◆1T [Accessories] Up and down buttons [Missing items] ・Power cord ・Motor cover_If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆490kg [Out of stock] ・Power cord and pendant_If there is a difference between the specifications and the actual product, the actual product will take priority.

[High speed type] ◆ Pressure capacity: 29.4kN ◆ Stroke length: 30 to 150mm ◆ Ram descent speed: 318mm/sec ◆ Ram ascent speed: 274.0mm/sec ◆ Operating pressure range: 35.4 to 106 ◆ Open height: 280mm ◆ Bolster: 350×240×30mm ◆ Shank hole: φ20×40 ◆ Motor output: 0.75kw ◆ Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆professional-5 (Super Gl, 4 control) ◆Table 〇500 (0.0001 indexing) ◆T-slot: 18mm ◆XYZ: 550×1000×500 ◆Rotation 50-20000rpm ◆Spindle: HSK-A63 ◆ATC: 60 ◆Through spindle (8.0MPa) *With scale feedback_In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.

Surface plate outer diameter: 510mm, 3 arms, with facing★

○Features Ultra-high speed, high precision, 5-axis controlled vertical linear motor machine○NC unit Matsuura L-Tech 30i (FANUC)○Table Top surface shape φ100mm Maximum load 20kg○Travel distance X-axis: 330mm Y-axis: 200mm Z-axis: 250mm B-axis: -110 to +10deg C-axis: 360deg Spindle end surface to table top surface B-axis 0deg = 0 to 250mm Maximum workpiece dimensions φ150mm x H150mm○Feed rate Rapid traverse (X, Y, Z) 90,000mm/min (B, C) 100/200mm/min Cutting feed (X, Y, Z) 1 to 90,000mm/min○Spindle Spindle rotation speed 43,000rpm Holder shank BBT30 ATC storage capacity 50○Motor For spindle AC7.5/5.5kw(10HP)○Required power source Electric capacity 30KVA○Machine dimensions and weight Width 1810mm Depth 3119mm Height 2404mm Weight 5120kg○Other accessories ・Mist collector ・Bloom non-contact laser tool length measurement ・RENISHAW optical automatic measurement/automatic centering ・Semi-dry generator ・Cutting oil temperature controller ・Coolant through device

Surface plate outer diameter: 510mm, 3 arms, with facing★

MSX-850Ⅲ(MELDAS) Main: 8-inch 3-jaw chuck Sub: 6-inch 3-jaw chuck 12-corner turret Tool presetter included Rear-mounted chip controller Loader included 3-column stocker (20 stations)

Modified product for single-sided lapping surface plate correction. Base plate receiver: Material: SUS410, Dimensions: Φ860×Φ120×t120mm. Weight: Approx. 92kg. Rotational precision: Face runout 20μm (when new). Repeated grooving possible (facing, spiral). Cutting axis manual handle digital display. Cutting tool air blow/suction mechanism. Electricity: 3-phase AC200V/9kVA, single-phase AC100V. Electrical equipment capacity 1.5kVA, breaker capacity 15A/30mA. Air: 0.5-0.7Mpa, 100NL/min, Rc3/8.

◆OSP-P200M-H ◆Spindle: BBT40 ◆15000min-1 ◆Pull stud JIS type (for through spindle) ◆ATC32 *In-machine chip disposal Coil type *Floor type chip conveyor *Bucket *Through spindle coolant: 1.5MPa *Shower cleaning device *Absolute scale XYZ *Automatic tool length compensation, automatic measurement (ONMP60) *Door interlock type? *OSP-P200M 3D-D *Super-NURBS Type A (XYZAC) *Anti-crash system *Touch probe available_If there are any differences between the specifications and the actual product, the actual product will take precedence.

★

◆XYZ:500×450×400 ◆Spindle rotation:14000rpm◆HSK-A63 ◆ATC:30 ◆Spindle in-machine measurement OMP60 ◆4-stage signal light ◆Tool measurement TT140 ◆Spindle coolant/air switching specification ◆Coolant gun ◆Spindle pulse handle ◆Tropical package (in-panel cooler) _If there is a difference between the specifications and the actual product, the actual product will take precedence.

★

◆Plate thickness that can be rolled: t1.0 to t9 ◆Plate width that can be processed: Maximum 500mm (t9 is 300mm) ◆Roll diameter: 500mm to 1600mm ◆R processing: R250 to infinity ◆Automatic operation mode: Yes ◆Dimensions: W1600mm including unit (main body 980mm) x D2511mm x H2949mm (roll holder) ◆Weight: 3.5t _If there are any differences between the specifications and the actual product, the actual product will take precedence.

Single phase 100V Maximum dimensions inside the tank: 600 x 500 x H750mm Printer: Fuyo Shoji/WORK21F-1 type/Body dimensions: 700 x 800 x H250mm/Maximum plate size: 400 x 550mm Dust collector: Amano/VF-5N type/Single phase 100V/0.4kw

○NC unit 1F5 FANUC-0iTC *Y-axis additional option, 3-axis specification○Spindle capacity Collet chuck Air opening and closing type Maximum machining chuck diameter φ20mm Maximum machining length 70mm Spindle speed 8000rpm Maximum drilling diameter φ8mm Maximum tapping diameter M6○Number of tools attached Gang type 6○Motor For spindle 1.5/2.2kw○Required power source Power consumption 3.0KVA○Machine size Main unit: Width 1283 x Depth 1100 x Height 1500mm Weight: 1100kg○Others Spindle indexing unit 15°Mecha lock Rotary tool unit with Y-axis