With mass, new main shaft motor, various bearings and oil changed, assembly and adjustment completed

Kinoshita Machinery Co., Ltd.

Kei-Machine Co.,Ltd.

BT50 Allowable speed 500 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

Angle head for Okuma MCV-A?, *Cannot be installed on MCV-A, BT-50, Maximum speed 760 rpm, Manually attached to the spindle, To install the tool, remove the pull stud and tighten the included bolt with a hex wrench, Please see the video at the following link for installation instructions, Please see our page at the following link for prices.

EndoKikaiKogyo.INC

BT50 Allowable speed 760 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

FANUC: 31i-B Spindle speed: 12000rpm ATC: 16 BBT40★

TokyoEngineering

FANUC31i-B BBT50 ATC20 Table size 1600 x 610 Spindle speed 4000 rpm Stroke X1300 Y610 Z560 Tool length measurement Touch sensor Mist

Kobayashi Kikai Co.,Ltd.

○NC unit OSP-P300MA○Table Working surface size 1300mm x 560mm Maximum load mass 900kg○Travel amount X-axis 1050mm Y-axis 560mm Z-axis 460mm○Spindle BT40 Spindle speed 12000rpm ATC20 Motor AC11/7.5kw○Machine size Dimensions Width 2564mm x Depth 3194mm x Height 2746mm Weight 7700kg

TOSHIN MACHINE TOOL CO.,LTD．

AK TECHNOS CO., LTD.

KOWA MACHINERY CO.,LTD

FANUC31i MODEL B 12-sided turret (compound) with C-axis, rear-loading chip conveyor, high-pressure coolant unit, mist collector, and front door safety device

Kobayashi Kikai Co.,Ltd.

◆Travel amount XYZ: 1,050×560×460 ◆Table top surface to spindle end surface: 160 to 610 ◆Table dimensions: 1,300×560 ◆Floor surface to table top surface: 800 ◆Maximum load weight: 900 ◆Spindle rotation speed: 8,000 ◆Number of spindle speed change ranges: Infinitely variable ◆Spindle taper hole: 7/24 taper No. 40 ◆Spindle bearing inner diameter: Φ70 ◆Rapid forward speed XYZ: 40×40×32 ◆Cutting feed speed XYZ: 32 ◆Spindle motor (10 min/continuous): 11/7.5 ◆Feed axis motor XYZ: 4.0 ◆Tool shank type: MAS BT40 ◆Pull stud type: MAS 2 ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (adjacent): Φ90 ◆Maximum tool diameter (no adjacent tools): Φ125 ◆Maximum tool length: 300 ◆Maximum tool weight: 8 ◆Maximum tool mass moment: 7.8 ◆Tool selection method: Memory random ◆Machine dimensions: 2,510 x 3,100 x 2,746 ◆Machine mass: 7,500 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

OSP-P300M BT50 ATC20 pieces Table size 1050 x 460 Spindle speed 6000 rpm Stroke X820 Y460 Z450 With center through (1.5Mpa) With internal spiral conveyor

Kobayashi Kikai Co.,Ltd.

OSP-P300L 8-inch 3-jaw medium chuck (Kitagawa/B-208) 12-corner turret with chip conveyor, mist collector, cutting tank, and loader

Kobayashi Kikai Co.,Ltd.

OSP-P300L 12-sided turret with center, center distance 1520, right-hand chip conveyor

Kobayashi Kikai Co.,Ltd.

OSP-U20G 9-inch 3-jaw chuck Grinding hole diameter 5-200φ Maximum length 200 Table swing 500

Kobayashi Kikai Co.,Ltd.