Table dimensions 780mm x 630mm, maximum workpiece dimensions 1050mm x 800mm x 295mm, axis travel ?500mmY350mm?300mm, wire electrode diameter 0.1-0.3mm, taper processing device standard equipment, 2 new filter elements, July 19, 2021 Please refer to the measurement accuracy inspection sheet (PDF file) at the site (constant temperature room) where the machine was used.

EndoKikaiKogyo.INC

★The prices have been revised further!

Kobayashi Kikai Co.,Ltd.

FANUC-31i-W MODEL B, S:600×400×310

Kinoshita Machinery Co., Ltd.

Table size 250 x 350 Stroke X200 Y300 Z300 W250 Maximum workpiece size 250 x 350 x 300 Electrode diameter 0.25 to 3.0

Kobayashi Kikai Co.,Ltd.

Table size 400 x 450 Electrode mounting diameter φ0.25-3.0

Kobayashi Kikai Co.,Ltd.

Kobayashi Kikai Co.,Ltd.

Table size 600 x 300 Stroke X350 Y250 Z350 W200 Maximum workpiece size 400 x 250 x 330 Electrode diameter 0.1 to 3.0

Kobayashi Kikai Co.,Ltd.

W21FAS-2 Table size 780 x 630 Stroke X500 Y350 Z300 UV±75 Wire diameter 0.1-0.3 Maximum workpiece dimensions 1050 x 800 x 295 ★Further price revision!

Kobayashi Kikai Co.,Ltd.

○NC unit W41MV-MC○Workpiece dimensions Maximum workpiece 810×700×215mm Workpiece weight 500kg○Table U-shaped surface plate Left and right 640×Depth 450mm○Axis travel X-axis 400×Y-axis 300×Z-axis 220mm U-axis ±60×V-axis ±60mm Maximum taper angle 15° at maximum 200mm○Wire Wire electrode diameter used φ0.1～φ0.3mm Currently φ0.2 die○Machining fluid tank Capacity 550L Filtration: 2 paper filters○Power source Power supply 13.5KVA Air source 0.5～0.7Mpa Flow rate 75L/min or more○Size of entire machine Dimensions Width 2025×Depth 2760×Height 2015 Total weight 3220kg Main unit 2700kg Power supply 220kg NC 20kg Tank: 280 kg

TOSHIN MACHINE TOOL CO.,LTD．

Kobayashi Kikai Co.,Ltd.

Numerical control: Mitsubishi, input method by touch panel, XYZ + cutting depth = 4-axis NC control, minimum setting unit 0.0001mm, up to 1000 machining conditions can be registered, equipped with XYZ linear scale position detection device. Travel: X-axis 300mm, table left and right, Y-axis 200mm, saddle front and back, Z-axis 200mm, spindle up and down, Z-axis servo stroke (cutting depth) 345mm. Table: Working area 400mm x 300mm, maximum allowable workpiece 150kg, maximum workpiece height 200mm. Electrode: Electrode mounting diameter φ0.2 to φ3.0mm. Tank: Machining fluid capacity 20L. Power supply: Maximum machining current (peak) 30A. Required power source: Electricity 3.5KVA. Machine size: Dimensions: Width 700mm, Depth 1000mm, Height 1850mm, Weight 500kg.

TOSHIN MACHINE TOOL CO.,LTD．

◆FANUC Series16-w ◆Table stroke: 520 x 370 mm ◆Z-axis stroke: 300 mm ◆UV-axis stroke: ±60 x ±60 mm ◆Wire diameter used: φ0.1 to 0.3 mm ◆Wire tension: 200 to 2500 g ◆Minimum table movement: 0.0001 mm ◆Maximum wire weight: 6 kg ◆Tank capacity: 530 L ◆External dimensions: 980 x 1400 x 1200 mm _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Inner dimensions of processing tank: W1100×D750×H400cm ◆Maximum dimensions of workpiece: W1050×D700×H300cm ◆Allowable workpiece weight: 1000kg ◆Table size: W850×D600cm ◆XYZ: 500×400×350cm ◆Allowable electrode weight: 100kg ◆Required floor space size: W2124×D2300×H2375cm ◆Machine weight: 3700kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆Inner dimensions of machining tank: W770×D500×H230mm ◆Maximum workpiece dimensions: W740×D470×H130mm ◆Allowable workpiece weight: 550kg ◆Table size: 500×350 ◆Distance to floor surface/table top: 900 ◆XYZ: 300×250×250 ◆Maximum electrode weight: 25kg ◆Main body weight: 2000kg *If there is a difference between the specifications without C-axis and the actual product, the actual product will take precedence.

ShinMaywa Kiko

Maximum workpiece dimensions: 580x390x170, XYZ stroke: 410x260x170, Maximum processing speed: 300mm2/min★

TokyoEngineering

Maximum workpiece dimensions: 580x390x170, XYZ stroke: 410x260x170, Maximum processing speed: 300mm2/min★

TokyoEngineering