OSP P300M BBT50 ATC 36-piece machine, table size 2200 x 1050 mm, spindle speed 6000 rpm

Kobayashi Kikai Co.,Ltd.

Controller: OSP-P300MA Table size: 2,200 x 1,050 mm   (with additional 2‑axis tilting table) Max. loading capacity: 5,000 kg Travel (X, Y, Z): 2,050 x 1,060 x 800 mm Distance from spindle nose to table top: 200～1,000 mm Spindle taper: BBT50 (BIG Plus) Spindle speed: 50–12,000 rpm Tool storage capacity: 54 tools Required floor space: 6,760 × 4,470 mm   Height: 3,520 mm Machine weight: 25,200 kg Additional 1‑axis rotary table included Chip conveyor (left‑side discharge) Spindle center‑through (air & coolant 7.0 MPa) Tool breakage detection and tool length measurement Touch probe (for workpiece measurement) Helical cutting Synchronous tapping II Programmable mirror image Arbitrary‑angle chamfering function Cylindrical side machining function SUPER‑NURBUS function Mist collector

AK TECHNOS CO., LTD.

Intex, Inc.

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

TOSHIN MACHINE TOOL CO.,LTD．

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

OSP-P300L 8-inch 3-jaw scroll chuck with 12-point composite turret, centered, tool presetter, and easy-to-use interactive advanced control.

Kobayashi Kikai Co.,Ltd.

Control unit: OKUMA OSP‑E100L Max swing: φ530 mm Swing over cross slide: φ420 mm Distance between centers: 300 mm Max work dia. × max work length: φ230× 300 mm Travel (X, Z): 180 × 335 mm    C: 360° (rotational control angle 0.001°) Max spindle speed: 50～6,000 rpm Spindle through‑hole dia.: φ53 mm Turret type: 12‑station composite quick‑change type (shared for L/M) Tailstock quill travel: 80 mm Rotary Tool Speed: 100～6,000 rpm Required floor space: 2,035 × 1,720 mm Machine height: 1,700 mm Machine weight: 3,300 kg 6‑inch 3‑jaw hydraulic chuck B‑206 (Kitag Touch setter Easy conversational programming Synchronized tapping

AK TECHNOS CO., LTD.

OSP-P300M HSK-F63 ATC 32-piece set, Table size 760 x 460 mm, Spindle speed 30,000 rpm, Stroke X660 Y460 Z360, Equipped with tool length measuring device, touch sensor, mist function, center-through function, and fire extinguisher.

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

FANUC31i BT50 ATC 30-piece set, Table size 1050 x 460 mm, Spindle speed 6000 rpm, with chip controller and touch sensor.

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

Control unit : OSP-P500S Swing over saddle (Upper/ Lower turret): φ650 mm/φ320 mm Max. machining dia.: Upper φ650 mm/ Lower φ320 mm Maximum machining length: 1,500 mm Maximum workpiece weight (including chuck) Cantilever support: 118–335 kg Between centers: 620 kg Travel Upper tool turret: 　　　 X : 695 Y : 300 mm (±150) Z : 1,600 mm 　　　 B‑axis: 30°–210° (indexing 0.001°) Travel Lower tool turret: 　　　 X : 235 Z : 1,524 mm 　　　 C‑axis: 360° (indexing 0.0001°) W: 1,524 mm 　　　 Spindle speed : 45～4,200 rpm Spindle tip : JIS A2-８ Main spindle through‑hole diameter: φ91 mm Opposed spindle speed: 38～3,800 rpm Opposed spindle nose: JIS A2‑8 Opposed spindle through‑hole diameter: φ80 mm 　　　 Turret type: Upper: H1 (shared for L/M)　　Lower: V12 　　　 Tool storage capacity: 40 tools Tool spindle speed (upper): 50～12,000 rpm Tooling interface: HSK‑A63 Required floor space : 5,425 × 3,082 mm Height : 3,030 mm Net weight : 18,000 kg ≪Options≫　　　　　 Main spindle: D230 2J COMP (Teikoku Chuck) 　　　 Opposed spindle: FD‑215 (Teikoku Chuck) Hydraulic cylinders: Main / Opposed – SIN‑L125 (SMW) SMW special steady rest (mounted on lower turret) Coolant circuit: Upper turret through‑spindle, low pressure 　　　 Tool turret air blow: 　　Upper: shared with HI coolant (through during L/M rotation/ outer circumference) 　　Lower: combined with coolant nozzle 　　　 In‑machine work measurement: RMP60 (Renishaw) 　　　 Tool setter Work support rest (mounted on lower turret) 　　　 Easy conversational advice function Cycle tapping DNC‑TI Helical cutting Inclined machining mode Chip conveyor (front right discharge)

AK TECHNOS CO., LTD.