NC: Fanuc 21i-M, table size: 400x200mm★

Table: φ600mm, Hollow: φ30mm, Pitch: 13(5+8)mm, MACHNo.6016★

★

Spindle 36000rpm, 11 ATCs, 3-axis scale feedback★

80t Table length 2500 Stroke length 150 Gap depth 400 Open height 420 Machine weight 6.2t

★

Chuck size 270 x 125 with 1-axis digital scale

Model used: MT4, φ40, 2-axis

◆Control device: OSPU100L ◆Hydraulic tailstock: Dead type MT No.5 ◆Hydraulic chuck: B-212 ◆Swing above bed: Φ620 ◆Swing above carriage: Φ480 ◆Center distance: 675 ◆Maximum machining diameter: Φ420 ◆Maximum machining length: 650 ◆Travel amount XZ: 300(210+90)×1275 ◆Spindle rotation speed: 35-3500 ◆Number of spindle speed change ranges: Automatic 2-stage (VAC motor winding switching) ◆Spindle end: JIS A2-8 ◆Spindle through hole diameter: Φ80 ◆Spindle bearing inner diameter: Φ120 ◆Tool post: V12M ◆Number of tools mounted on tool post: L12 ◆Shank height of square tool: 25 ◆Diameter of shank of boring bar: Φ40 ◆Tool post indexing time: 0.2 ◆Rapid traverse speed: X20000/Z25000 ◆Cutting feed speed: X, Z 0.001 to 1000000 ◆Tailstock shaft diameter: Φ100 ◆Tailstock shaft tapered hole type: MT No.5 (rotating center) ◆Tailstock shaft travel distance: 150 ◆Spindle motor: VAC 22/15 (30 min./continuous) ◆Feed shaft motor: X: BL4/Z: BL6 ◆Cutting agent motor: Chip side discharge: 0.25, rear discharge: 0.8 ◆Power supply: 29.5 (continuous) ◆Machine height: 2110 ◆Required floor space: 3980 x 1900 ◆Machine weight: 5400 *Special specifications◆Touch setter: M ◆Easy dialogue kit◆Program store capacity Tape length 320 m → 640 m _If there are any differences between the specifications and the actual product, the actual product will take precedence.

◆Size of table working surface: D580×W200 ◆Distance from top of table to bottom of grinding wheel: 397 ◆Standard chuck dimensions: D500×W200×H70 ◆Maximum left/right movement (manual): 600 ◆T-slot: W17 ◆Left/right feed speed (standard, hydraulic): 1-25m/min ◆Left/right feed handle (1 rotation): 88 ◆Maximum front/back movement: 230 ◆Front/back intermittent feed: 0.5-20 (infinitely variable) ◆Front/back continuous feed speed: 0.1-0.6m/min ◆Front/back handle feed amount (1 rotation): 5 ◆Front/back handle feed amount (1 scale): 0.02 ◆Up/down feed speed (fast forward): approx. 400 ◆Up/down handle feed amount (1 rotation): 0.1 ◆Up/down handle feed amount magnification x 1 (1 scale): 0.001 ◆Minimum up/down setting unit: 0.001 ◆Number of spark outs: 0-9 ◆ Grinding wheel dimensions (outer diameter x width x inner diameter): 205 x 6-25 x 50.8 ◆ Grinding wheel rotation speed: 3000/(50Hz), 3600/(60Hz) ◆ For grinding wheel shaft: 2.2-2 ◆ For hydraulic pump: 0.75-4 ◆ For up and down feed: 0.1-2 ◆ For dust collection: 0.4-2 ◆ Power supply capacity: 7 ◆ Required floor space: 2515 x 2250 ◆ Total machine weight: 1750 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

MSG-501 (FANUC) Collet chuck (RIKEN/SAD-40) Sub-spindle (collet chuck) 12-sided turret Rotation speed 5000 rpm Right-hand chip conveyor With tool presetter Auto bar 3m specification (ALPS/AX-3)

Table: 1100x510mm, Stroke: X1000mmY510mmZ530mm, NT50, Rotational speed: 40-4000rpm, U-axis travel distance: 15, 30, 50mm, ATC24★

FANUC20-T φ450.4-jaw single action chuck, spindle through hole diameter 85, center distance 1000, bed swing 650

Chuck 315 x 110 (Cyber Chuck/HSG-315LC) Spindle speed: 2940/3530 rpm (50/60 Hz) with dust collector

ProfessionalA NT40 Table size 1050 x 400 Stroke X710 Y400 Z360 Spindle speed 80-4000rpm