394 entries, 289~304 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Others | Okuma |
For internal cutting, gripping diameter Φ32, shank diameter Φ30, for Okuma LR-10M
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | ||
|
Radial Drilling Machine | Okuma | DRA1600 | 1958 | - |
KOWA MACHINERY CO.,LTD
|
Details | |
|
Radial Drilling Machine | Okuma | DRA-J1250 | 1959 |
◆Maximum distance from spindle end to top surface of base: 1,485 ◆Spindle stroke: 400 ◆Base working surface: 1,480 x 1,180 ◆Column sleeve diameter: 450 ◆Required area: W2,360 x D1,180 x H3,230 ◆Net weight: 7,200 kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | Okuma | LS-540 | 1961 |
★.
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Radial Drilling Machine | Okuma | DRA-J2000 | 1970 |
◆Drilling: 70mmΦ ◆Bore: 250mmΦ ◆Tapping: W2 1/2 ◆Column diameter: 550 ◆Maximum distance between column center and spindle: 2400 ◆Maximum/minimum distance between spindle end and base surface: 1890-610 ◆Up/down movement distance of arm: 880 ◆Spindle speed range (rpm) Right rotation: (50c/s) 14-1800 (60c/s) 18-2240 Left rotation: Approximately 1.4 times the right rotation ◆MTNo.5 ◆Up/down movement distance: 400 ◆Base dimensions: W300×D3285×H1320 ◆Base working area: 2145×1140 ◆Motor 5.5kw ◆Required floor area: 3600×1320 ◆Net weight (kg): 11500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | Okuma | DRB-E2500 | 1971 |
φ105, MT6, mass
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Internal Grinder | Okuma | GI-20M | 1985 |
9-inch 3-jaw chuck, grinding hole diameter 10-200φ, maximum length 400, cover inward swing 300, spindle speed variable 50-660
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
|
Radial Drilling Machine | Okuma | DRA-J2000 | 1991 |
◆Drilling: 70mm diameter ◆Bore: 250mm diameter ◆Tapping: W2 1/2 ◆Column diameter: 550 ◆Maximum distance between side of column and spindle: 2000 ◆Maximum distance between center of column and spindle: 2400 ◆Spindle left/right travel distance: 1660 ◆Maximum/minimum distance between end of spindle and base surface: 1890-610 ◆Arm up/down travel distance: 880 ◆Speed range 50C/S: 14-1800 60C/S: 18-2240 ◆Spindle diameter: 90/85 ◆Tapered hole: MTNo.5 ◆Number of automatic feed conversions: 18 ◆Automatic feed range: 0.025-1.25 ◆Up/down travel distance: 400 ◆Dimensions: 300×3285×1320 ◆Working area: 2145×1140 ◆Auxiliary table dimensions: 500×750×600 ◆Main motor: 5.5 ◆ Lifting motor: 2.2 ◆ Clamping motor: 0.4 ◆ Coolant pump motor: 0.2 ◆ Required floor space: 3600 x 1320 ◆ Net weight: 11500 _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
NC Cylindrical Grinder | Okuma | GP-44N×100S（大径用） | 1991 |
◆OSP-5020G ◆Center distance: 1000mm ◆Table swing: φ430 ◆Maximum grinding diameter: φ400 ◆Frequency speed of grinding wheel: 2700m/min ◆XZ: 295×1210mm ◆Headstock center taper: MT No.3 ◆C-axis rotation speed: 25~600rpm ◆Tailstock center taper: MT No.5 ◆Required floor space: 4637.5×3321mm ◆Weight: 5,600kg
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
|
NC Lathe | Okuma | LCC-15 | 1995 |
OSP700 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8-sided turret, main shaft through diameter Φ40
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Lathe | Okuma | LCS-25 | 1995 |
OSP700L 10-inch 3-jaw chuck (Toyo/H037M10) 8-sided turret, right-hand chip conveyor, easy dialogue
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
NC Lathe | Okuma | LCS-15 | 1995 |
OSP700L, 8-sided turret, SAD-40 type collet chuck
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
|
NC Lathe | Okuma | LCS-15 | 1998 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
NC Lathe | Okuma | LB-300 | 1999 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NC Lathe | Okuma | LB300-MY | 1999 |
S/N 0557 Easy dialogue available OSP-U100L 12-sided turret Note) 8-inch scroll chuck ★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Lathe Chuck | Okuma | LB-400C×650 | 2000 |
◆Control device: OSPU100L ◆Hydraulic tailstock: Dead type MT No.5 ◆Hydraulic chuck: B-212 ◆Swing above bed: Φ620 ◆Swing above carriage: Φ480 ◆Center distance: 675 ◆Maximum machining diameter: Φ420 ◆Maximum machining length: 650 ◆Travel amount XZ: 300(210+90)×1275 ◆Spindle rotation speed: 35-3500 ◆Number of spindle speed change ranges: Automatic 2-stage (VAC motor winding switching) ◆Spindle end: JIS A2-8 ◆Spindle through hole diameter: Φ80 ◆Spindle bearing inner diameter: Φ120 ◆Tool post: V12M ◆Number of tools mounted on tool post: L12 ◆Shank height of square tool: 25 ◆Diameter of shank of boring bar: Φ40 ◆Tool post indexing time: 0.2 ◆Rapid traverse speed: X20000/Z25000 ◆Cutting feed speed: X, Z 0.001 to 1000000 ◆Tailstock shaft diameter: Φ100 ◆Tailstock shaft tapered hole type: MT No.5 (rotating center) ◆Tailstock shaft travel distance: 150 ◆Spindle motor: VAC 22/15 (30 min./continuous) ◆Feed shaft motor: X: BL4/Z: BL6 ◆Cutting agent motor: Chip side discharge: 0.25, rear discharge: 0.8 ◆Power supply: 29.5 (continuous) ◆Machine height: 2110 ◆Required floor space: 3980 x 1900 ◆Machine weight: 5400 *Special specifications◆Touch setter: M ◆Easy dialogue kit◆Program store capacity Tape length 320 m → 640 m _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |