◆OSP-200M ◆XYZ:1050×560×460 ◆Table:560×1300 ◆MBT40 ◆ATC32 ◆50〜15000min-1 *Oil controller *Chip conveyor *Chip bucket *Through spindle coolant (medium pressure type 1.5MPa) *Touch sensor *Automatic measurement_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Travel amount XYZ: 1,050×560×460 ◆Table top surface to spindle end surface: 160 to 610 ◆Table dimensions: 1,300×560 ◆Floor surface to table top surface: 800 ◆Maximum load weight: 900 ◆Spindle rotation speed: 8,000 ◆Number of spindle speed change ranges: Infinitely variable ◆Spindle taper hole: 7/24 taper No. 40 ◆Spindle bearing inner diameter: Φ70 ◆Rapid forward speed XYZ: 40×40×32 ◆Cutting feed speed XYZ: 32 ◆Spindle motor (10 min/continuous): 11/7.5 ◆Feed axis motor XYZ: 4.0 ◆Tool shank type: MAS BT40 ◆Pull stud type: MAS 2 ◆Number of tools that can be stored: 20 ◆Maximum tool diameter (adjacent): Φ90 ◆Maximum tool diameter (no adjacent tools): Φ125 ◆Maximum tool length: 300 ◆Maximum tool weight: 8 ◆Maximum tool mass moment: 7.8 ◆Tool selection method: Memory random ◆Machine dimensions: 2,510 x 3,100 x 2,746 ◆Machine mass: 7,500 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆professional-5 (Super Gl, 4 control) ◆Table: 630 square, 0.0001 indexing ◆XYZ: 900 x 800 x 1020 (Moire scale) ◆Retractable automatic tool length measuring device (contact type) ◆Marposs touch sensor ◆Rotation: 50 to 20000 rpm ◆Spindle: HSK-A100 ◆ATC: 186 ◆Through spindle (3.0 MPa) ※2 In case of differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-P200M ◆XYZ: 1000×900×1000 ◆Distance from table top to spindle center line: 50-950 ◆Distance from table center line to spindle end face: 70-1070 ◆Swivel table: 630×630 ◆Maximum table load: 1200kg ◆Table index angle: 0.001° (NC circular table) ◆Spindle rotation speed: 15,000min-1 ◆Spindle end face constraint: BIG plus ◆Tool shank: BT40 ◆ATC: 60 ◆2APC (2 pallets) ◆Required floor space: 3,380×6,559mm ◆Machine height: 3,225mm ◆Machine weight: 26,000kg

ShinMaywa Kiko

◆Control device: DCS-? (Based on F-31iMB5) ◆Effective distance between columns: 3000 ◆X-axis travel: 6250 ◆Y-axis travel: 3700+AACst.850 ◆Z-axis travel: 800 ◆W-axis travel: 1200 ◆Size of working surface: 5000×2500 ◆Allowable workpiece mass: 20000 ◆Rapid traverse speed X,Y-axis: 20m/min ◆Rapid traverse speed Z-axis: 12m/min ◆Rapid traverse speed W-axis (positioning only): 2.5/3.0(50/60?)m/min ◆Cutting feed speed, composite feed speed (X,Y,Z-axis) 1-15000mm/min ◆Individual feed speed X,Y-axis: 1-15000mm/min ◆Individual feed speed Z-axis: 1-12000mm/min ◆Motor for spindle: VAC37/30kw ◆Spindle ISO No.50 (2-sided constraint) ◆ATC 60 pieces ◆Chip conveyor 3 pieces type ◆Air blow ◆Automatic tool length measurement and automatic correction function (touch type) ◆Z-axis thermal variation correction function (extension and high-speed extension) ◆Axis core oil supply block (oil hole holder type) ◆Supports 2-sided constraint at the spindle end ◆Constant load control ◆Floor-mounted operation panel ◆Splash cover ◆ATTIncluded items1.Extension attachment L=600 mm, No.50, 6000 min-1 (37/30 kW) 2.High-speed extension attachment L=600 mm, No.50, 4000~15000 min-1 (15/11 kW) 3.90 degree angular attachment L=500 mm, No.50, 4000 min-1 (37/30 kW) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆NC unit: Hayan Fanuc 0i-MD ◆XYZW: 3100 x 2300 x 1000 x 900 ◆Z axis (table top to spindle end): 200 to 1200 mm ◆W axis (table top to brush tip): 0 to 900 mm ◆Table: 3100 x 2000 mm ◆Table top: With marking lines (500 mm pitch, 3 horizontal lines/7 front-back lines) ◆Shaft end: NT50 ◆Spindle rotation speed: 3000 to 10000 rpm ◆ATC: 8 lines ◆Pull stud: P50T (MAS2 type) ◆Power capacity: Approximately 30 kW ◆Dust collection unit (spindle section) Inlet: φ200 mm x 1 port ◆Dust collection hopper: Inlet φ125 mm x 2 ports_If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆OSP-E100M 3D-D ◆XYZ: 5000×3700×1000mm (Absoscale) ◆W-axis: 1300mm/3m/min (Absoscale) ◆Table: 3800×2500mm ◆Spindle speed: 10~6000rpm ◆Tool shank shape: MAS standard BT50 ◆ATC100 ◆Automatic head attachment/detachment/indexing device: 5 degree indexing [Attachment] ※Extension head: MAX6000rpm ※Accelerated extension head: 5000~10000rpm/5° indexing ※90°angular head: MAX3000rpm/5° indexing

