Controller : FANUC-0i-MF Plus Table size : 1,100×400 mm Maximum load : 300 kg Travel : X : 750 Y : 450 Z : 400 mm Distance from table top to nose : 170～570 mm Ram travel (manual) : 535 mm Spindle speed : 6,000 rpm Spindle end type : NT40 Spindle quill travel : 140 mm Automatic vertical feed : 0.035, 0.07, 0.14 mm/rev (3 stages) Machine dimensions : 1,920×2,050×2,425 mm　 Machine weight : 2,700 kg Number of controlled axes / Number of simultaneously controlled axes: 3 axes (X, Y, Z) / 3 axes Cutting oil supply device Automatic sliding surface oil supply device AI contour control II Lighting device Tool lock (tool clamp / unclamp) M30 automatic power off Processing guide function Standard accessories included Rigid tapping　　　　

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Control unit: FANUC 32i-MODELB Table size: 1400 x 400 mm Max. work weight: 600 kg Table T-slot width and pitch: 18 (h7) P = 80 mm 　　　　　 Number of table T-slots: 5 Travel　X: 850　 Y: 400　 Z: 520 mm Spindle end to table top: 140 to 660 mm Spindle speed: 55～2,000 rpm Spindle taper: BT50 Machine required area: 2,954 x 1,870 mm Height: 2,499 mm 　　　　　 Machine weight: Approximately 3,700 kg NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60ℓ) 　　　　　 Processing guidance function

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Control unit: CELOS ERGOline Meldaｓ M730UM Swing over bed: 923.8 mm Swing over cross slide: 755 mm Maximum turning diameter: 366 mm Standard turning diameter: 271 mm Maximum turning length: 510 mm Travel X: 260 Y: 100 (±50) Z: 590 mm C: 0.001° Spindle speed: 5,000 rpm Through-spindle hole diameter: φ73 mm Spindle nose shape: JIS A2-6 Turret: 12 stations Turret tool speed: 10,000 rpm Tailstock travel: 564 mm Tailstock taper hole: MT4 Required floor space: 3,526 x 2,082 mm Machine height: 2,145 mm Machine weight: 5,100 kg 8-inch 3-jaw hollow chuck BB-208 (Kitagawa) Chip conveyor (front right discharge) On-board tool printer MAPPS V (interactive) Rigid tap Relocation detection function

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Control unit : FANUC 35i-MODEL B Table : 2,000×4,100 mm Travel (X, Y, Z) : 4,235×2,245×357 mm Distance from the top of the chuck to the end of the spindle (φ200): 138～495mm Max. work weight : 4,000 kg Spindle speed : 55～795 rpm Tool storage capacity : 4 stations Spindle tip : BT60 Two-sided restraint Cutter tip diameter (face milling): φ200mm (Rough, finishing) φ315mm (Finishing) Machine area : 4,750×11,100×3,400 mm Maintenance area : 6,300×11,100mm Machine weight : 39,000 kg Electromagnetic chuck with hydraulic axim : 2,000×4,000 mm Manual pulse handle Operation panel side coil conveyor High speed spindle compatible

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.

Control : MELDAS　M730BM Table size : 1,100 x 600 mm Max. load capacity : 1,000 kg Travel　　X : 800 Y : 530 Z : 510 mm Distance from spindle end to nose : 150～660 mm 　　　　 Spindle speed : 13,000 rpm Tool shank : BBT40 (BIG Plus) MAS1 ATC : 30 stations Required floor space : 3,314×3,613 mm　 Machine height : 2,597 mm Machine weight : 6,400 kg In-machine coil conveyors (two, left and right) Scraper-type chip conveyor (left rear discharge) Tool length compensation and tool breakage detection Touch sensor (Renishaw OMP60) MAPPS IV Program memory capacity: 600 m Number of registered programs: 400 Custom macro common variables: 200 Coordinate rotation Relocation detection function

AK TECHNOS CO., LTD.