AK TECHNOS CO., LTD.

Controller : OSP-P300M Table size: 1,000 x 460 mm Maximum load capacity: 700 kg Travel : X: 762 mm, Y: 460 mm, Z: 460 mm Distance between table and spindle nose : 150～610 mm 　　　　　 Spindle taper: BT40 (MAS-I) Spindle speed : 50～15,000 rpm ATC : 20 stations Required Floor space : 2,210 x 2,810 mm Machine height : 2,746 mm Machine weight : 6,300 kg Two internal coil conveyors (left and right, rear-mounted) 　　　　　 Cutting oil system (no chip conveyor) Cutting fluid cooling system (separate) 　　　　　 One-way positioning OSP suite Helical cutting Arbitrary angle chamfering

AK TECHNOS CO., LTD.

Controller: OSP-P300M Table Size: 1,300×560 mm Max. loading weight: 900 kg Travel　　X: 1,050　　Y: 560　　Z: 460 mm Distance between table and spindle nose: 150～610 mm 　　　　　 Spindle taper: BT40 Spindle speed: 50～15,000 rpm ATC: 32 stations Required floor space: 2,500 × 3,123 mm　　　　　　 Machine height: 2,750 mm Machine weight: 7,500 kg Spindle center through (air and coolant 1.5Mpa) 　　　　 　 In-machine coil conveyors (two, left and right) Tool breakage detection, automatic tool length compensation 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping 　　　　　 Unidirectional positioning 　　　　　 NURBS interpolation 　　　　　 Mist collector

AK TECHNOS CO., LTD.

Maximum swing: φ2,400 mm Maximum machining diameter: φ2,000 mm Maximum machining length: 1,400 mm Maximum workpiece weight (including chuck weight): 7,000 kg 　　　 Cantilever support : 110 kg/ Double center support : 500 kg 　　　 Travel X: 1,600 Y: ±800 Z: 1,400 mm 　　　 B: 120° (-15° to 105°) 　　　 C: 0.001 index B-axis spindle NC indexing (0.001° index, 5° index combined) 　　　 Chuck rotation speed: L (low speed): 4 ～200 rpm H (high speed): 6 ～ 400 rpm 　　　 Tool rest type : H1 (1 for L (turning) and M (rotating tool)) Spindle rotation speed (M-axis): 4,000 rpm Tooling: BBT50 (BIG PLUS) Magazine tool storage capacity: 36 tools Tool post type: ATC single tool Required floor space: 6,193 x 7,325 mm Height: 4,745 mm Machine weight: 35,000 kg (excluding chuck) 　　　 Controlled Axes: 5 axes (X, Y, Z, B, C) (3 axes controlled simultaneously, excluding B) 　　 φ2,000 mm 4-jaw indented chuck (jaw lock) B-axis angled indexing for turning (indexing every 5°) M-axis spindle center through coolant: 1.5 Mpa X, Y, Z, and B-axis scale feedback Automatic cutting edge measurement (automatic ATS) by Renishaw 　　　 Touch probe for workpiece measurement by Renishaw Chip conveyor (hinge type) Automatic door for workpiece removal 　　　 Tape storage capacity: 1280 m Chamfering, corner radius 　　　 Helical interpolation 　　　 Data server: 1 GB Spare M-codes: 4

AK TECHNOS CO., LTD.

Angle head for Okuma MCV-A?, *Cannot be installed on MCV-A, BT-50, Maximum speed 760 rpm, Manually attached to the spindle, To install the tool, remove the pull stud and tighten the included bolt with a hex wrench, Please see the video at the following link for installation instructions, Please see our page at the following link for prices.

EndoKikaiKogyo.INC

BT50 Allowable speed 760 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

BT50 Allowable speed 500 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

Fanuc-18iMB, BT40, 20000rpm, ATC16, 50Hz, T:630*400, S(XYZ):560*410*410, Mold specifications, Helical interpolation, Rigid tap, AI high-precision contour control, Air piping for speed-up air spindle, Memory card 500M, Data server, RUN port, BCC? AI high-precision + high-speed processor, Precision table (PDF file)

EndoKikaiKogyo.INC

Intex, Inc.

Intex, Inc.

Intex, Inc.

φ105, MT6, mass

Kei-Machine Co.,Ltd.

Kei-Machine Co.,Ltd.

OSP-E100L, 8-inch solid chuck (Kitagawa N-08), #108927,

Kinoshita Machinery Co., Ltd.

With mass, new main shaft motor, various bearings and oil changed, assembly and adjustment completed

Kinoshita Machinery Co., Ltd.

OSP-P200L, bed swing φ1100, center distance: 2000, large diameter spindle ASA A2-15, spindle through hole diameter φ200, 10 to 1500 Rpm, chuck: Kitagawa IA15-915, tool rest: V8⇔H6 interchangeable specifications

Kinoshita Machinery Co., Ltd.