Rated output current 350A, three-phase 200V 50/60Hz, rated input current 53.7/48.8A, rated load voltage 36V, rated input 18.6kVA 17.2kW, maximum no-load voltage 80/88V, temperature rise 160°, output current range 30-350A, rated duty cycle 60%, output voltage range 12/36V

FANUC31i BT50 ATC30 Table size 1550 x 760 Spindle speed 6000 rpm Stroke: X1540 Y760 Z660

Measurement range: X500mm Y700mm Z400mm Table dimensions 638 x 1160mm Probe: PH10M win: 7 Software: MCOSMOS (V4.0.R4)

OSP-P300L 12-sided turret with center, center distance 1520, right-hand chip conveyor

OSP-P300L 8-inch 3-jaw medium chuck (Kitagawa/B-208) 12-corner turret with chip conveyor, mist collector, cutting tank, and loader

Maximum processing thickness 6mm Maximum processing dimensions 220 x 220 *No edge notch

Plate width 30-400 Plate thickness 1.3-3.2 Maximum coil mass 1200kg Maximum coil inner diameter Φ508mm Maximum coil outer diameter Φ1200mm

Single phase 200V 200A Rated input 7.2kVA 4.9kw The photo shows the unit in an uncleaned condition.

MAZATROL MATRIX2 BBT40 ATC 30 pieces Spindle speed 12000 rpm Table size 600 x 500 Stroke X450 Y850 Z550 B-120 to +90° C±360° Tool length measuring device included Touch sensor included Right-side chip capacitor included

CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers | x-travel: 560 mm | y-travel: 560 mm | z-travel: 660 mm | Control: M 730 BM MAPPS IV | distance spindle center to table: 80 - 640 mm | distance Spindlenose and center of table: 70 - 730 mm | max. spindle speed: 12.000 min/-1 | power capacity - main spindel: 15 / 11 kW | tool taper: SK 40 | spindle diameter in front bearing: 80 mm | numbers of pallets: 2 pos. | work height max.: 1.050 mm | size of pallet: 400 x 400 mm | max. workpiece weight: 400 kg | max. workpiecediameter: 630 mm | Max. workpiece - hight: 900 mm | B-Axis: 0,001 ° | Indexing-time 90°: 1,3 sec | change time of pallets: 8,0 sec | number of toolpositions: 60 pos. | max. tool diameter: 70 mm | max. tool-dia with free toolbox: 170 mm | max. tool length: 450 mm | max. tool weight: 8 kg | change-time tool to tool: 0,9 sec | change-time chip to chip: 2,8 - max. 9,9 sec | feed speeds: max. 60.000 mm/min | rapid traverse ( X / Y / Z ): 60 m/min | total power requirement: 35 kVA | weight of the machine ca.: 7,9 t | dimensions of the machine ca.: 5,5 x 3,5 x 2,6 m