32inch, cast iron surface plate★

Table swing: 170mm Center distance: 200mm Maximum grinding diameter: 60mm Grinding wheel size: 205x13(25)x50.8mm Grinding wheel speed: 3100rpm Swivel angle: ±30° Manual feed travel distance: 95mm Headstock swivel angle: ±45° Spindle speed: Maximum 800rpm Center taper: MT No.1 Tailstock travel distance: 15mm Tailstock center taper: MT No.1 Table swivel angle: ±10° Table handle feed amount: 200mm★.

Rotation speed: 12.5~1120rpm (14 stages) 3-jaw chuck size: 12 inches Bed swing: 630mm Reciprocating table swing: 400mm Maximum distance between centers: 1500mm Spindle through hole diameter: φ54 Side feed table travel distance: 380mm Top feed table travel distance: 200mm Tailstock shaft travel distance: 200mm Tailstock shaft taper hole: Morse taper No. 5 Bed length 2900mm Bed width: 425mm Main motor: 7.5kw 4P★

★

Swing: 400mm Chuck cover inner swing: 360mm Distance between chuck front and spindle end face: Maximum 1139mm Spindle taper: MTNo.3 Internal grinding spindle speed: 9000rpm (50Hz) 12000rpm (60Hz) Spindle speed: 20-300rpm Headstock taper: MTNo.5 Table diameter: 1055mm End face spindle speed: 3400rpm ★

6 axes, φ350 plate, weight pressure, axis distance 540, 1 motor★

Rotation speed: 28 to 1350 rpm, Chuck: Three-jaw φ235, Hole diameter φ70, Through hole diameter: φ52, Swing: Bed-mounted φ480, Tool holder φ280, Center distance: 1000, Made by Mitutoyo (PM-12L) with counter (2 axes) ★

300Wx500Lx85H　　P=2ｘ12★

◆Belt width: 200 / Length: 1000 _If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆ Swing on the swivel table: 300mm ◆ Travel of the sliding table: 260mm ◆ Maximum machining R: 50R (Travel of the grinding wheel axis) ・Up and down movement: 180mm ・Forward and backward movement: 100mm ・Left and right movement: 350mm ・Travel angle (horizontal): 270° ・Travel angle (vertical): 270° ◆ Grinding wheel rotation speed: 3800/6500rpm ◆ Usable grinding wheels: Flat type / Slotted type / Cup type ◆ Required floor space: 1500 x 1000mm ◆ Machine height: 1590mm ◆ Weight: 600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆ Swing on the swivel table: 300mm ◆ Travel of the sliding table: 260mm ◆ Maximum machining R: 50R (Travel of the grinding wheel axis) ・Up and down movement: 180mm ・Forward and backward movement: 100mm ・Left and right movement: 350mm ・Travel angle (horizontal): 270° ・Travel angle (vertical): 270° ◆ Grinding wheel rotation speed: 3800/6500rpm ◆ Usable grinding wheels: Flat type / Slotted type / Cup type ◆ Required floor space: 1500 x 1000mm ◆ Machine height: 1590mm ◆ Weight: 600kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm With up and down feed With XY digital scale

Punching 6t x 25φ Angle cut 6t x 800 x 80 (90 degrees) 6t x 50 x 50 (45 degrees) Bar net cutting: round 25φ, square 22φ Notching: (square) 6 x 50 x 55 (triangle) 6 x 70 x 35 Shearing 6t x 200 *50Hz specification (can be changed to 60Hz/additional cost)

◆Maximum tool diameter: 170mm ◆Tool length: 200mm ◆50R ◆Left/right movement: 200mm ◆Up/down movement: 150mm ◆Front/back movement: 100mm ◆Grindstone rotation speed: 2810rpm ◆Grindstone spindle motor: 200V 0.4kw ◆Required floor space: 550×400×H1350mm ◆Total machine weight: 380kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

10-inch 3-jaw scroll chuck, spindle through hole diameter 52, spindle speed 32-1800 rpm, center distance 850, swing above bed 435, swing above cross slide 250

◆Working surface: 1100X260 ◆Load capacity: 200kg ◆XYZ: 600X285X400 ◆Spindle taper: JIS NO.40 ◆70-4000min ◆Spindle head rotation angle: 45° ◆Machine dimensions: W2.2×D2.0×H2.1M ◆Weight: 1.85T *Includes SONY XY scale. In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.