NT50 Table size 1500 x 350 Stroke X850 Y350 Z540 3-axis feed (upper and lower cutting feed) XY digital scale

Temperature: -40℃ to 100℃ Tank dimensions: W500H750D600 Total usage time: 6586 hours★

◆XYZ: 1100×420×500 ◆Table: 2000×450 ◆Maximum load capacity: 1500kg ◆Spindle speed: 17-1350rpm ◆Total power supply capacity: 28KVA ◆Required installation area: 3710×2270mm ◆Weight: 6800kg *No arbor/support_If there is a difference between the specifications and the actual product, the actual product will take precedence.

10-inch 3-jaw scroll chuck, spindle through hole diameter 51, spindle speed 25-2000 rpm, center distance 1500, bed swing 575

NT40 Table size 1100×250 Spindle speed 75-4000rpm Stroke X550 Y250 Z350 With up/down and left/right feed With XY digital scale

◆Table: 310×1370 ◆XYZ: 870×370×400mm ◆Spindle tip: JIS No.50 ◆Rotation speed: 40-1750rpm ◆Machine size: W2775×D1825×H1745mm ◆Weight: 2,400kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

★

◆Table: 1100 x 200 ◆XYZ: 820 x 300 x 450 ◆Rotation speed (rpm): 75 to 3600 ◆NST40 ◆Spindle up and down travel distance: 140 ◆Ram front and back travel distance: 535 ◆Weight: 2100 kg *Digital scale (XY) *In the event of any discrepancies between the flange/handle specifications and the actual product, the actual product will take precedence.

NT50 Table size 1500 x 350 Spindle speed 45-1500rpm With XY axis digital scale With 3-axis feed (upper and lower cutting feed)

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm With up/down and left/right feed With XY digital scale

Used for electrode cutting. Capacity: Machining capacity φ70×L300 mm Swing above bed φ220mm Swing above saddle φ100mm Base dimensions: Bed width 155×total length 850 mm (2.8 shaku) Spindle: Standard compatible chuck 4-inch three-jaw End shape: Hasegawa standard Rotation speed: 50hz 650, 860, 1135, 1300, 1500, 1720, 2270, 3000rpm (8 stages) Through hole φ25.5 mm Tailstock: Tapered hole MT.No.2 Center distance 380 mm Thread cutting: Lead screw diameter φ22 mm Lead screw pitch 3 mm Thread cutting range 0.25 to 5 mm Motor: For spindle 1.5/0.75kw (4/8 pole conversion) Machine size: Dimensions: Width 1270 × Depth 570 × Height 1130 mm Weight: 650 kg ○ Other This product [WHN-1 type lathe] does not have automatic left/right and front/back feed. Also, since it is used for cutting copper electrodes, a flange is required to install the standard 4-inch chuck.

◆Table (left/right x front/back): 380 x 200 ◆Grinding area: 350 x 190mm ◆Table work surface: 350 x 160mm ◆Height from floor to table work surface: 1000mm ◆Grinding wheel spindle rotation speed: 50Hz 2900rpm/60Hz 3500rpm ◆Grinding wheel dimensions: 180 x 13 x hole diameter 31.75 ◆Weight: 600kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

★

2-axis digital