1571 entries, 1~16 shown
Card View
| Product Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
JAPAN AUTOMATIC MACHINE | HYP-505H | 2007 | Tokyo |
Intex, Inc.
|
Details | ||
|
Servo Press | Komatsu | H1F150 | 2003 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Sub-tank | HITACHI | ST-230C |
Total volume: 230L; Maximum operating pressure: 1.02MPa; Water pressure test pressure: 1.53MPa
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Chip compressor | YUKEN KOUGYO | YK-40V-H1-1101 | 1995 |
3-phase 200V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
50t press | 後藤鉄工所 | GHT-50S | 2011 | Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Powder forming machine | NPAシステム | N2053-00 | 2011 |
External dimensions: 400 x 450 x 900 mm (height)
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
compressor | コベルコ | SG235ADIII-15 | 2017 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
|
vendor | AMADA | RG-50 | 2005 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Sub-tank | HITACHI |
Volume: 280 L; Maximum operating pressure: 10.4 kgf/cm²; Water pressure test pressure: 15.6 kgf/cm²
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | ||
|
Drill press | KIRA | NSD-340 |
Capacity 3-13mm, Spindle speed 415/500-2300/2800rpm 50/60Hz, Round table 280mm, Stroke 80mm, Weight 72kg, 100V, Three-phase 200V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drill press | KIRA | NSD-340 |
Capacity 3-13mm, Spindle speed 415/500-2300/2800rpm 50/60Hz, Round table 280mm, Stroke 80mm, Weight 72kg, 100V, Three-phase 200V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
CNC EDM | Sodick | AG360L | 2013 |
Control unit : LN1W (SI-LINK)
Maximum workpiece dimensions :
550 × 380 × 220 mm (jet machining)
550 × 380 × 170 mm (immersion machining)
Maximum workpiece mass :
400 kg (jet machining)
300 kg (immersion machining)
Machining tank internal dimensions : 894 × 720 mm
Travel X : 360 Y : 250 Z : 220 mm
U × V : 80 × 80 mm
Taper machining control angle (at 80 mm thickness) : ±20°
Wire electrode diameter : φ0.15–φ0.3 mm
Wire feed speed : 420 mm/sec
Wire bobbin mass : 8 kg
Electrical capacity : 3-phase 50/60Hz 13 kVA
Required floor space : 1,785 × 2,260 mm
Height : 2,065 mm
Machine weight : 2,700 kg
Maximum discharge current: 40 A
Service tank unit dimensions : 800 × 2,080 × 1,895 mm
Machining fluid capacity : 590 liters
Mass (dry) (including power supply) : 585 kg
Machining fluid filtration method : Paper filter replacement type (internal pressure, dual‑cylinder type)
Eco Ion : Ion‑exchange resin (18‑liter specification)
|
Nara Prefecture |
AK TECHNOS CO., LTD.
|
Details |
|
Servo Press | アイダ | DSF-C1-2000A2 | 2015 |
200t, Stroke count -50, Stroke length 250, Die height 450, Slide adjustment range 110, with descent cushion.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
press | ミカドテクノス | MKT10-7070 | 2022 | Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
compressor | MITSUI SEIKI KOGYO | Z225AS2-R | Unknown | Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Reciprocating compressor | HITACHI | 7.5P-9.5VP5 |
Three-phase 200V 50Hz 10 horsepower (7.5kW) Maximum pressure 0.93MPa Air output 840L/min
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |