◆Control device: OSPU100L ◆Hydraulic tailstock: Dead type MT No.5 ◆Hydraulic chuck: B-212 ◆Swing above bed: Φ620 ◆Swing above carriage: Φ480 ◆Center distance: 675 ◆Maximum machining diameter: Φ420 ◆Maximum machining length: 650 ◆Travel amount XZ: 300(210+90)×1275 ◆Spindle rotation speed: 35-3500 ◆Number of spindle speed change ranges: Automatic 2-stage (VAC motor winding switching) ◆Spindle end: JIS A2-8 ◆Spindle through hole diameter: Φ80 ◆Spindle bearing inner diameter: Φ120 ◆Tool post: V12M ◆Number of tools mounted on tool post: L12 ◆Shank height of square tool: 25 ◆Diameter of shank of boring bar: Φ40 ◆Tool post indexing time: 0.2 ◆Rapid traverse speed: X20000/Z25000 ◆Cutting feed speed: X, Z 0.001 to 1000000 ◆Tailstock shaft diameter: Φ100 ◆Tailstock shaft tapered hole type: MT No.5 (rotating center) ◆Tailstock shaft travel distance: 150 ◆Spindle motor: VAC 22/15 (30 min./continuous) ◆Feed shaft motor: X: BL4/Z: BL6 ◆Cutting agent motor: Chip side discharge: 0.25, rear discharge: 0.8 ◆Power supply: 29.5 (continuous) ◆Machine height: 2110 ◆Required floor space: 3980 x 1900 ◆Machine weight: 5400 *Special specifications◆Touch setter: M ◆Easy dialogue kit◆Program store capacity Tape length 320 m → 640 m _If there are any differences between the specifications and the actual product, the actual product will take precedence.

OSP-200L 24-inch 3-jaw chuck, spindle speed 1400 rpm, center distance 2000, 12-sided turret, with fixed steady rest

Shank diameter Φ40 for Okuma LB-400-M

Collet chuck type, center distance 200mm. The photo shows the product in an uncleaned state.

OSPE-100L Collet chuck (50φ) 12-sided turret (with Y-axis) With tool presetter With parts conveyor With parts catcher Auto bar 1m specification (ASQ-51)

OSP-P200LA 6-inch 3-jaw chuck (Kitagawa/B206) 12-sided turret (compound) center distance 500 with center, loader, tool presetter, rear-loading chip conveyor

OSP-P300L 8-inch 3-jaw medium chuck (Kitagawa/B-208) 12-corner turret with chip conveyor, mist collector, cutting tank, and loader

OSP-E100L 10-inch 12-sided turret with center, right-hand chip converter

OSP-E100L 10-inch 3-jaw chuck, drop-down chuck, 12-sided turret (combined), touch sensor, right-hand chip conveyor

OSP-E100L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor

S/N 0557 Easy dialogue available OSP-U100L 12-sided turret Note) 8-inch scroll chuck ★

OSP-E100L Collet chuck 12-sided turret with Y-axis, touch sensor, parts catcher and oil skimmer

For cutting end faces, for Okuma LB3000, gripping width 38mm, hole pitch 45 x 80mm

For cutting end faces, for Okuma LB3000, gripping width 38mm, hole pitch 45 x 80mm

For cutting end faces, for Okuma LB3000, gripping width 38mm, hole pitch 45 x 80mm