★

3-phase 200V 50/60Hz 3800/6500rpm

◆Riveting capacity: φ0.5 to φ5mm mild steel ◆Pressure force: 515kgf ◆Cylinder stroke: 5 to 40mm ◆Spindle motor: 120W AC200V 50/60Hz ◆Power supply: 3φ AC200V 50/60Hz 280VA ◆Supply air pressure: 4.2kgf/cm2 ◆Weight: 112kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆Maximum keyway width: 50mm ◆Maximum keyway length: 500mm ◆Hole diameter range of workpiece: 15 to 230mm ◆Cutting speed: 4 to 13m/min ◆Return speed: 22m/min ◆Cutting amount per stroke Tool No. 1, 2: 0.01 to 0.06mm ◆Cutting amount per stroke Tool No. 3, 4, 5: 0.02 to 0.12mm ◆Table size: 400 x 600mm ◆Main motor: 3.7_ ◆Drive method: Hydraulic ◆Main unit weight: 1450kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

30t stroke length 100 Daylight 500 with bag gauge

◆Table left/right: 200mm ◆Spindle taper hole: NT (＃)40 ◆Grinding wheel (cup wheel): 125φ×50φ×31.75 ◆Rotation speed: (50Hz) 3000rpm (60Hz) 3500rpm ◆Grinding wheel shaft: 200V 0.4kw×2P ◆Machine dimensions: W550×D400mm ◆Weight: 380kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

NT40 Table size 1100 x 250 Spindle speed 75-4000 rpm With left/right and up/down feed With XY axis digital scale

8 inch 3 jaw scroll chuck, center distance 650, spindle speed 60-1500 rpm

○Digital 3-axis digital display○Table Working area 1100×250 mm T-slot width 14mm×3○Spindle Spindle shank No.40 Spindle speed 225～4000rpm Belt change 10 stages Spindle head rotation Left and right ±45 degrees○Axis travel Table Left and right 550 × Front and back 250 × Up and down 350 mm Spindle quill feed 80mm Overarm front and back movement 300mm Spindle end face to table top 5～455mm Spindle center to column front 125～425mm○Machine size Dimensions: Width 2190mm × Depth 1815mm × Height 2080mm Weight: 1550 kg○Accessories Jaw width 125mm Takeda hydraulic vice included○Operation method Quill automatic cutting feed/feed-out possible Table left and right Automatic cutting feed/fast forward possible

◆Table left/right: 200mm ◆Spindle taper hole: NT (＃)40 ◆Grinding wheel (cup wheel): 125φ×50φ×31.75 ◆Rotation speed: (50Hz) 3000rpm (60Hz) 3500rpm ◆Grinding wheel shaft: 200V 0.4kw×2P ◆Machine dimensions: W550×D400mm ◆Weight: 380kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆Battery included_If there is a difference between the specifications and the actual product, the actual product will take precedence.

◆Table: 1100×250 ◆XYZ: 550×250×350 ◆Rotation speed: 75-4000rpm ◆JIS No.40 ◆Spindle: 1.5kw×4P ◆Weight: 1.55T _If there is a difference between the specifications and the actual product, the actual product will take precedence.

12-inch 4-jaw single-action chuck, spindle through-hole diameter 54, center distance 800, spindle speed 50-1500 rpm, swing above bed 470, swing above carriage 240

SN:7033 Operation not confirmed, sold as is

Capacity: 200t, Stroke: 300, Heating plate area: 400×420★