◆LIFT: 3m ◆CAPACITY: 250kg ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆weight: 28kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Power supply: MSX-850? ◆Swing above bed: 923.8 ◆Swing above cross slide: 755 ◆Maximum machining diameter: 366 ◆Standard machining diameter: 271 ◆Standard machining length: 1298 ◆Bar work capacity: 80 ◆Travel amount XYZ: 260×-50, +50×13445 ◆Spindle rotation speed: 4000 ◆Number of spindle speed change ranges: 2 stages ◆Spindle end: JIS A_-8 ◆Spindle through diameter: 91 ◆Minimum index angle of spindle: 0.001 ◆Spindle bearing inner diameter: 140 ◆Tool post type: 12-sided ◆Number of tools mounted on the tool post: 12 ◆Shank height of square tool: 25 ◆Diameter of shank of boring bar: 50 ◆Rotary tool spindle rotation speed: 6000min-1 ◆Rotary tool machining capacity Drill: Φ26, Tap: Max20 ◆Rapid feed speed XYZ: 30000 x 10000 x 30000 ◆Rapid feed speed tailstock: 7000 ◆Jog feed speed XYZ tailstock: 0-5000 ◆Tailstock travel distance: 1284 ◆Tailstock shaft diameter: 110 ◆Tailstock shaft tapered hole type: MT5 ◆Machine dimensions: W4339 (chip conveyor + 700) x D2143 x H2232 ◆Machine weight: 7500? _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Table size: 2000×450 ◆Table T-slot: 20H_×5 (85 pitch) ◆Table travel distance XYZ: 1400×600×580 ◆Distance between spindle end and table top: Vertical type 20-600 ◆Distance between spindle center and column: 600 ◆Distance between spindle center and table top: Horizontal type 20-600 ◆Distance between spindle end and column: Horizontal type 600 ◆Fast forward speed XY: 3500 ◆Fast forward speed Z: 1750 ◆Cutting feed speed XY: 20-1800 (infinitely variable speed) ◆Cutting feed speed Z: 10-900 (infinitely variable speed) ◆Spindle end taper: JIS No.50 ◆Spindle rotation speed conversion number (manual): High and low 2 stages, infinitely variable speed ◆Spindle rotation speed: 35-1350 (low 35-435, high 435-1350) ◆ Spindle (inverter motor): 11 x 4P ◆ Feed: 1.8AC ◆ Lubrication pump: 200 x 4P ◆ Coolant pump: 100 x 2P ◆ Total machine weight: 7000 ◆ Required installation area: 4350 x 2300 _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MSG-805 ◆KITAGAWA B-206 Hollow chuck ◆V12 ◆max 6000 rpm ◆Machine size: W2300×D1600×H2200mm ※No chip conveyor ※Tool presetter function available_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Cutting capacity 0° (right angle): W650×H400 ◆Cutting capacity 45°: W300×H300 ◆Saw blade dimensions: <GLB> W38×T1.3×L5040 ◆Saw blade speed: 27, 40, 50, 60, 70m/min ◆Permitted load weight: 1500kg ◆Machine weight: 2500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum table movement (manual) (left/right x front/back): 550 x 200 ◆Table working surface: 500 x 150 ◆Distance between table surface and grinding wheel axis: 400 mm ◆Grinding wheel dimensions: Diameter 180 x Width 9.5 x Hole diameter 31.75 mm ◆Grinding wheel rotation speed (50/60 Hz) 2780/2700 rpm ◆Magnetic chuck dimensions: Length 380 x Width 110 x Height 125 mm ◆Main body dimensions: W1,560 x D1,265 x H1,620 mm ◆Weight: 830 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MSC-805 ◆Weight: 2800kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MX-NEXUS (12.1" LCD) ◆CAPTO ATC20 ◆Maximum swing: Φ530 ◆Swing on carriage: Φ530 ◆Standard machining diameter: Φ500 ◆Maximum machining length: 500? ◆Spindle: 5000RPM ◆Spindle motor: AC11KW [Special accessories] ◆Tool post work pusher ◆Tool eye (automatic) ◆Chuck jaw air blow ◆Automatic work measurement OMP60+ adapter ◆Coolant temperature control ◆3-stage signal tower ◆Chip conveyor (side-out, hinged type) ◆Mill axis synchronous tap [Special specifications] ◆Robot I/F ◆Front door automatic opening and closing ◆8" solid chuck: N-08A0615 ★B-axis index 5 degrees_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆DC9-II ◆Pressure: 25t ◆Stroke length: 100mm ◆Table length: 1200mm ◆Gap depth: 200mm ◆Open height: 300mm ◆Weight: 1.4T

