71454 entries, 44369~44384 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Tool Grinder | 大和 | CG-200N | 1980 |
◆Table left/right: 200mm ◆Spindle taper hole: NT (＃)40 ◆Grinding wheel (cup wheel): 125φ×50φ×31.75 ◆Rotation speed: (50Hz) 3000rpm (60Hz) 3500rpm ◆Grinding wheel shaft: 200V 0.4kw×2P ◆Machine dimensions: W550×D400mm ◆Weight: 380kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | 大隈豊和 | STL650 | 1980 |
8 inch 3 jaw scroll chuck, center distance 650, spindle speed 60-1500 rpm
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Vertical Milling Machine | MAKINO | KJP | 1980 |
○Digital 3-axis digital display○Table Working area 1100×250 mm T-slot width 14mm×3○Spindle Spindle shank No.40 Spindle speed 225～4000rpm Belt change 10 stages Spindle head rotation Left and right ±45 degrees○Axis travel Table Left and right 550 × Front and back 250 × Up and down 350 mm Spindle quill feed 80mm Overarm front and back movement 300mm Spindle end face to table top 5～455mm Spindle center to column front 125～425mm○Machine size Dimensions: Width 2190mm × Depth 1815mm × Height 2080mm Weight: 1550 kg○Accessories Jaw width 125mm Takeda hydraulic vice included○Operation method Quill automatic cutting feed/feed-out possible Table left and right Automatic cutting feed/fast forward possible
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Vertical Milling Machine | HITACHI SEIKO | 2MW-V | 1980 |
NT50 Table size 1350 x 310 Stroke X710 Y300 Z400 3-axis feed XY digital scale 50-1500rpm
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | ワシノ | LE-19K | 1980 |
12-inch 4-jaw single-action chuck, spindle through-hole diameter 54, center distance 800, spindle speed 50-1500 rpm, swing above bed 470, swing above carriage 240
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Lathe | 森精機製作所 | MR-1500G | 1980 |
Core 1500, Cut 750, Belt 520, Forward 300, Through hole φ52, 10-inch SC, 28~1350rpm, Fixed
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Forming Grinder | 三井 | MSG-250H1 | 1980 |
★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
|
Press | AMADA | SPH-60 | 1980 |
◆Pressure capacity: 588kN ◆Bending length: 835mm ◆Maximum stroke length: 150mm ◆Descent speed: 35-50mm/s ◆Pressure speed 50Hz low speed: 9mm/s, high speed: 18mm/s ◆Pressure speed 60Hz low speed: 10.8mm/s, high speed: 21.6mm/s ◆Ascension speed 50Hz: 59mm/s, 60Hz: 70.8mm/s ◆Frame gap: 510mm ◆Motor: 5.5kw ◆Oil capacity: 87L ◆Machine weight: 4.86t _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
|
Press Brake/Bender | AMADA | SPH-30C | 1980 |
30t stroke length 100 Daylight 500 with bag gauge
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Others | 吉川 | US-66 | 1980 |
◆Riveting capacity: φ0.5 to φ5mm mild steel ◆Pressure force: 515kgf ◆Cylinder stroke: 5 to 40mm ◆Spindle motor: 120W AC200V 50/60Hz ◆Power supply: 3φ AC200V 50/60Hz 280VA ◆Supply air pressure: 4.2kgf/cm2 ◆Weight: 112kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Robot | KANETSU | LME-25 | 1980 |
◆Battery included_If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
|
Universal Milling Machine | DECKEL | FP-3 | 1980 |
Stroke X400 Y400 Z400
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Others | HIKOKI | ABT4 | 1980 |
Power supply specifications: AC200V3.5A 3-phase 50/60Hz, Output: 0.75W, Rotation speed: 1490/1790rpm, Grindstone: 255x25x19.05mm, 2000m/min★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | JASCO | DVIDEC-40DVIDEC-40 | 1980 |
SN:7033 Operation not confirmed, sold as is
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
C-Frame Press | 遠藤プレス | BPA-25 | 1980 |
Capacity: 25t, Stroke number: 120spm, Stroke length: 100, Slide bottom area: 170x155, Bolster area: 600x350, Shank diameter: 31.75, Motor: 1.5kw6P★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Hydraulic Press | 日東精機製作所 | DA | 1980 |
Capacity: 200t, Stroke: 300, Heating plate area: 400×420★
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |