M730BM, energization time 610 hours, maximum machining diameter 400 mm, center distance 685 mm, 10-inch hollow chuck, milling

Controller : OSP-P300MA Table size: 1,350 x 560 mm Maximum load capacity: 1,000 kg Travel : X : 1,050, Y : 560, Z : 520 mm Distance between table and spindle nose : 170～690 mm 　　　　　Spindle taper : BBT50 (BIG plus) Spindle speed : 30～6,000 rpm ATC : 20 stations Required Floor space : 2,650 x 3,285 mm　　　　　　　 Machine height : 2,760 mm Machine weight : 9,100 kg Hinged lift-up chip conveyor (rear, left discharge) 　　　　　Spindle center through (coolant 7.0 MPa) 　　　　 Pull stud bolt type: MAS2 Chip air blower In-machine coil conveyors (two, left and right) 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping Unidirectional positioning 　　　　　 DNC-T1 Large capacity storage: 320 mm

Control unit: CELOS ERGOline Meldaｓ M730UM Swing over bed: 923.8 mm Swing over cross slide: 755 mm Maximum turning diameter: 366 mm Standard turning diameter: 271 mm Maximum turning length: 510 mm Travel X: 260 Y: 100 (±50) Z: 590 mm C: 0.001° Spindle speed: 5,000 rpm Through-spindle hole diameter: φ73 mm Spindle nose shape: JIS A2-6 Turret: 12 stations Turret tool speed: 10,000 rpm Tailstock travel: 564 mm Tailstock taper hole: MT4 Required floor space: 3,526 x 2,082 mm Machine height: 2,145 mm Machine weight: 5,100 kg 8-inch 3-jaw hollow chuck BB-208 (Kitagawa) Chip conveyor (front right discharge) On-board tool printer MAPPS V (interactive) Rigid tap Relocation detection function

◆MAZATROL smart ◆KITAGAWA B210 (10 inch) chuck ◆Center distance: 500 ◆Maximum swing: φ660 ◆Standard machining diameter: φ255 ◆Maximum machining diameter: φ380 ◆35-4000 min-1 ◆Spindle through hole: φ91 ◆Motor output: 18.5/15kw ◆MT No.5 ◆V12 ◆Power capacity: 28.7/33.8kVA ◆Machine dimensions: W1,680×D2,630×H1,700mm ◆Weight: 4,800kg *Without chip conveyor_If there is a difference between the specifications and the actual product, the actual product will take precedence.

OSP-P300M BT50 ATC20 pieces Table size 1050 x 460 Spindle speed 6000 rpm Stroke X820 Y460 Z450 With center through (1.5Mpa) With internal spiral conveyor

◆Controller: XM-1500 ◆Head: XM-C1000 ◆Head base monitor section: XM-M1200 ◆Head base movable stage section: XM-S1200 ◆Camera Probe Stage marker: XM-T1200 ◆Imaging device: 4 megapixel CMOS ◆Measurement range: 600 x 300 x 200 (mm) ◆Minimum display unit: 1_ ◆Repeatability accuracy When stage is locked: ±3_ ◆Repeatability accuracy When stage is unlocked: ±4_ ◆Indication error When stage is locked: ±8_ ◆Indication error When stage is unlocked: ±(10+L/100)_ ◆Load capacity: 25Ω ◆X-axis movable range: ±100mm ◆Rotation range: ±60° ◆Number of probes: 2 _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

Professional5 HSK-A63 ATC 40 pieces, 400mm square, spindle speed 12000 rpm, stroke X560 Y640 Z640, optional indexing, 2 pallets, rear-discharge chip conveyor

◆Control device: OKK FANUC Ai ◆Travel distance XYZ: 720 x 510 x 460 ◆Distance from table top to spindle end: 100-560 ◆Distance from column front to spindle center: 532 ◆Size of work surface (X-axis direction x Y-axis direction): 850 x 510 ◆Allowable workpiece mass: 800 kg ◆Shape of work surface (T-slot nominal dimension x spacing x number): T18 x 110 x 5 ◆Height from floor to table work surface: 850 ◆Rotation speed: 100-12000 min-1 ◆Spindle end: No. 40 ◆Bearing inner diameter: Φ65 ◆Pull stud (nominal number): MAS P40T-1 (45°) ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (with adjacent tools): Φ78 ◆Maximum tool diameter (without adjacent tools): Φ110 ◆Maximum tool length (from gauge line): 300 ◆Maximum tool mass: Maximum 8/average 5/total 100 ◆For cutting oil (coolant): 240L ◆Machine height: 2635cc ◆Required area (left/right x depth): 2855 x 3015 ◆Machine weight: 5.5T [Special accessories] ◆Signal light: 3-light type Alarm: Red light with buzzer ◆Coil conveyor: 2 internal coil conveyors on the left ◆Air blow device ◆Each axis has grease terminal installed._If there are any differences between the specifications and the actual product, the actual product will take precedence.

MELDAS rotary guide bush, 5 external diameter tools can be attached, 6 cross rotary tools can be attached (3 rotary tools), 4 main and sub common end face drills, parts catcher included, work unloading conveyor, chip conveyor, coolant filtration device, automatic fire extinguishing device included, auto bar 4m specification (ALPS/ASR X-32PN3)

Software/PC Mitsutoyo QV-PAK Ver12.103 Windows7 Measurement range (XYZ) 250mm x 200mm x 150mm Loading platform Glass size 311mm x 269mm Maximum load mass 10kg Measurement accuracy Minimum display 0.0001mm (0.1μm) Length measurement unit Linear encoder Objective lens 1.5x Manually replaceable Illumination Vertical epi-illumination White LED Transmitted illumination White LED Device size Main unit W500 x L700 x H850 mm Weight 120kg Mitutoyo Code No, 363-109

◆Control device: M-730UM ◆MAPPS: MAPPSIVS ◆Operation panel type: COMPACTline (12.1) ◆Maximum swing of workpiece: 348 mm (1st, 2nd) ◆Spindle distance: 670 mm ◆Maximum machining diameter: 180 mm (1st, 2nd) ◆Standard machining diameter: 120 mm (1st, 2nd) ◆Maximum machining length: 100 mm (1st, 2nd) ◆X-axis travel: 100 mm (1st, 2nd) ◆Z-axis travel: 220 mm (1st, 2nd) ◆Number of spindles: 2 ◆Maximum spindle rotation speed: up to 6000 min-1 (1st, 2nd) ◆Number of spindle speed change ranges: 1 stage (1st, 2nd) ◆Spindle end shape: JIS A2-5 (1st, 2nd) ◆Spindle through hole diameter: 61 mm (1st, 2nd) ◆Spindle bearing inner diameter: 100 mm (1st, 2nd) ◆Number of tool rests: 2 ◆Type of tool post: 10-sided turret (1st, 2nd) ◆Number of tools that can be mounted on the tool post: 10 (1st, 2nd) ◆Height of shank part of square tool bit: 20mm (1st, 2nd) ◆Diameter of shank part of boring bar: Maximum 32mm (1st, 2nd) ◆Indexing time of 10-sided tool post (1 station): 0.31 seconds (1st, 2nd) (full tool) ◆Rotating tool spindle rotation speed: 10,000min-1 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

Professional5 HSK-A63 ATC 40 pieces, 400mm square, spindle speed 12,000 rpm, stroke X560 Y640 Z640, optional indexing, 2 pallets, rear-discharge chip conveyor

Three-phase 200V 2.2kw Maximum dimensions of object to be cleaned Φ580×H300mm Maximum weight of object to be cleaned 35kg Discharge amount 1300L Tank capacity 170L Cleaning liquid temperature room temperature to 65℃