ShinMaywa Kiko

◆Swing above the bed: 435mm ◆Swing between 180mm from the face plate: 490mm ◆Swing above the cross feed table: 250mm ◆Distance from floor to spindle center: 1075mm ◆Distance from bed to spindle center: 215mm ◆Maximum distance between both centers: 850mm ◆Spindle nose: JIS A-6 ◆Spindle through hole: 52mm ◆Sleeve taper: MT6 ◆Center taper: MT4 ◆Spindle speed conversion number: 12 ◆Spindle rotation speed: 32-1800min ◆Lead screw: Φ31.75 T-shaped screw 4 teeth/inch or 6mm ◆Inch screw: 80-4 teeth/inch ◆Millimeter screw: 0.25-7mm ◆DP screw: 112-8 ◆Module screw: 0.5-3.5 ◆Cross feed table travel distance: 255mm ◆Double tool rest travel distance: 150mm ◆Maximum tool angle (X×Y): 25×25mm ◆Tailstock shaft travel distance: 150mm ◆Center taper: MT4 ◆Bed top width: 352mm ◆Total bed length: 1880mm ◆Spindle motor: 3.7_(5L) 4P ◆Coolant pump motor: 100W 2P ◆Weight: 1800W _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆CAPACITY: 250kg ◆LIFT: 3m ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆WEIGHT: 28kg _In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆MSC-803 ◆KITAGAWA B-206 chuck◆Machine size: W1500×D1600×H1700mm *No tail stock_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC21i-T ◆Maximum machining diameter: 420mm ◆Minimum spindle index angle: 0.001° ◆Spindle rotation speed: 3000min-1 ◆Tool shaft bearing inner diameter: φ45mm ◆V10 *KOYO index chuck (HSR-315) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Chuck: 300φ ◆Swing above bed: 460 ◆Swing above cross feed table: 250 ◆Distance between both centers: 800, 1000, 1500 ◆Bar stock machining diameter: 52 ◆Type of spindle end: A1-6 ◆Spindle through hole diameter: 53 ◆Spindle hole taper: No.6 ◆Number of speed changes: 12 ◆Speed range: 25 to 1500 ◆Bed: W2680×D370×Depth 340mm ◆Center distance: 1500 ◆Through hole: φ52 ◆MT No.6 ◆Motor capacity: 3.7kw ◆Machine dimensions: W3000×D1042×H1250mm ◆Weight: 2300kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆FANUC20T ◆Simple NC ◆KITAGAWA JN12 chuck (scroll) ◆Swing above bed: 560mm ◆Swing above cross feed table: 310mm ◆Distance between both centers: 2000mm ◆Spindle through hole: 91mm ◆MT No.5 ◆Spindle rotation speed: 15-1500rpm ◆Bed length: 3330mm ◆Machine dimensions: W3909×D1589×H1763mm ◆Weight: 3500kg *Vibration stopper (fixed and movable) *1 rotating center_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Control device: M-730UM ◆MAPPS: MAPPSIVS ◆Operation panel type: COMPACTline (12.1) ◆Maximum swing of workpiece: 348 mm (1st, 2nd) ◆Spindle distance: 670 mm ◆Maximum machining diameter: 180 mm (1st, 2nd) ◆Standard machining diameter: 120 mm (1st, 2nd) ◆Maximum machining length: 100 mm (1st, 2nd) ◆X-axis travel: 100 mm (1st, 2nd) ◆Z-axis travel: 220 mm (1st, 2nd) ◆Number of spindles: 2 ◆Maximum spindle rotation speed: up to 6000 min-1 (1st, 2nd) ◆Number of spindle speed change ranges: 1 stage (1st, 2nd) ◆Spindle end shape: JIS A2-5 (1st, 2nd) ◆Spindle through hole diameter: 61 mm (1st, 2nd) ◆Spindle bearing inner diameter: 100 mm (1st, 2nd) ◆Number of tool rests: 2 ◆Type of tool post: 10-sided turret (1st, 2nd) ◆Number of tools that can be mounted on the tool post: 10 (1st, 2nd) ◆Height of shank part of square tool bit: 20mm (1st, 2nd) ◆Diameter of shank part of boring bar: Maximum 32mm (1st, 2nd) ◆Indexing time of 10-sided tool post (1 station): 0.31 seconds (1st, 2nd) (full tool) ◆Rotating tool spindle rotation speed: 10,000min-1 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko