1~10 of 10 entries
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
EDM (Hole-Driller) | Mitsubishi Electric | RH3525 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | ||
|
|
EDM (Hole-Driller) | メルコメカトロシステム | MEM-H8N | 2005 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
EDM (Hole-Driller) | Sodick | K1C | 2006 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
EDM (Hole-Driller) | Sodick | K1C | 2000 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
EDM (Hole-Driller) | Sodick | K1C | 2007 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
EDM (Hole-Driller) | Sodick | K1C | 2006 |
Table size 250 x 350 Stroke X200 Y300 Z300 W250 Maximum workpiece size 250 x 350 x 300 Electrode diameter 0.25 to 3.0
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
|
EDM (Hole-Driller) | Sodick | K1C | 2005 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
EDM (Hole-Driller) | Mitsubishi Electric | RH3525 | 2017 |
Table size 600 x 300 Stroke X350 Y250 Z350 W200 Maximum workpiece size 400 x 250 x 330 Electrode diameter 0.1 to 3.0
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
EDM (Hole-Driller) | メルコメカトロシステム | MEM-H8N | 2005 |
Numerical control: Mitsubishi, input method by touch panel, XYZ + cutting depth = 4-axis NC control, minimum setting unit 0.0001mm, up to 1000 machining conditions can be registered, equipped with XYZ linear scale position detection device. Travel: X-axis 300mm, table left and right, Y-axis 200mm, saddle front and back, Z-axis 200mm, spindle up and down, Z-axis servo stroke (cutting depth) 345mm. Table: Working area 400mm x 300mm, maximum allowable workpiece 150kg, maximum workpiece height 200mm. Electrode: Electrode mounting diameter φ0.2 to φ3.0mm. Tank: Machining fluid capacity 20L. Power supply: Maximum machining current (peak) 30A. Required power source: Electricity 3.5KVA. Machine size: Dimensions: Width 700mm, Depth 1000mm, Height 1850mm, Weight 500kg.
|
Ibaraki | TOSHIN MACHINE TOOL CO.,LTD． | Details |
|
|
EDM (Hole-Driller) | 日本放電 | JEM-25A | 2005 |
Table size 450 x 200 Stroke: X300 Y200 Z370 Electrode 0.2-3mm XYZ digital counter Maximum workpiece weight 100kg
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |