5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices | x-travel: 800 mm | y-travel: 800 mm | z-travel: 800 mm | control: iTNC 530 Heidenhain | turning speed range - main spindle: max. 18.000 min/-1 | Speed Mainspindle: 50 - 18.000 min/-1 | power capacity - main spindel: 28 kW | max. Torque: 121 Nm | Swivel range: -30 / +180 ° | table surface area: dia. 900 x 700 mm | max. table load: 1.400 kg | table speed: 30 min/-1 | rotatable: C: 360 ° | number of toolpositions: 40 pos. | tool taper: HSK-A 63 | max. tool diameter: 230 mm | max. tool length: 450 mm | max. tool weight: 15,0 kg | rapid traverse ( X / Y / Z ): 60 m/min | Feed force ( X / Y / Z ): 13 / 13 / 9 kN | weight of the machine ca.: 13,0 t | dimensions of the machine ca.: 5,5 x 3,5 x 3,5 m | total power requirement: 68 kVA | div. tool holder: HSK-A 63 | test probe: M&H IRP 25.10 | through spindle coolant: 40 bar | tool setting: BLUM Laser

Machine Tools Germany

5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h - from training center | x-travel: 450 mm | y-travel: 400 mm | z-travel: 480 mm | control: MillPlus IT V600 Heidenhain | turning speed range - main spindle: max. 12.000 min/-1 | power capacity - main spindel: 10 / 15 kW | max. Torque: 130 Nm | swivellable: B: -95 / +30 ° | table surface area: ߘ 450 mm | T-slots: 7x 14 x 63 mm | max. table load: 250 kg | rotatable: C: 360 ° | max. workpiecediameter: 380 mm | max. workpiece height: 670 mm | number of toolpositions: 16 pos. | tool taper: SK 40 | max. tool diameter: 80 mm | max. tool-dia with free toolbox: 130 mm | max. tool length: 250 mm | max. tool weight: 8,0 kg | feed speeds: max. 30.000 mm/min | rapid traverse: 30 m/min | Feed force ( X / Y / Z ): 7 / 13 / 10 kN | total power requirement: 27,6 kVA | weight of the machine ca.: 5,2 t | dimensions of the machine ca.: 3,1 x 3,0 x 3,0 m | test probe: Heidenhain TS 449 | Vice: Allmatic T-Rex 125

Machine Tools Germany

5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools | x-travel: 1.000 mm | y-travel: 1.000 mm | z-travel: 1.000 mm | Control: 840 D Siemens | turning speed range - main spindle: 20 - 18.000 min/-1 | power capacity - main spindel: 28 / 19 kW | max. Torque: 121 Nm | tool taper: HSK-A63 | swivellable: B: -30 / +180 ° | swivle time: 1,2 s | numbers of pallets: 2 | size of pallet: 1.000 x 800 mm | max. workpiece weight: 1.500 kg | rotatable: C: 360 ° | number of toolpositions: 180 pos. | total power requirement: 78 kVA | weight of the machine ca.: 27,0 t | dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m

Machine Tools Germany

CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead | x-travel: 730 mm | y-travel: 560 mm | z-travel: 560 mm | control: iTNC 530 Heidenhain | turning speed range - main spindle: max. 18.000 min/-1 | power capacity - main spindel: 10 / 15 kW | max. Torque: 130 / 87 Nm | tool taper: HSK-A63 | swivellable: NC: +30 / -120 ° | table surface area: 1.000 x 600 mm | T-slots: 9x 14 x 63 mm | table diameter: 600 mm | rotatable: C: 360 ° | max. table load: 500 kg | number of toolpositions: 60 pos. | total power requirement: 40 kVA | weight of the machine ca.: ca. 11,0 t | dimensions of the machine ca.: 4,5 x 4,5 x 3,5 m | elektr. hand wheel: iTWC 530 | high pressure coolant: 20 bar | test probe: TS 640 Heidenhain | tool setting: BLUM Laser | turning milling head: NC

Machine Tools Germany

5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours | x-travel: 880 mm | y-travel: 630 mm | z-travel: 630 mm | control: iTNC 530 Heidenhain | turning speed range - main spindle: max. 18.000 min/-1 | power capacity - main spindel: 28 / 19 kW | max. Torque: 121 / 82 Nm | swivellable: B: +30° / -120 ° | table surface area: ߘ 700 / 1.250 x 700 mm | max. table load: 650 kg | rotatable: C: 360 ° | max. workpiecediameter: 850 mm | max. workpiece height: 550 mm | number of toolpositions: 32 pos. | tool taper: HSK-A 63 | max. tool diameter: 80 mm | max. tool-dia with free toolbox: 160 mm | max. tool weight: 8,0 kg | change-time chip to chip: 10 sec | feed speeds: max. 30.000 mm/min | rapid traverse: 30 m/min | Accelaration: 5 m/s² | total power requirement: 48 kVA | weight of the machine ca.: 14,0 t | dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m | test probe: Heidenhain TS 641 | tool holders: 8 pos. | tool setting: Blum

Machine Tools Germany

TOSHIN MACHINE TOOL CO.,LTD．

Precision chart (PDF file), Neomatic655V, BT40, 12000rpm, T:500*500, ATC-20, 2-face contact Kuroda Precision SuperBT, Increased spindle drive motor power, Through spindle 7MPa, For more details, please click on the PDF file on the left, ＜okkvp600_5ax_2006 model specifications＞.

EndoKikaiKogyo.INC

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

○Features Ultra-high speed, high precision, 5-axis controlled vertical linear motor machine○NC unit Matsuura L-Tech 30i (FANUC)○Table Top surface shape φ100mm Maximum load 20kg○Travel distance X-axis: 330mm Y-axis: 200mm Z-axis: 250mm B-axis: -110 to +10deg C-axis: 360deg Spindle end surface to table top surface B-axis 0deg = 0 to 250mm Maximum workpiece dimensions φ150mm x H150mm○Feed rate Rapid traverse (X, Y, Z) 90,000mm/min (B, C) 100/200mm/min Cutting feed (X, Y, Z) 1 to 90,000mm/min○Spindle Spindle rotation speed 43,000rpm Holder shank BBT30 ATC storage capacity 50○Motor For spindle AC7.5/5.5kw(10HP)○Required power source Electric capacity 30KVA○Machine dimensions and weight Width 1810mm Depth 3119mm Height 2404mm Weight 5120kg○Other accessories ・Mist collector ・Bloom non-contact laser tool length measurement ・RENISHAW optical automatic measurement/automatic centering ・Semi-dry generator ・Cutting oil temperature controller ・Coolant through device

TOSHIN MACHINE TOOL CO.,LTD．

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko