FANUC-21TB, Swing above bed: φ810mm, Maximum machining diameter φ465, Stroke: X315*Z855mm (12-sided turret), 25-2500rpm (stepless), 15-inch chuck (6-M20 added to Kitagawa B-15A), 12-sided turret, Tool setter, No core stock, With chipcon (right side discharge)

Number of strokes: 70, Stroke length: 200, Die height: 380, Slide adjustment: 100, Slide dimensions: 620 x 530, Bolster dimensions: 1100 x 680 x 120 (square), Press main body control panel separate, Carrier bar, Die lifter, #10421 Manufactured in October 2013

Controller: OSP-P300M Table Size: 1,300×560 mm Max. loading weight: 900 kg Travel　　X: 1,050　　Y: 560　　Z: 460 mm Distance between table and spindle nose: 150～610 mm 　　　　　 Spindle taper: BT40 Spindle speed: 50～15,000 rpm ATC: 32 stations Required floor space: 2,500 × 3,123 mm　　　　　　 Machine height: 2,750 mm Machine weight: 7,500 kg Spindle center through (air and coolant 1.5Mpa) 　　　　 　 In-machine coil conveyors (two, left and right) Tool breakage detection, automatic tool length compensation 　　　　　 Helical cutting Arbitrary angle chamfering 　　　　　 Synchronized tapping 　　　　　 Unidirectional positioning 　　　　　 NURBS interpolation 　　　　　 Mist collector

The photo shows the machine in an uncleaned condition. Dimensions: Overall length 1,470 x overall width 710 x height 590 mm Weight 370 kg 3-phase 200V 50/60Hz Spindle speed 70/85-1250/1500 rpm 6-inch 3-jaw scroll chuck Bed swing 300 Center distance 660

Coil mass 50 kg, maximum coil width 100 mm, tension reel included (Model TRV20B-1H / specifications: material mass 20 kg, rotation speed 40 rpm)

CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40 | x-travel: 600 mm | y-travel: 530 mm | z-travel: 510 mm | Control: M 730 BM MAPPS IV | max. spindle speed: 10.000 min/-1 | power capacity - main spindel: 15 / 11 kW | tool taper: SK 40 | transmission ratio: 1 | spindle diameter in front bearing: 80 mm | table surface area: 900 x 600 mm | max. table load: 800 kg | T-slots: 6x 18 x 100 mm | distance spindle /table: 150 - 660 mm | number of toolpositions: 30 pos. | max. tool diameter: 80 mm | max. tool-dia with free toolbox: 150 mm | max. tool length: 300 mm | max. tool weight: 8,0 kg | change-time tool to tool: ca. 1,3 sec | change-time chip to chip: ca. 3,45 sec | rapid traverse ( X / Y / Z ): 30 m/min | feed speeds: 1 - 30.000 mm/min | Tipp feed: 0 - 5.000 : 20 mm/min | total power requirement: 30 kVA | weight of the machine ca.: 6,0 t | dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m | paper band filter: Knoll KF 110 / FKA 500

OSP-P200L 8-inch 3-jaw hollow chuck (Kitagawa/B208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor, advanced easy dialogue

Dust collection/cutting tank, replacement flange

CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM | turning diameter: max. 20 mm | turning length: max. 80 mm | control: Fanuc 310is | max. usable bar diameter: 20 (25) mm | inner draw tube diameter: 28,5 mm | Max. speed main spindle: 10.000 min/-1 | power capacity - main spindel: 3,7 kW | C-Axis: C2: 360 ° | x-axis: 1: 50 / 2: 240 mm | y-axis: 1: 350 / 2: 120 mm | z-axis: 1: 80 / 2: 300 mm | number of toolpositions: 13 pos. | inner processing: 4 | outer processing: 4 | driven statition: 5 pos | Shank diameter: 20 mm | shaft cross cut: 12 x 12 | collet diameter: ESX / ER 16 | tool spindle speed range: 3x 3.450 / 2x 6.000 min/-1 | power capacity - driven tool-stations: 5x 0,98 kW | max. Torque: 3x 4 / 2x 2,3 Nm | rapid traverse ( X / Y / Z ): max. 40 m/min | feed power: max. 2,5 kN | Accelaration: max. 5 m/s² | total power requirement: 56 kVA | weight of the machine ca.: 4,8 t | dimensions of the machine ca.: 8,0 x 2,5 x 2,0 m | Bar Loading Magazine: FMB turbo 3-36 | Coolantsystem: Deltatherm 28bar | Fire extinguish system: Kraft & Bauer