○Digital 3-axis digital Minimum display 0.005mm○Table Working area 1100mm x 270mm T-slot width 16mm x 3○Spindle Spindle hole No. 40 Spindle speed 67-3000/80-3600rpm 50/60Hz Head swivel angle Left and right ±90°○Stroke Table Left and right 600mm x front and back 270mm x up and down 400mm Spindle quill up and down 100mm Distance from spindle center to front of column 170-570mm Ram front and back 400mm○Feed speed Table left and right cutting feed speed 17-634mm/min Table left and right rapid traverse speed 2900mm/min Quill automatic feed 0.05-0.08-0.15mm/rev○Motor 1.5kw4P for spindle 0.4kw for cutting feed○Machine size Dimensions: Width 1750mm x Depth 1630mm x Height 2150mm Weight: 1500Kg

◆FANUC18iTB ◆Howa 12-inch chuck (solid) ◆Maximum swing: φ500 ◆Machining diameter x length: φ350 x 1020 ◆Bar processing capacity: φ78 ◆Distance between both centers: 1020 ◆Spindle through hole: φ92 ◆3500min-1 ◆V12 ◆XZ: 200 x 1020 ◆MT5 ◆Total power supply capacity: 32KVA ◆Machine size: W3,370 x D1,870 x H1825mm ◆Weight: 5,000kg

MSX-501 (FANUC) BT40 ATC40 Table size 600 x 400 2 pallets Spindle speed 12000 rpm Stroke X600 Y400 Z400 Tool length measuring device included Left rear chip conveyor

10-inch 3-jaw scroll chuck (Kitagawa/JN10RA6) Spindle through hole diameter 54 Center distance 800 Spindle speed 25-2000 rpm Swing above bed 490 Swing above carriage 260

◆OH-OSP-HMi ◆XYZ: 820×460×450 ◆Table: 1050×460 ◆Maximum workpiece weight: 500kg ◆♯40 ◆Spindle 20,000min-1 ◆ATC20 ◆Machine size: W2760×D3645×H2775mm *With dialogue function*No chip conveyor_If there are any differences between the specifications and the actual product, the actual product will take precedence.

W21FAS-2 Table size 780 x 630 Stroke X500 Y350 Z300 UV±75 Wire diameter 0.1-0.3 Maximum workpiece dimensions 1050 x 800 x 295 ★Further price revision!

◆FANUC Series 16iMB ◆XYZ: 700×400×330 ◆Table top surface to spindle end surface: 150-480 ◆Table working surface: 850×410 ◆Maximum table load capacity: 250kg ◆ATC: 21 ◆10000rpm ◆Machine dimensions: W2,115×D2,015×H2,236mm ◆Weight: 2100kg *Coolant tank included *Operating time: 28,390 hours_In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

◆OSP-E100M-H For 3D-D MC◆50 to 12000 min-1 ◆Tool shank shape: MAS standard BT50 ◆Table size: 560 x 1300 ◆High cross specification: +200 mm step up◆ATC: 32 *Lighting device: Change fluorescent lamp to spot light *Spindle end face constraint: Spindle BIG Plus *Spindle thermal displacement control TAS-S *Ambient thermal displacement control TAS-C *Absolute scale detection: XYZ axes *NC circular table installation (additional 2 axes) *Tilting circular table *Automatic tool length compensation Including breakage detection (touch sensor) *Touch sensor step up stand for high cross (+200 mm) *Touch sensor position: Rear left side of table *High class (simultaneous 5-axis control device) H specification *DNC connection DNC-DT 1G *Super-NURBS function available. If there are any differences between the specifications and the actual product, the actual product will take precedence.

○Main specifications Easy operation for material hardness testing Easy-to-use desktop Rockwell hardness tester Enter test conditions interactively Determine the height with the up and down handles, then operate with automatic motor drive. By setting the upper and lower limits, pass/fail judgment test inspection is easy. ○Sample size Maximum dimensions L145 x H255mm ○Hardness test Applicable C scale, B scale ○Test load Dial switching 60, 100, 150 kgf Load control Automatic = load, hold, unload Motor drive ○Device size Dimensions Width 220 x Depth 620 x Height 830 mm Weight Approximately 60 kg ○Accessories Flat round anvil φ65mm x 1 Indenter C scale x 1 B scale Not included

◆OSP-E100M 3D-D ◆XYZ: 5000×3700×1000mm (Absoscale) ◆W-axis: 1300mm/3m/min (Absoscale) ◆Table: 3800×2500mm ◆Spindle speed: 10~6000rpm ◆Tool shank shape: MAS standard BT50 ◆ATC100 ◆Automatic head attachment/detachment/indexing device: 5 degree indexing [Attachment] ※Extension head: MAX6000rpm ※Accelerated extension head: 5000~10000rpm/5° indexing ※90°angular head: MAX3000rpm/5° indexing

◆Type: High speed ◆Pressure capacity: 24.5-49kN ◆Stroke length: 30-150cc ◆Ram descent speed: 350cc/sec ◆Ram pressurization speed: 39cc/sec ◆Ram ascent speed: 360cc/sec ◆Open height: 285cc ◆Shank hole: Φ25×60cc ◆Power supply: 3Φ, AC200V, 10A ◆Motor output: 1.5kw ◆Body weight: 680cc _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆MAZATROL640M ◆XYZ:560×410×410 ◆Effective gate width:955mm ◆Table work surface:800×460mm ◆Spindle bearing inner diameter:φ80 ◆12000min-1 ◆BT40 ◆ATC30 ◆Machine dimensions:2440×2245×H2738mm ◆Weight:5,500kg

BT30, spindle 12000rpm, ATC 20 units, control device MSX-805, , If there is a difference between the contents and the actual product, the actual product will take precedence. , [Online tour available]

MSG-805Ⅲ(MELDAS) 10-inch 3-jaw chuck (Kitagawa/B-210) 10-sided turret with center *XZ axis ball screw replacement

MSG-805 (Meldas), MAPPS dialogue, 8-inch hollow chuck (Kitagawa B-208A8), 12-corner tool rest, with Y-axis, with rotary tool

Precision chart available (PDF), Fanuc180is-MB, ATC20, 12.000rpm, T:900*410, S(XYZ):600*410*460, Power on time 95634h, Cutting time 18058h, Helical interpolation, Rigid tap, Hyper HQ, Data server, Memory area Program storage capacity 1280m, LAN port, Coolant pump changed to medium pressure