Control unit: FANUC 32i-MODELB Table size: 1400 x 400 mm Max. work weight: 600 kg Table T-slot width and pitch: 18 (h7) P = 80 mm 　　　　　 Number of table T-slots: 5 Travel　X: 850　 Y: 400　 Z: 520 mm Spindle end to table top: 140 to 660 mm Spindle speed: 55～2,000 rpm Spindle taper: BT50 Machine required area: 2,954 x 1,870 mm Height: 2,499 mm 　　　　　 Machine weight: Approximately 3,700 kg NC 2 axis (X, Y axis), Z axis manual Bullstat type tool attachment/detachment device (BT50) Chip coil conveyor Air blower for cutting chips (manual) Cutting tank (60ℓ) 　　　　　 Processing guidance function

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Controller : FANUC-0i-MF Plus Table size : 1,100×400 mm Maximum load : 300 kg Travel : X : 750 Y : 450 Z : 400 mm Distance from table top to nose : 170～570 mm Ram travel (manual) : 535 mm Spindle speed : 6,000 rpm Spindle end type : NT40 Spindle quill travel : 140 mm Automatic vertical feed : 0.035, 0.07, 0.14 mm/rev (3 stages) Machine dimensions : 1,920×2,050×2,425 mm　 Machine weight : 2,700 kg Number of controlled axes / Number of simultaneously controlled axes: 3 axes (X, Y, Z) / 3 axes Cutting oil supply device Automatic sliding surface oil supply device AI contour control II Lighting device Tool lock (tool clamp / unclamp) M30 automatic power off Processing guide function Standard accessories included Rigid tapping　　　　

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Maximum swing: φ2,400 mm Maximum machining diameter: φ2,000 mm Maximum machining length: 1,400 mm Maximum workpiece weight (including chuck weight): 7,000 kg 　　　 Cantilever support : 110 kg/ Double center support : 500 kg 　　　 Travel X: 1,600 Y: ±800 Z: 1,400 mm 　　　 B: 120° (-15° to 105°) 　　　 C: 0.001 index B-axis spindle NC indexing (0.001° index, 5° index combined) 　　　 Chuck rotation speed: L (low speed): 4 ～200 rpm H (high speed): 6 ～ 400 rpm 　　　 Tool rest type : H1 (1 for L (turning) and M (rotating tool)) Spindle rotation speed (M-axis): 4,000 rpm Tooling: BBT50 (BIG PLUS) Magazine tool storage capacity: 36 tools Tool post type: ATC single tool Required floor space: 6,193 x 7,325 mm Height: 4,745 mm Machine weight: 35,000 kg (excluding chuck) 　　　 Controlled Axes: 5 axes (X, Y, Z, B, C) (3 axes controlled simultaneously, excluding B) 　　 φ2,000 mm 4-jaw indented chuck (jaw lock) B-axis angled indexing for turning (indexing every 5°) M-axis spindle center through coolant: 1.5 Mpa X, Y, Z, and B-axis scale feedback Automatic cutting edge measurement (automatic ATS) by Renishaw 　　　 Touch probe for workpiece measurement by Renishaw Chip conveyor (hinge type) Automatic door for workpiece removal 　　　 Tape storage capacity: 1280 m Chamfering, corner radius 　　　 Helical interpolation 　　　 Data server: 1 GB Spare M-codes: 4

AK TECHNOS CO., LTD.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Controller: OSP-P300M Table Size: 1,300×560 mm Max. loading weight: 900 kg Travel　　X: 1,050　　Y: 560　　Z: 460 mm Distance between table and spindle nose: 150～610 mm 　　　　　 Spindle taper: BT40 Spindle speed: 50～15,000 rpm ATC: 32 stations Required floor space: 2,500 × 3,123 mm　　　　　　 Machine height: 2,750 mm Machine weight: 7,500 kg Spindle center through (air and coolant 1.5Mpa) 　　　　 　 In-machine coil conveyors (two, left and right) Tool breakage detection, automatic tool length compensation 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping 　　　　　 Unidirectional positioning 　　　　　 NURBS interpolation 　　　　　 Mist collector

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.

Max. Workpiece Pass Width: 1,050 mm Table Work Surface Size: 2,050 x 850 mm Workpiece weight capacity: 3,300 kg (including 800 kg chuck) Chuck size: 1,500 x 800 x 100 mm Travel X: 2,250 Y: 910 Z: 620 mm Z-axis automatic feed: 0.0001 ～ 0.9999 mm Automatic feed increment: 0.001–0.03 mm (15 steps) Grinding wheel (Out diax Widthx In dia): φ510 x 50 x φ127 mm 　　　　 Grinding wheel rotation speed: 400 ～ 1,600 rpm Facility Footprint: 6,570 x 3,850 mm Machine Height: 3,550 mm 　　　　 Machine Weight: 15,500 kg Magnetic separator water injection system・ automatic paper filter 　　　　　　　　　　　　　　　　　　　・automatic liquid temperature controller Electromagnetic chuck (1500 x 800 mm) 　　　　 Automatic demagnetization controller 　　　 Spare grinding wheel flange Work light (LED)

AK TECHNOS CO., LTD.

Table working surface:　850 × 400 mm Table travel range: 950 × 440 mm Distance from table top to bottom of grinding wheel: 595 mm Chuck size: 800 × 400 × 85 mm Maximum work weight: 700 kg T-slot width × quantity: 17 mm × 3 slots Automatic feed increment: 0.001–0.03 mm (15 steps) Grinding wheel (Out diax Widthx In dia): φ305x 38xφ127 mm 　　　　 Grinding wheel rotation speed: 1,800 rpm 　　 Required floor space: 3,222 x 2,214 m　　 Machine height: 2,114 mm 　　　　 Machine weight: 3,900 kg Overhead dresser Grinding wheel (with flange Dust collector・Coolant System with Magnetic Separator (120L) 　　　　 Wheel balancer

AK TECHNOS CO., LTD.

Control unit: FANUC 0i-TD Table swing over: 220 mm Distance between centers: 250 mm Max. work diameter: φ200 mm Max. workpiece mass (between centers): 50 kg Max. workpiece mass (chuck work): 20 kg Grinding wheel size: φ355 × 38 × φ127 mm Grinding wheel speed: 1,614～2,247 rpm Wheelhead X‑axis travel: 215 mm Table Z‑axis travel: 510 mm Headstock: High‑rigidity spindle Grinding wheel rotation speed : 10～500 rpm Headstock through‑hole diameter: φ18 mm Tailstock travel: 20 mm Center taper: No.3 MT Floor space: W 2,670 × D 2,010 × H 1,800 mm Machine weight: 2,900 kg Non‑swiveling wheelhead

AK TECHNOS CO., LTD.