Numerical control: Mitsubishi, input method by touch panel, XYZ + cutting depth = 4-axis NC control, minimum setting unit 0.0001mm, up to 1000 machining conditions can be registered, equipped with XYZ linear scale position detection device. Travel: X-axis 300mm, table left and right, Y-axis 200mm, saddle front and back, Z-axis 200mm, spindle up and down, Z-axis servo stroke (cutting depth) 345mm. Table: Working area 400mm x 300mm, maximum allowable workpiece 150kg, maximum workpiece height 200mm. Electrode: Electrode mounting diameter φ0.2 to φ3.0mm. Tank: Machining fluid capacity 20L. Power supply: Maximum machining current (peak) 30A. Required power source: Electricity 3.5KVA. Machine size: Dimensions: Width 700mm, Depth 1000mm, Height 1850mm, Weight 500kg.

TOSHIN MACHINE TOOL CO.,LTD．

○NC unit W41MV-MC○Workpiece dimensions Maximum workpiece 810×700×215mm Workpiece weight 500kg○Table U-shaped surface plate Left and right 640×Depth 450mm○Axis travel X-axis 400×Y-axis 300×Z-axis 220mm U-axis ±60×V-axis ±60mm Maximum taper angle 15° at maximum 200mm○Wire Wire electrode diameter used φ0.1～φ0.3mm Currently φ0.2 die○Machining fluid tank Capacity 550L Filtration: 2 paper filters○Power source Power supply 13.5KVA Air source 0.5～0.7Mpa Flow rate 75L/min or more○Size of entire machine Dimensions Width 2025×Depth 2760×Height 2015 Total weight 3220kg Main unit 2700kg Power supply 220kg NC 20kg Tank: 280 kg

TOSHIN MACHINE TOOL CO.,LTD．

Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.

TOSHIN MACHINE TOOL CO.,LTD．

○Spindle Chuck 10 inch 3-jaw Separate jaw type Speed range 25-1500rpm 12 steps Spindle tip shape A1-6○Capacity Swing above bed φ510mm Swing above carriage φ300mm Center distance 1000mm○Carriage Cross feed table travel 285mm Tool post travel 145mm Tool post shape 4-corner Bit shank 25mm○Tailstock Tailstock shaft taper MTNo.4 Tailstock shaft travel 150mm○Machine size Bed width 370mm Bed length 2170mm Required floor space Width 2500mm Depth 1050mm Machine weight 2000kg

TOSHIN MACHINE TOOL CO.,LTD．

[Turret axis Y2 function is not available] ○NC unit MELDAS 635L○Capacity/Workpiece Maximum machining diameter φ32mm Maximum machining length 320mm Maximum front hole diameter φ12mm Maximum tap M10 Maximum back hole diameter φ10mm Maximum tap M8○Spindle Front spindle speed 8000rpm Back spindle speed 7000rpm○Number of blades 22 Comb blades Turning 5 + Milling 4 Back hole drilling 3 Turret blade rest 10○Motor Spindle 3.7/7.5kw Back 2.2/3.7kw○Machine size Dimensions Width 2805mm + Chipcon 1040mm x Depth 1240mm x Height 1900mm Weight 2950kg○Material feeder Autobar Ikura OS325E Material length 3.0m

TOSHIN MACHINE TOOL CO.,LTD．