. Grinding wheel: 50Hz: Outer diameter φ180mm x Width 6-32mm x Inner diameter φ31.75mm. Rotation speed: 3000/3600rpm (50/60Hz). Feed: Left/Right: Feed per turn of handle: 100mm. Up/Down: Manual grinding wheel head infeed: 1 scale per dial: 0.002mm, 1mm per turn of handle. With up/down fast forward movement. Power source: Motor. For grinding wheel spindle: 0.75kw 2P For vertical fast forward: 0.1kw 4P Power: 1.5KVA Machine dimensions Floor surface: Width 2200mm x Depth 1351mm Height 1727mm Weight: 1050kg

TOSHIN MACHINE TOOL CO.,LTD．

○Spindle Chuck 10 inch 3-jaw Separate jaw type Speed range 25-1500rpm 12 steps Spindle tip shape A1-6○Capacity Swing above bed φ510mm Swing above carriage φ300mm Center distance 1000mm○Carriage Cross feed table travel 285mm Tool post travel 145mm Tool post shape 4-corner Bit shank 25mm○Tailstock Tailstock shaft taper MTNo.4 Tailstock shaft travel 150mm○Machine size Bed width 370mm Bed length 2170mm Required floor space Width 2500mm Depth 1050mm Machine weight 2000kg

TOSHIN MACHINE TOOL CO.,LTD．

Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.

TOSHIN MACHINE TOOL CO.,LTD．