18-inch 4-jaw single-acting chuck; spindle through-hole diameter 64mm; center distance 4000mm; spindle speed 23-1600 rpm; swing on bed 700mm; swing on carriage 450mm

Kobayashi Kikai Co.,Ltd.

OSP700L 10-inch 3-jaw chuck (Toyo/H037M10) 8-sided turret, right-hand chip conveyor, easy dialogue

Kobayashi Kikai Co.,Ltd.

OPS-E10L-B 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8-sided turret with tool presetter, right-hand chip conveyor, and easy dialogue

Kobayashi Kikai Co.,Ltd.

OSP-P200M BT50 ATC32 Table size 1300 x 560 Spindle speed 6000 rpm Stroke X1300 Y560 Z560 Pull stud bolt MAS2 With internal spiral conveyor

Kobayashi Kikai Co.,Ltd.

KOWA MACHINERY CO.,LTD

F-20i-FB T:1350×310 ST:X710Y320Z410 Spindle:NT50 25～2500rpm (2 stages)

KOWA MACHINERY CO.,LTD

OSP-E100L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor

Kobayashi Kikai Co.,Ltd.

OSP-U100M BT50 ATC24 Table size 1200 x 2100 (work surface 1000 x 1800) Spindle speed 4000 rpm Stroke X2000 Y1600 Z450 W1000 Gate width 1650 With angle head (end face)

Kobayashi Kikai Co.,Ltd.

OSP-P300L 12-inch 3-jaw hollow chuck (Kitagawa/B-212) 70mm through diameter, 12-sided turret, with center, 1520mm center distance, right-side chip conveyor

Kobayashi Kikai Co.,Ltd.

OSP-E10L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8-sided turret with center, rear-discharge chip conveyor

Kobayashi Kikai Co.,Ltd.

Controller: OSP-P300M Table Size: 1,300×560 mm Max. loading weight: 900 kg Travel　　X: 1,050　　Y: 560　　Z: 460 mm Distance between table and spindle nose: 150～610 mm 　　　　　 Spindle taper: BT40 Spindle speed: 50～15,000 rpm ATC: 32 stations Required floor space: 2,500 × 3,123 mm　　　　　　 Machine height: 2,750 mm Machine weight: 7,500 kg Spindle center through (air and coolant 1.5Mpa) 　　　　 　 In-machine coil conveyors (two, left and right) Tool breakage detection, automatic tool length compensation 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping 　　　　　 Unidirectional positioning 　　　　　 NURBS interpolation 　　　　　 Mist collector

AK TECHNOS CO., LTD.

Fanuc-18iMB, BT40, 20000rpm, ATC16, 50Hz, T:630*400, S(XYZ):560*410*410, Mold specifications, Helical interpolation, Rigid tap, AI high-precision contour control, Air piping for speed-up air spindle, Memory card 500M, Data server, RUN port, BCC? AI high-precision + high-speed processor, Precision table (PDF file)

EndoKikaiKogyo.INC

BT50 Allowable speed 500 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

BT50 Allowable speed 760 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

Angle head for Okuma MCV-A?, *Cannot be installed on MCV-A, BT-50, Maximum speed 760 rpm, Manually attached to the spindle, To install the tool, remove the pull stud and tighten the included bolt with a hex wrench, Please see the video at the following link for installation instructions, Please see our page at the following link for prices.

EndoKikaiKogyo.INC

OSP-E100M BT40 ATC 20-piece set, Table size 760 x 460 mm, Spindle speed 15000 rpm, Stroke X560 Y460 Z460, Tool length measuring device, Pullstad bolt MAS2, In-machine spiral conveyor, Mist function.

Kobayashi Kikai Co.,Ltd.