1037 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Radial Drilling Machine | Okuma | DRA-J1250 | 1959 |
◆Maximum distance from spindle end to top surface of base: 1,485 ◆Spindle stroke: 400 ◆Base working surface: 1,480 x 1,180 ◆Column sleeve diameter: 450 ◆Required area: W2,360 x D1,180 x H3,230 ◆Net weight: 7,200 kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Horizontal Milling Machine | HITACHI SEKI | 2ML | 1961 |
#3 milling machine ◆ XYZ: 710 x 270 x 450 ◆ Table working surface: 1350 x 270 ◆ Spindle end: No. 50 ◆ Spindle speed: 25 to 1500 rpm ◆ Main motor: 4P 5.5 kw ◆ Required floor space: W2470 x D2170 x H1660 mm ◆ Weight: 3000 kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | 池貝鉄工 | EC-18 | 1965 |
◆KITAGAWA φ160 chuck (JN06RA5) ◆Through hole: φ45 ◆Swing above bed: 400 ◆Swing above carriage: 260 ◆Maximum distance between centers: 750 ◆Total bed length: 1700 ◆Bed width: 310 ◆Spindle speed: 63-1600rpm ◆Motor: 4P 3.7kw ◆Floor area: 850×2160 ◆Weight: 1400kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Milling Machine | HITACHI SEKI | MS-V | 1965 |
◆XYZ: 600×250×360 ◆Work surface size: 1100×270 ◆Rotation speed: 60-1800rpm ◆NT50 ◆Cutting feed speed: (left/right, front/back) 16-1000 (up/down) 4-250 ◆Fast forward speed: (left/right, front/back, up/down) 2.8, 2.8, 0.7 ◆Main motor: 3.7kw ◆Floor surface dimensions (length x width): 1505×2125mm ◆Weight: 1,700kg
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | 滝澤 | TAL | 1967 |
◆KITAGAWA SK-7 Chuck_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Lathe | 江黒 | LB8-2 | 1968 | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Others | 中防 | NS-120 | 1968 |
◆Maximum stroke: 125mm ◆Rotation speed: (50Hz) 23, 37, 60, 94rpm (60Hz) 28, 44, 72, 113rpm ◆Maximum column table spacing: 325mm ◆Table diameter: 280mm ◆XYZ: 145×175×325mm ◆Motor: 1.5kw ◆Weight: 660kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Cutting/Turning tools | NACHI | 47ｺ | 1969 | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Others | ヤマゲテクノ | MY-200 | 1969 |
[__There is a video. Please check it from the video button at the bottom.] ◆ Ram maximum stroke: 205mm ◆ Ram maximum inclination angle: 10° ◆ Ram vertical adjustment distance: 280mm ◆ Table diameter: 427mm ◆ Table (front-back x left-right): 435 x 600mm ◆ Table T-slot width x number: 17mm x 2 ◆ Distance from front of bite table to support pillar: 410mm ◆ Main motor: 1.5kw 6P ◆ Machine dimensions: W1400 x D1800 x H1900mm ◆ Weight: 1,350kg *No bite escape device_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Tool Grinder | 松本 | MG-200 | 1969 |
◆Dust collector included_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lappers | ワシノ | GLP-60 | 1970 |
◆Diameter: 610mm ◆Effective diameter: 600mm ◆Rotation speed (50/60Hz): 20-70rpm ◆Capacity: Workpiece size 248mm ◆Spindle motor: 0.75kW ◆Dimensions: W1480×D980×H1200mm ◆Weight: 1,000kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | Okuma | DRA-J2000 | 1970 |
◆Drilling: 70mmΦ ◆Bore: 250mmΦ ◆Tapping: W2 1/2 ◆Column diameter: 550 ◆Maximum distance between column center and spindle: 2400 ◆Maximum/minimum distance between spindle end and base surface: 1890-610 ◆Up/down movement distance of arm: 880 ◆Spindle speed range (rpm) Right rotation: (50c/s) 14-1800 (60c/s) 18-2240 Left rotation: Approximately 1.4 times the right rotation ◆MTNo.5 ◆Up/down movement distance: 400 ◆Base dimensions: W300×D3285×H1320 ◆Base working area: 2145×1140 ◆Motor 5.5kw ◆Required floor area: 3600×1320 ◆Net weight (kg): 11500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | 若山精密工業 | NR-13A | 1970 |
◆Maximum spindle turning radius: 1,482 mm ◆Spindle left/right travel distance: 1,065 mm ◆Column sleeve diameter: 305 mm ◆Distance between spindle end and base surface (max. to min.): max 1380 to min 360 mm ◆Spindle up/down travel distance: 320 mm ◆Arm up/down travel distance: 700 mm ◆MT No. 4 ◆36~1700 rpm ◆Base working surface: 1,390 x 860 mm ◆Machine dimensions: W 2,122 x D 990 x H 2,555 mm ◆Weight: 3,100 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 東京精巧舎 | SLT-7 | 1970 |
◆Capacity: 1~6.5m/m _If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Desktop Drilling Machine | 特殊工機製作所 | 7BTT | 1970 | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Tool Grinder | 松本 | MG-200 | 1970 | Mie Prefecture |
ShinMaywa Kiko
|
Details |