71526 entries, 44209~44224 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Contour Machine | AMADA | V-400 | 1970 |
Table dimensions: 600x580mm★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Others | 浜井産業(ハマイ) | 40 | 1970 |
S/NO.821★
|
Yamanashi Prefecture | TokyoEngineering | Details |
|
Desktop Drilling Machine | 特殊工機製作所 | 7BTT | 1970 | Mie Prefecture | ShinMaywa Kiko | Details | |
|
Lappers | ワシノ | GLP-60 | 1970 |
◆Diameter: 610mm ◆Effective diameter: 600mm ◆Rotation speed (50/60Hz): 20-70rpm ◆Capacity: Workpiece size 248mm ◆Spindle motor: 0.75kW ◆Dimensions: W1480×D980×H1200mm ◆Weight: 1,000kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Radial Drilling Machine | Okuma | DRA-J2000 | 1970 |
◆Drilling: 70mmΦ ◆Bore: 250mmΦ ◆Tapping: W2 1/2 ◆Column diameter: 550 ◆Maximum distance between column center and spindle: 2400 ◆Maximum/minimum distance between spindle end and base surface: 1890-610 ◆Up/down movement distance of arm: 880 ◆Spindle speed range (rpm) Right rotation: (50c/s) 14-1800 (60c/s) 18-2240 Left rotation: Approximately 1.4 times the right rotation ◆MTNo.5 ◆Up/down movement distance: 400 ◆Base dimensions: W300×D3285×H1320 ◆Base working area: 2145×1140 ◆Motor 5.5kw ◆Required floor area: 3600×1320 ◆Net weight (kg): 11500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Radial Drilling Machine | 若山精密工業 | NR-13A | 1970 |
◆Maximum spindle turning radius: 1,482 mm ◆Spindle left/right travel distance: 1,065 mm ◆Column sleeve diameter: 305 mm ◆Distance between spindle end and base surface (max. to min.): max 1380 to min 360 mm ◆Spindle up/down travel distance: 320 mm ◆Arm up/down travel distance: 700 mm ◆MT No. 4 ◆36~1700 rpm ◆Base working surface: 1,390 x 860 mm ◆Machine dimensions: W 2,122 x D 990 x H 2,555 mm ◆Weight: 3,100 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Others | TOKYO SEIMITSU | EMD-M30H | 1970 |
FS:15,30,60,150μm★
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Desktop Drilling Machine | 東京精巧舎 | SLT-7 | 1970 |
◆Capacity: 1~6.5m/m _If there is a discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Vertical Milling Machine | HITACHI SEKI | MS-V | 1970 |
◆XYZ: 600 x 250 x 360 ◆Size of working surface: 1100 x 270 ◆Rotation speed: 60 to 1800 rpm ◆NT50 ◆Cutting feed speed: (left/right, front/back) 16 to 1000 (up/down) 4 to 250 ◆Fast forward speed: (left/right, front/back, up/down) 2.8, 2.8, 0.7 ◆Main motor: 3.7kw _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Horizontal Milling Machine | OKK | MH-2P | 1970 |
◆Stroke: 720 x 260 x 360 ◆Distance between spindle centre and table top: 15 to 375 ◆Table dimensions: 1310 x 300 ◆Number and dimensions of table grooves: 3 x 18H8 ◆Spindle hole taper: JIS B6101 No.50 ◆Spindle rotation speed: 60 to 1800 rpm ◆Motor for spindle drive: 4 x 3.7 ◆Total power supply capacity: 7KVA ◆Required installation area: 2410 x 1620mm ◆Machine weight: 2800Kg *With arbor support_If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Tool Grinder | 松本 | MG-200 | 1970 | Mie Prefecture | ShinMaywa Kiko | Details | |
|
Radial Drilling Machine | SHIN NIPPON KOKI | RHH-25 | 1970 | - | KOWA MACHINERY CO.,LTD | Details | |
|
Projector | 神港精機 | VD16 | 1970 | Osaka Prefecture | OTOMO Machine Co. Ltd. | Details | |
|
Tilt | 日研 | NST-450 | 1970 |
Table diameter Φ450 15° indexing Weight 320kg
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Tool Grinder | MAKINO | C-40 | 1970 |
If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
|
Chiba Prefecture | EndoKikaiKogyo.INC | Details |
|
Dust Collector | 日本精密工業 | FB-1205-B | 1970 |
Atomic,, Dust collector,, FB-1205-B,, 200V・50Hz,, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/stock number is listed on the machine URL below*,
|
Chiba Prefecture | EndoKikaiKogyo.INC | Details |