◆Measurement range XYZ: 650 x 500 x 450 ◆Measuring scale: Linear scale system ◆Minimum display 0.01 ◆Table material: Gabbro ◆Table specifiable width (X): 800 ◆Table specifiable depth (Y): 1270 ◆Table height from floor: 725 ◆Table flatness: JIS Class 1 ◆Maximum height of measured object: 620 ◆Maximum weight of measured object: 400 ◆Drive speed Maximum acceleration: 1200mm/s2 ◆Speed variable range CNC measurement mode: 0.01 to 425, joystick mode: 0 to 120 ◆Guide method for each axis: Air bearing ◆Air source Supply pressure/Operating pressure: 0.49 to 0.69/0.39 ◆Voltage: AC100±10 (earth grounding required) ◆External dimensions: W1415×D1440×H2458 ◆Weight: 1450 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

2D color image measuring instrument ○Software/PC Mitsutoyo QIPAK ver6.001 Windows10 ○XYZ measuring range 200mm×170mm×100mm ○Loading stage Effective dimensions of the glass for the object 260mm×230mm Maximum load mass 20kg ○Illumination device Transmitted illumination Green LED telecentric Reflected illumination White LED Ring illumination 4-segment white LED ○Body dimensions/weight Width 632mm×Depth 860mm×Height 869.5mm Weight 140kg ○Mitutoyo code No. 361-842 ○Accessories Foot switch Printer

Table size 600 x 300 Stroke X350 Y250 Z350 W200 Maximum workpiece size 400 x 250 x 330 Electrode diameter 0.1 to 3.0

◆Payload: 250kg [Rotation axis] ・Rotation angle: -370°~+370° ・Maximum rotation speed: 3.14rad/s ・Allowable moment: 196N・m [Tilt axis] ・Rotation angle: -135°~+135° ・Maximum rotation angle: 2.09rad/s ・Allowable moment: 539N・m ◆Repeatability: ±0.1mm ◆Applicable controller: NX100/DX100 ◆Internal I/O wiring: 6 lines ◆Internal air piping: 2 lines ◆Size: W1100×D1100×H950mm ◆Approximate main body weight: 220kg (approx. 300kg including accessories) _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Table working surface size: W140×D600 ◆Table travel distance: 520×180 ◆Distance from top of table to bottom of grinding wheel: 320 ◆Standard chuck (tilt type) dimensions: 380×110 ◆Workpiece allowable weight (including chuck): 80 ◆T-slot width: 12mm ◆Right-left feed speed (hydraulic): 0.1-18m/min ◆Right-left handle 1 rotation feed distance: 100 ◆Saddle Front-back manual feed Handle 1 rotation: 5mm, dial 1 scale: 0.02mm, fine feed 1 scale: 0.005mm ◆Grinding wheel head Manual infeed amount Handle 1 rotation: 1mm, dial 1 scale: 0.002mm, up-down rapid feed speed (50/60Hz): 300/360 ◆ Grinding wheel (outer diameter x width x inner diameter): Φ180 x 6-32 x Φ31.75, rotation speed (50/60Hz): 3000/3600 ◆ Motor For grinding wheel spindle: 1.5/2kW/p, for hydraulic pump: 0.75/4kW/p, for up and down fast forward 0.1/4kW/p ◆ Required power (including standard chuck, dust collection and water injection device with separator) 2.5kVA ◆ Occupied volume Width x depth x height: 2200 x 1351 x 1720 ◆ Machine weight: 1100kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆Table working surface size (length x width): 605 x 400 mm ◆Table movement amount (manual: left/right x front/back): 750 x 440 mm ◆Dimensions of standard chuck that can be attached (length x width x height): 600 x 400 x 85 mm ◆Grinding wheel outer diameter ((50/60Hz) x width x inner diameter): φ355/φ305 x 38 x φ127 mm ◆Occupied volume (width x depth x height): 2737 x 2203 x 1808 mm ◆Machine weight: 3000 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Travel amount XYZ: 1,050×560×460 ◆Table top surface to spindle end surface: 160 to 610 ◆Table dimensions: 1,300×560 ◆Floor surface to table top surface: 800 ◆Maximum load weight: 900 ◆Spindle rotation speed: 8,000 ◆Number of spindle speed change ranges: Infinitely variable ◆Spindle taper hole: 7/24 taper No. 40 ◆Spindle bearing inner diameter: Φ70 ◆Rapid forward speed XYZ: 40×40×32 ◆Cutting feed speed XYZ: 32 ◆Spindle motor (10 min/continuous): 11/7.5 ◆Feed axis motor XYZ: 4.0 ◆Tool shank type: MAS BT40 ◆Pull stud type: MAS 2 ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (adjacent): Φ90 ◆Maximum tool diameter (no adjacent tools): Φ125 ◆Maximum tool length: 300 ◆Maximum tool weight: 8 ◆Maximum tool mass moment: 7.8 ◆Tool selection method: Memory random ◆Machine dimensions: 2,510 x 3,100 x 2,746 ◆Machine mass: 7,500 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

Liftable weight 4kg