78 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Tester | Akashi Seiisakusho | ARK-F2000 | 2004 |
○Main specifications Easy operation for material hardness testing Easy-to-use desktop Rockwell hardness tester Enter test conditions interactively Determine the height with the up and down handles, then operate with automatic motor drive. By setting the upper and lower limits, pass/fail judgment test inspection is easy. ○Sample size Maximum dimensions L145 x H255mm ○Hardness test Applicable C scale, B scale ○Test load Dial switching 60, 100, 150 kgf Load control Automatic = load, hold, unload Motor drive ○Device size Dimensions Width 220 x Depth 620 x Height 830 mm Weight Approximately 60 kg ○Accessories Flat round anvil φ65mm x 1 Indenter C scale x 1 B scale Not included
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
C-Frame Press | AMADA | TP60FX | 2020 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
C-Frame Press | AMADA | TP60FX | 2021 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
NCAuto-Lathe | CITIZEN WATCH | M32-Ⅲ | 2011 |
[Turret axis Y2 function is not available] ○NC unit MELDAS 635L○Capacity/Workpiece Maximum machining diameter φ32mm Maximum machining length 320mm Maximum front hole diameter φ12mm Maximum tap M10 Maximum back hole diameter φ10mm Maximum tap M8○Spindle Front spindle speed 8000rpm Back spindle speed 7000rpm○Number of blades 22 Comb blades Turning 5 + Milling 4 Back hole drilling 3 Turret blade rest 10○Motor Spindle 3.7/7.5kw Back 2.2/3.7kw○Machine size Dimensions Width 2805mm + Chipcon 1040mm x Depth 1240mm x Height 1900mm Weight 2950kg○Material feeder Autobar Ikura OS325E Material length 3.0m
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
NCAuto-Lathe | CITIZEN WATCH | RL02-V | 2009 |
○NC unit 1F5 FANUC-0iTC *Y-axis additional option, 3-axis specification○Spindle capacity Collet chuck Air opening and closing type Maximum machining chuck diameter φ20mm Maximum machining length 70mm Spindle speed 8000rpm Maximum drilling diameter φ8mm Maximum tapping diameter M6○Number of tools attached Gang type 6○Motor For spindle 1.5/2.2kw○Required power source Power consumption 3.0KVA○Machine size Main unit: Width 1283 x Depth 1100 x Height 1500mm Weight: 1100kg○Others Spindle indexing unit 15°Mecha lock Rotary tool unit with Y-axis
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
NC Lathe | Dainichi Machinery | MG65ｘ190 | 2019 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Vertical Machining Center | DMG MORI | CMX1100V | 2023 |
High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Vertical Machining Center | DMG MORI | CMX1100V | 2023 |
High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Vertical Machining Center | DMG MORI | CMX1100V | 2023 |
High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
NC Lathe | DMG MORI | CL2000B | 2016 | - |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Vertical Machining Center | FANUC | ROBODRILL α-D14MiB5 | 2017 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Lathe | HASEGAWA MACHINE WORKS | WHN-1 | 1984 |
Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Tool Grinder | ITO SEISAKUSHO | DP-3N | Unknown |
Capacity: Table swing φ200mm Headstock taper hole NT40 Distance from headstock center to table surface 120mm Table Working area 145mm×620mm Left/right stroke 270mm Front/back stroke 190mm Grindstone spindle head Up/down stroke 170mm Horizontal rotation 130° Front/back tilt ±20° Grindstone spindle speed [50/60Hz] 2650, 3300rpm/3100, 4000rpm Grindstone spindle motor 0.2kw Machine size: Floor area 850mm×1000mm Weight 300kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Vertical Milling Machine | Iwashita | NK-1R | 2006 | Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details | |
|
Vertical Milling Machine | Iwashita | NK-1R | 2004 |
○Digital 3-axis digital Minimum display 0.005mm○Table Working area 1100mm x 270mm T-slot width 16mm x 3○Spindle Spindle hole No. 40 Spindle speed 67-3000/80-3600rpm 50/60Hz Head swivel angle Left and right ±90°○Stroke Table Left and right 600mm x front and back 270mm x up and down 400mm Spindle quill up and down 100mm Distance from spindle center to front of column 170-570mm Ram front and back 400mm○Feed speed Table left and right cutting feed speed 17-634mm/min Table left and right rapid traverse speed 2900mm/min Quill automatic feed 0.05-0.08-0.15mm/rev○Motor 1.5kw4P for spindle 0.4kw for cutting feed○Machine size Dimensions: Width 1750mm x Depth 1630mm x Height 2150mm Weight: 1500Kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Vertical Machining Center | KITAMURA MACHINERY | Mycenter-4XiD | 2018 |
○NC unit Arumatik-jr○Table Working surface size 1120mm x 500mm Maximum load mass 1000kg○Travel amount X axis 1020mm Y axis 510mm Z axis 510mm Distance from table top to spindle end 100mm to 610mm○Spindle BT40 ATC 40 pieces Rotation speed 12000rpm○Feed rate Rapid traverse rate XY axis: 48000mm/min Z axis: 42000mm/min○Machine size Dimensions Width 2415mm x Depth 2293mm x Height 2817mm Weight 6000kg ○Others Renishaw Tool length and tool diameter compensation system Renishaw touch probe Spindle through 1.5Mpa
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |