71437 entries, 44113~44128 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Tool Grinder | 松本 | MG-200 | 1970 | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
Vertical Milling Machine | HITACHI SEKI | MS-V | 1970 |
◆XYZ: 600 x 250 x 360 ◆Size of working surface: 1100 x 270 ◆Rotation speed: 60 to 1800 rpm ◆NT50 ◆Cutting feed speed: (left/right, front/back) 16 to 1000 (up/down) 4 to 250 ◆Fast forward speed: (left/right, front/back, up/down) 2.8, 2.8, 0.7 ◆Main motor: 3.7kw _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | Okuma | DRA-J2000 | 1970 |
◆Drilling: 70mmΦ ◆Bore: 250mmΦ ◆Tapping: W2 1/2 ◆Column diameter: 550 ◆Maximum distance between column center and spindle: 2400 ◆Maximum/minimum distance between spindle end and base surface: 1890-610 ◆Up/down movement distance of arm: 880 ◆Spindle speed range (rpm) Right rotation: (50c/s) 14-1800 (60c/s) 18-2240 Left rotation: Approximately 1.4 times the right rotation ◆MTNo.5 ◆Up/down movement distance: 400 ◆Base dimensions: W300×D3285×H1320 ◆Base working area: 2145×1140 ◆Motor 5.5kw ◆Required floor area: 3600×1320 ◆Net weight (kg): 11500kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | 若山精密工業 | NR-13A | 1970 |
◆Maximum spindle turning radius: 1,482 mm ◆Spindle left/right travel distance: 1,065 mm ◆Column sleeve diameter: 305 mm ◆Distance between spindle end and base surface (max. to min.): max 1380 to min 360 mm ◆Spindle up/down travel distance: 320 mm ◆Arm up/down travel distance: 700 mm ◆MT No. 4 ◆36~1700 rpm ◆Base working surface: 1,390 x 860 mm ◆Machine dimensions: W 2,122 x D 990 x H 2,555 mm ◆Weight: 3,100 kg _In the event of any discrepancies between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Lathe | YAMAZAKIIRON WORKS | MAZAK-2500 | 1971 |
◆ Swing above bed: 460 ◆ Swing above carriage: 260 ◆ Center height from floor: 1000 ◆ Maximum distance between both centers: 2536 ◆ Spindle through hole: 80mm ◆ Spindle speed: 25 to 1500rpm ◆ Bed (width x total length): 370 x 3710mm ◆ Machine (length x height): 4120 x 1165mm ◆ Weight: 2,970kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Milling Machine | MAKINO | KJP | 1971 |
Digital: With XY digital display Table: Working area: 1100 x 250 mm, T-slot width: 14 mm x 3 Spindle: Spindle shank: No. 40 Spindle speed: 225-4000 rpm, 10-stage belt change Spindle head rotation: Left and right ±45 degrees Amount of movement of each axis: Table: Left and right 550 x front and back 250 x up and down 350 mm Spindle quill feed: 80 mm Overarm front and back movement: 300 mm Spindle end to table top: 5-455 mm Spindle center to front of column: 125-425 mm Machine size: Dimensions: Width 2190 mm x Depth 1815 mm x Height 2080 mm Weight: 1550 kg
|
Ibaraki |
TOSHIN MACHINE TOOL CO.,LTD．
|
Details |
|
Lathe | YAMAZAKIIRON WORKS | MAZAK-1500 | 1971 |
◆ Swing above bed: 460 ◆ Swing above carriage: 260 ◆ Center height from floor: 1000 ◆ Maximum distance between both centers: 1526 ◆ Spindle through hole: 80mm ◆ Spindle speed: 25 to 1500rpm ◆ Bed (width x total length): 370 x 2700mm ◆ Machine (length x height): 3110 x 1165mm ◆ Total weight: 2370g _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Vertical Milling Machine | OKK | MH-3V-2 | 1971 |
◆Table: 1650 x 380 ◆XYZ: 920 x 350 x 450 ◆Spindle taper: JIS B6101 ◆No.50 ◆45-1600 rpm ◆Required installation area: 3075 x 1860 mm ◆Machine weight: 4200 kg ◆Total power capacity 14 KVA *With Magnescale XY. If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Radial Drilling Machine | Okuma | DRB-E2500 | 1971 |
φ105, MT6, mass
|
Osaka |
Kei-Machine Co.,Ltd.
|
Details |
|
Others | TOSHIBA | SCS | 1971 |
Rotation speed: 5800 rpm (50 Hz), grinding wheel diameter: φ80
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Microscope | Olympus | MF | 1971 |
Eyepiece: 10x, Objective lens: 1 piece
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Tester | 高和 | ３R | 1971 | Osaka |
Kei-Machine Co.,Ltd.
|
Details | |
|
Desktop Lathe | PH6L-4H | 1971 |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details | |
|
Lathe | Takisawa Machine Tool | TAL-510 | 1971 |
・Swing above bed: 510mm ・Swing above cross feed table: 300mm ・Center distance: 1,000mm ・Spindle speed range: 25-1,020rpm ・Machine weight: 2,300kg★.
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
Radial Drilling Machine | 富永 | TRE1600 | 1971 | MIE |
KOWA MACHINERY CO.,LTD
|
Details | |
|
Arc | サンコー製作所 | BOOMELT SS-100 | 1971 |
Sanko Manufacturing Co., Ltd. Low-pressure resonance welding machine BOOMELT SS-100 , 100V/200V compatible machine , , If there is a difference between the contents and the actual product, the actual product will take precedence. , [Online tour is available] , *Price/stock number is listed on the machine URL below* ,
|
Chiba Prefecture |
EndoKikaiKogyo.INC
|
Details |