◆ Swing on the swivel table: 300mm ◆ Travel of the sliding table: 260mm ◆ Maximum machining R: 50R (Travel of the grinding wheel axis) ・Up and down movement: 180mm ・Forward and backward movement: 100mm ・Left and right movement: 350mm ・Travel angle (horizontal): 270° ・Travel angle (vertical): 270° ◆ Grinding wheel rotation speed: 3800/6500rpm ◆ Usable grinding wheels: Flat type / Slotted type / Cup type ◆ Required floor space: 1500 x 1000mm ◆ Machine height: 1590mm ◆ Weight: 600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆LIFT: 3m ◆CAPACITY: 250kg ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆weight: 28kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm With up and down feed With XY digital scale

◆CAPACITY: 250kg ◆LIFT: 3m ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆WEIGHT: 28kg _In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

Three-phase 200V 50/60Hz Table dimensions 500 x 500mm Weight 250kg The photo shows the unit in an uncleaned condition.

10-inch 3-jaw scroll chuck, spindle through hole diameter 52, spindle speed 32-1800 rpm, center distance 850, swing above bed 435, swing above cross slide 250

◆ Swing on the swivel table: 300mm ◆ Travel of the sliding table: 260mm ◆ Maximum machining R: 50R (Travel of the grinding wheel axis) ・Up and down movement: 180mm ・Forward and backward movement: 100mm ・Left and right movement: 350mm ・Travel angle (horizontal): 270° ・Travel angle (vertical): 270° ◆ Grinding wheel rotation speed: 3800/6500rpm ◆ Usable grinding wheels: Flat type / Slotted type / Cup type ◆ Required floor space: 1500 x 1000mm ◆ Machine height: 1590mm ◆ Weight: 600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆Working surface: 1100X260 ◆Load capacity: 200kg ◆XYZ: 600X285X400 ◆Spindle taper: JIS NO.40 ◆70-4000min ◆Spindle head rotation angle: 45° ◆Machine dimensions: W2.2×D2.0×H2.1M ◆Weight: 1.85T *Includes SONY XY scale. In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆Spindle NT50 ◆1500rpm ◆Table: 1500×350mm ◆XY: 850×350mm ◆Floor space: 680×1292×H2195mm ◆Total weight: 3200kg

NT40 Table size 1100×250 Spindle speed 75-4000rpm Stroke X550 Y250 Z350 With left/right and up/down feed XY axis digital scale

◆Belt width: 200 / Length: 1000 _If there is a difference between the specifications and the actual product, the actual product will take precedence.

Punching 6t x 25φ Angle cut 6t x 800 x 80 (90 degrees) 6t x 50 x 50 (45 degrees) Bar net cutting: round 25φ, square 22φ Notching: (square) 6 x 50 x 55 (triangle) 6 x 70 x 35 Shearing 6t x 200 *50Hz specification (can be changed to 60Hz/additional cost)

◆Maximum table movement (manual) (left/right x front/back): 550 x 200 ◆Table working surface: 500 x 150 ◆Distance between table surface and grinding wheel axis: 400 mm ◆Grinding wheel dimensions: Diameter 180 x Width 9.5 x Hole diameter 31.75 mm ◆Grinding wheel rotation speed (50/60 Hz) 2780/2700 rpm ◆Magnetic chuck dimensions: Length 380 x Width 110 x Height 125 mm ◆Main body dimensions: W1,560 x D1,265 x H1,620 mm ◆Weight: 830 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

Coil weight 1000kg, coil outer diameter 1200, coil inner diameter 508, plate thickness 0.3-1.6, plate width 150, 0.75kw, #2020

Stroke: 25-45spm Stroke Length: 250mm Die Height: 500mm Slide: 1850x650mm Bolster: 2420x840x170mm (Pin) #10520-1122 1986 Model