72827 entries, 8177~8192 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Die | AMADA | T-5A |
Upper type (height-up attachment) Split type Length: 276.5m (14.5/19.5/24.5/29.5/39.5/49.5/99.5mm) Effective height: 100mm Thickness: 50mm Modular type The photo shows a representative model.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Die | AMADA | T-5A |
Upper type (height-up attachment) Split type Length: 276.5m (14.5/19.5/24.5/29.5/39.5/49.5/99.5mm) Effective height: 100mm Thickness: 50mm Modular type The photo shows a representative model.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Debs | 尾崎製作所 PEACOCK | T-2W | Unknown |
0-20
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
Debs | 尾崎製作所 PEACOCK | T-2W | Unknown |
0-20
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
Debs | 尾崎製作所 PEACOCK | T-2W | Unknown |
0.01
|
- |
Kei-Machine Co.,Ltd.
|
Details |
|
Debs | 尾崎製作所 PEACOCK | T-2C 0,01×10mm | Unknown |
If there is a discrepancy between the content and the actual product, the actual product will take precedence. , [Online tour available] , *Prices/inventory quantities are listed in the machine link URL below.
|
Chiba Prefecture |
EndoKikaiKogyo.INC
|
Details |
|
Others | 豊岡工業製作所 | T-2 | Unknown |
Stroke length: 35 to 85, Work dimensions: 130*70
|
Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details |
|
Debs | PEACOCK | T-2 |
Measurement range: 0-10mm, graduation: 0.01mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Debs | PEACOCK | T-2 |
Measurement range: 0-10mm, graduation: 0.01mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Work/Product Holder | -- | T-1535 |
Main unit dimensions: 350 x 150 x h70 mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Internal Grinder | 東洋 | T-1334 | 1980 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Internal Grinder | TOYO MACHINERY & METAL | T-133 | 1977 |
Workpiece inner diameter: φ560, table swing: φ1000, table maximum stroke: 1000mm★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
NCInternal Grinder | Toyo Advanced Technologies | T-11JAS | 2007 |
◆TOYOMATIC4000 ◆KITAGAWA IC-10 chuck ◆Table swing: φ600 ◆Spindle speed: 100-800r/min ◆Spindle swivel angle: -1 to 15 degrees ◆Table stroke: 500mm ◆Cutting travel amount (forward side) 110mm (backward side) 60mm ◆Grinding method: NC oscillation & plunge grinding ◆Simultaneous control axes (2 axes) ◆Weight: 2T *Separate tank (BUNRI AUTO-20) _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Tester | コニカミノルタ | T-10A | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
Compressor | 前田シェル | T-107A-1000 【新品】 | Unknown |
◆ Filtration accuracy (μm): 0.01 ◆ Operating pressure (MPa): 0.3 to 0.97 ◆ Maximum flow rate: 750L/min (at 0.7Mpa) ◆ Connection diameter: Rc1/2 ◆ Width 120 x Depth 138 x Height 316 mm ◆ Operating temperature range: 5 to 60°C _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Compressor | 前田シェル | T-105FS 【新品】 | Unknown |
◆For Maeda Shell T-107A-1000◆Set product of second filter oil mist element_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |