71527 entries, 26593~26608 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Vertical Milling Machine | SHIZUOKA MACHINE TOOL | VHR-A | 1987 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Other | DATE MACHINE | RS25-30 | 1987 |
Coil width: MAX 150mm Inner diameter: 300~508Φ Outer diameter: 1000Φ Weight: 300kg Plate thickness: 0.8~1.0
|
Shizuoka Prefecture | OTA YOSHIO MACHINE INDUSTRY CO.,LTD | Details |
|
Vertical Milling Machine | SHIZUOKA MACHINE TOOL | VHR-SD | 1987 |
XY Digital
|
Chiba Prefecture | KA Machine Co., Ltd. | Details |
|
Lathe | 滝沢 | TSL-550 | 1987 |
7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Projector | TOKYO SEIMITSU | surfcom900B | 1987 |
AC: 100V 50/60Hz Air source: 343-686kPa Measurement range 25μm Measurement force: 0.01-0.3mN Microscope: Magnification 25x With auto leveling Driving distance: 0.1-30mm (digital display) Driving speed: 0.003, 0.03, 0.3mm/s (return 0.6mm/s) Table size: φ116 Maximum loading diameter: φ200mm Swivel rotation: 360° Leveling range: ±2° Traverse range: ±6.5mm (10μm reading) Measurement height: 25mm Load capacity: 1Kgw
|
Ibaraki Prefecture, | TokyoEngineering | Details |
|
Powder Molding Press | SUMMIT-99 | 1987 |
Pressure: 99 tons, Filling depth: 130mm, Molding speed: Max. 20 spm, Max. molded product diameter: 100mm, Motor: 22kw★
|
Ibaraki Prefecture | TokyoEngineering | Details | |
|
Powder Molding Press | 200-1P-9H | 1987 |
Punch center distance x number of punches: PCD200x9x1 point Maximum pressure: 4T★
|
Ibaraki Prefecture | TokyoEngineering | Details | |
|
Lathe | 滝沢 | TSL-550 | 1987 |
7 inch 3-jaw scroll chuck, center distance 550, spindle speed 83-1800 rpm, spindle through hole diameter 35, swing above bed 360, swing above carriage 210 *This is a machine that was used at school.
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Hydraulic Press | 阿部精機 | CDS-2000TS | 1987 |
Pressure capacity: 100Ton, Lifting capacity: 48Ton, Table bolster area: 1300x1000mm, Slide bolster area: 1300x1000mm, Daylight: 1300mm, Slide stroke: 1300mm, Shut height: 0mm, Reversal angle: 180 degrees, Reversal capacity: 2Ton★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
C-Frame Press | AIDA ENGINEERING | PC-30(1) | 1987 |
Pressure capacity: 30tf Stroke length: 80mm Die height: 200mm Slide adjustment amount: 55mm★
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
|
Press Brake/Bender | AMADA | SPH-30C | 1987 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
Lathe | ワシノ | LEOG-80A | 1987 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
Vertical Milling Machine | OKK | MH-5VJ | 1987 | Saitama | Kobayashi Kikai Co.,Ltd. | Details | |
|
Turret Punch Press | AMADA | ARIES-245 | 1987 |
20st, 2A/I, 04PA
|
- | SK Machine Co., Ltd. | Details |
|
|
C-Frame Press | Komatsu | OBS25-2 | 1987 |
25t Stroke number 75-150 Stroke length 30 Die height 200 Slide adjustment amount 50 Slide dimensions 250 x 200 Bolster dimensions 550 x 300 x 113 With light safety
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
NC Lathe | GILDEMEISTER | NEF CT 40 | 1987 |
CNC - Lathe GILDEMEISTER - NEF CT 40 | turning diameter: max. 400 mm | turning length: 1.000 mm | control: EPL 2 | greates pass round over bed: 400 mm | Swing dia. over traverse guideway: 225 mm | travel -x axis: 260 mm | travel -z axis: 1.040 mm | turning speed range - main spindle: 20 - 4.000 min/-1 | power capacity - main spindel: 11 kW | max. Torque: 75 Nm | spindle bore: 72 mm | chucking diameter: 185 mm | spindle head: 140H5 | spindle diameter in front bearing: 100 mm | number of toolpositions: 12 pos. | diameter of quill: 80 mm | quill stroke: 100 mm | taper of center: MK 4 | pressure: max. 800 daN | rapid power traverse in X-and Z direction: 10 m/min | Feed speed: z: 5 m/min. | Feed force: z: 800 daN | total power requirement: 29 kW | weight of the machine ca.: 4,0 t | dimensions of the machine ca.: 4,6 x 2,1 x 2,0 m
|
- | Machine Tools Germany | Details |