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Maximum workpiece dimensions: diameter Φ500mm/height 350mm ◆XYZ: 350×550×510mm ◆A-axis travel (table tilt/0.0001 degree indexing): -120°~+30° ◆C-axis travel (table rotation)/0.0001 degree indexing): ±360° ◆Distance from spindle end to table top (table horizontal): 50~560mm ◆Distance from spindle end to table center (table vertical): 40~550mm ◆Table load capacity (evenly distributed): 300kg ◆Spindle taper hole: 7/24 taper No.40 ◆Spindle rotation speed: 35~12000min-1 ◆Spindle bearing inner diameter: 80mm ◆Table dimensions: Φ500*400mm width ◆Number of tools stored: 30 tools [Special specifications] ・Prepared for mounting hydraulic jigs 6.9MPa, 4 ports, Φ500*400T groove table 1P: Clamp, 1P: Unclamp, 2P: Seating/front door automatic opening and closing (with area sensor) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Power supply: Matrix ◆Travel XYZ: 510×510×460 ◆Travel AC: +30°〜-120°,±360° ◆Distance from table top to spindle end: 190〜650mm (table surface) ◆Table work surface size: Φ500×W400 ◆Maximum workpiece dimensions: Φ500×405 ◆Maximum table load mass (evenly distributed): 300kg ◆Table top shape: 18mm T-slot × 5, 80 pitch ◆Spindle rotation speed: 12000min-1 ◆Spindle taper hole: 7/24 taper NO.40 ◆Spindle bearing inner diameter: Φ80 ◆Fast forward speed XYZ axis/A axis/C axis: 52000mm/min, 10min-1, 25min-1 ◆Cutting feed speed XYZ-axis/A-axis/C-axis: 1-52000mm/min, 1-10min-1, 1-25min-1 ◆Minimum index angle A-axis, C-axis: 0.0001 ◆Tool shank shape: BT-40 ◆Number of tools that can be stored: 30 ◆Maximum tool diameter/length/mass: Φ80mm/300mm/8kg ◆Maximum tool diameter when there are no adjacent tools: Φ125mm ◆Tool selection method: Address-fixed automatic shortcut method ◆Tool change time: 4.5 seconds ◆Spindle motor: (1 min/30 min/continuous rating): 26.4/22/15kw ◆Coolant motor: 0.230/0.365KW ◆Power supply: 36.6/44.5kVA (continuous/30 min) ◆Air pressure source: 360NL/min ◆Machine mass: 7500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆XYZ:500×450×400 ◆Spindle rotation:14000rpm◆HSK-A63 ◆ATC:30 ◆Spindle in-machine measurement OMP60 ◆4-stage signal light ◆Tool measurement TT140 ◆Spindle coolant/air switching specification ◆Coolant gun ◆Spindle pulse handle ◆Tropical package (in-panel cooler) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆professional-5 (Super Gl, 4 control) ◆Table 〇500 (0.0001 indexing) ◆T-slot: 18mm ◆XYZ: 550×1000×500 ◆Rotation 50-20000rpm ◆Spindle: HSK-A63 ◆ATC: 60 ◆Through spindle (8.0MPa) *With scale feedback_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko