Center distance 800, bed top 360, forward 210, through hole φ40, 7-inch SC, 250 ind, 83~1800rpm

Kei-Machine Co.,Ltd.

[__There is a video. Please check it out below!] ◆ Swing above the cutting edge: 1100 ◆ Swing above the bed: 750 ◆ Swing above the saddle: 460 ◆ Center distance: 1500 ◆ Spindle speed: (50Hz) 4-400rpm/(60Hz) 5-500rpm ◆ Chuck diameter: 600φ ◆ Total bed length: 2900mm ◆ Required floor space: 1700×3450mm ◆ Weight: 5200kg *Tailstock included *XZ scale included *Gears for changing gear ratio 1 set_If there is a difference between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

◆DC9-II ◆Pressure: 25t ◆Stroke length: 100mm ◆Table length: 1200mm ◆Gap depth: 200mm ◆Open height: 300mm ◆Weight: 1.4T

ShinMaywa Kiko

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm With 2-axis digital scale

Kobayashi Kikai Co.,Ltd.

NT50 Table size 1350 x 400 Spindle speed 70-2200 rpm 3-axis feed XY axis digital scale

Kobayashi Kikai Co.,Ltd.

NT40 Table size 1100 x 250 with digital scale [Under adjustment]

Kobayashi Kikai Co.,Ltd.

[__There is a video. Please check it out from the video button at the bottom.] ◆Table length: 1000 x 800 x thickness 150mm ◆Maximum operating pressure: 250kg/c? ◆Inertia drop value: 20.5mm ◆Pressure capacity: 100t ◆Stroke: 500 ◆Open height: 750 ◆Emergency stop time: 330m/sec ◆Motor: 3.7kw ◆Machine size: W2008 x D1160 x H3275mm ◆Weight: 6t

ShinMaywa Kiko

◆Maximum distance between the surface of the column sleeve and the centre of the spindle: 1160 ◆Spindle stroke: 360mm ◆Column sleeve diameter: 340 ◆Spindle hole taper: MT No.5 ◆30-1500rpm ◆Main motor: 3.7kw ◆Base working area: 1,250 x 850mm ◆Base height: 190mm ◆Machine height: 2,815mm ◆Weight: 3,200kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

Automatic cycle grinding machine, with fixed size, center distance: 200mm, grinding wheel speed: 3100rpm, grinding wheel size: outer diameter φ205mm x inner diameter φ50.8mm, maximum width 25mm, headstock rotation angle: ±45°, spindle rotation speed: 200~1000rpm, table rotation angle: ±10°★

TokyoEngineering

◆Cutting thickness: 4.5? ◆Cutting length: 4055? ◆Stroke: 50spm ◆Motor horsepower: 11kw ◆Weight: 11T

ShinMaywa Kiko

Collet Chuck

Kobayashi Kikai Co.,Ltd.

◆Table top swing: 180° ◆Distance between centers: 400° ◆Table working surface: W105×D620° ◆Left and right movement: 250° ◆Swivel angle: 180° ◆Grinding wheel head forward and backward movement: 150° ◆Grinding wheel head up and down movement: 180° ◆Grinding wheel shaft rotation speed: 3800・6500rpm ◆Required floor space: 1165×1195° ◆Weight: 550kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

○Digital XY2-axis Minimum display value 0.005mm○Table Working surface 1100mm x 250mm T-slot Width 14mm x 3○Spindles Spindle shank NT40 Spindle speed 75-4000rpm (12-stage belt change) Spindle head rotation Left and right ±45 degrees Spindle motor 1.5kw○Axis travel Table movement Left and right 550 x front and back 250 x up and down 350 mm Spindle quill feed 100mm Overarm front and back movement 300mm Spindle end to table top 5-455mm Spindle center to column front 125-425mm○Machine size Dimensions: Width 2190 x Depth 1815 x Height 2180 mm Weight: 1550 Kg○Operation method Quill automatic cutting feed/feed possible Table left and right Automatic cutting feed/fast forward possible *Standard column type *There is no fast forward up and down movement of the table.

TOSHIN MACHINE TOOL CO.,LTD．

Capacity φ3-25 Grinding wheel φ125×63.5×45mm (diameter × hole diameter × thickness) Maximum operating speed 1500m/min Tip angle 90-190°

Kobayashi Kikai Co.,Ltd.

Rotation speed: 2940/3530rpm (50/60Hz), Grindstone diameter: Φ205x6-32xΦ31.75 (inner diameter), Table: 380x120 (tilting chuck ±90 degrees), Wet type★

TokyoEngineering

Automatic left/right, automatic cutting, rotation speed: 3550rpm (60Hz), grinding wheel diameter: Φ180x3-32xΦ31.75 (inner diameter), table: 380x120 (tilting chuck ±90 degrees), dry type★

TokyoEngineering