71455 entries, 44897~44912 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Forming Grinder | Mitsui High-tec | MSG-250H1 | 1988 | Osaka |
Kei-Machine Co.,Ltd.
|
Details | |
|
Crimper | YOSHIKAWA IRON WORKS | US-66 | 1988 | Shizuoka Prefecture |
OTA YOSHIO MACHINE INDUSTRY CO.,LTD
|
Details | |
|
Desktop Lathe | 江黒 | LB10 | 1988 |
Collet chuck type, center distance 200mm. The photo shows the product in an uncleaned state.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Horizontal Type Boring Mills | YAMASAKI GIKEN | YZB-85 | 1988 |
Spindle speed: 45-1500 rpm, 3-axis digital
|
Chiba Prefecture |
KA Machine Co., Ltd.
|
Details |
|
Lathe | 滝沢 | TSL-550D | 1988 |
7-inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Surface Grinder | Mitsui High-tec | MSG-250H2 | 1988 |
Digital 2-axis (YZ axis), chuck 400 x 200
|
Chiba Prefecture |
KA Machine Co., Ltd.
|
Details |
|
Crimper | 吉川 | US-36 | 1988 |
Hydraulic type, three-phase 200V, capacity φ0.5-6mm, stroke 0-35mm, maximum pressure 700kgf, weight 150kg
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 滝沢 | TAL-460 | 1988 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Band Saw | MÖSSNER | Rekord SM 420 | 1988 |
Bandsaw MÖSSNER - Rekord SM 420 - Operating Hours: 2.651 h - Table swivable - incl. replacement saw blades: 1x 30,000 x 13 x 0.65mm 4x 30,000 x 6 x 0.65mm 1x 15m (6H) 13 x 0.9mm 1x 15m (10H) 13x 0.9mm | saw band length: 3.000 mm | max. workpiece height: 215 mm | table-size: 605 x 605 mm | cutting speed: 12 - 750 m/min | transmission ratio: 4 | throat: 410 mm | turning speed range: 39 - 2.460 U/min | total power requirement: 2 kVA | weight of the machine ca.: 0,6 t | dimensions of the machine ca.: 2,0 x 2,0 x 2,5 m
|
- |
Machine Tools Germany
|
Details |
|
Vertical Milling Machine | MAKINO | KSJP | 1988 |
Digital, up and down fast forward, with vise
|
Chiba Prefecture |
KA Machine Co., Ltd.
|
Details |
|
Lappers | tipton | CL-50 | 1988 |
Capacity: 50L
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
|
Cylindrical Grinder | TOYODA MACHINE WORKS | GUP32×100 | 1988 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Press Brake/Bender | Komatsu | PHS110×310 | 1988 |
110t Table length 3100 Stroke length 170 Gap depth 400 Open height 375 Auto back gauge (FINEBEND100)
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Press Brake/Bender | AMADA | RG-80 | 1988 |
Serviced, Auto back gauge? New replacement, New AC servo 2024, Z?
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Other | AMADA | SP-30Ⅱ | 1988 |
30t
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
C-Frame Press | アイダ | NC1-60(2) | 1988 |
60t Stroke length 140 Stroke number 70 Die height 300 Slide adjustment amount 70 Light safety attached
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |