4 motors, 4 ways, copper surface plate, surface plate cooling mechanism, fixed size included★

5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-Axis - Swivel-Milling-Head - Rotary-Table | x-travel: 800 mm | y-travel: 800 mm | z-travel: 800 mm | Control: iTNC 530 Heidenhain | Max. rpm: 18.000 min/-1 | power capacity - main spindel: 28 / 19 kW | max. Torque: 121 / 82 Nm | swivellable: B: 0 - 190 ° | swivle time: 1,2 s | table diameter: 900 x 700 mm | max. table load: 1.400 kg | rotatable: C: 360 ° | number of toolpositions: 40 pos. | tool taper: HSK-A63 | change-time chip to chip: ca. 5,0 sec | rapid traverse ( X / Y / Z ): 60 m/min | rapid traverse: C: 30 m/min | feed speeds: max. 60.000 mm/min | total power requirement: 64 kVA | weight of the machine ca.: 14,0 t | dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m | test probe: Heidenhain TS 640 | through spindle coolant: 40 bar | tool holders: 11x | tool monitoring: BLUM Laser

5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h - from training center | x-travel: 450 mm | y-travel: 400 mm | z-travel: 480 mm | control: MillPlus IT V600 Heidenhain | turning speed range - main spindle: max. 12.000 min/-1 | power capacity - main spindel: 10 / 15 kW | max. Torque: 130 Nm | swivellable: B: -95 / +30 ° | table surface area: Ø 450 mm | T-slots: 7x 14 x 63 mm | max. table load: 250 kg | rotatable: C: 360 ° | max. workpiecediameter: 380 mm | max. workpiece height: 670 mm | number of toolpositions: 16 pos. | tool taper: SK 40 | max. tool diameter: 80 mm | max. tool-dia with free toolbox: 130 mm | max. tool length: 250 mm | max. tool weight: 8,0 kg | feed speeds: max. 30.000 mm/min | rapid traverse: 30 m/min | Feed force ( X / Y / Z ): 7 / 13 / 10 kN | total power requirement: 27,6 kVA | weight of the machine ca.: 5,2 t | dimensions of the machine ca.: 3,1 x 3,0 x 3,0 m | test probe: Heidenhain TS 449 | Vice: Allmatic T-Rex 125

See the specification image. Maximum plate width 400 mm, maximum plate thickness 6.0 t

FANUC18i-MB BT50 ATC30 Spindle speed 6000 rpm Table size 1650 x 650 Stroke X1500 Y650 Z600 Left-hand chip conveyor Weight 8.1t

Lifting range: 80cm, Travel: 20cm, Tip load: 8kg, Single phase 100V. The photo shows the unit in an uncleaned condition.

FANUC31i-MA BBT50 ATC 40 pieces Table size 1350 x 560 Spindle speed 6000 rpm Stroke X1050 Y560 Z520 Tool length measuring device Touch sensor Mist Spiral conveyor

Chuck size 300 x 110 With left and right feed With up and down rapid feed 2-axis digital scale Spindle inverter control With separator

MAZATROL MATRIX 8-inch 4-jaw chuck for both main and sub (Kitagawa/HW-08) KM63 ATC 80 pieces Main and sub rotation speed 3000 rpm Tool rotation speed 12000 rpm Stroke X580 Y160 Z1045 W1050 With loader

MAZATROL MATRIX NEXUS 8-inch 3-jaw chuck (Kitagawa/B208) with 12-sided turret, tool presetter, and rear-loading chip conveyor

FANUC 0i-T 6-inch 3-jaw air chuck with octagonal turret and automatic door

MAZATROL MATRIX NEXUS BT40 ATC 30 pieces Table size 900 x 410 Spindle speed 18000 rpm Stroke X560 Y410 Z510 Tool length measuring device with touch sensor

Fanuc 21i-TB, Chuck: Φ600, Travel: Front/rear 450 x Up/down 310★

3m specification