71495 entries, 24193~24208 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Bite | KYOCERA | KGML1212H-3 |
Shank angle 12 Total length 100mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGML1010K-2-5-125 |
Shank angle 10mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Vertical Milling Machine | MAKINO | KGJP-55 | 1981 |
X550 Y250 Z350, T1100X250, 130~2200rpm, 2-axis digital, NT40
|
Osaka | Kei-Machine Co.,Ltd. | Details |
|
Vertical Milling Machine | MAKINO | KGJP-55 | 1998 |
○Digital XY 2-axis display device○Table Working surface 1100mm x 250mm T-slot Width 14mm x 3○Spindle Spindle taper NT40 Spindle speed 130-2200rpm Gear 8-stage Spindle motor 1.5kw Spindle head rotation Left and right ±45 degrees○Axis travel X-axis 550mm Left and right - table Y-axis 250mm Front and back - saddle Z-axis 350mm Up and down - knee Spindle quill Diameter 120mm Feed 80mm Overram front and back movement 300mm Spindle end to table top 105-555mm *High column 100mm Spindle center to column front 125-425mm○Machine size Dimensions: Width 1640 x Depth 1835 x Height 2050 mm *High column 100mm Installation width 2190mm Weight: 1550 Kg○Accessories Tsudakoma VR-200 Precision Machine Vise 1pc BIG High Power Milling Chuck Set○Features/Operation Method 100mm column up specification Quill automatic cutting feed/feed out possible Table left/right automatic feed, table up/down fast forward device
|
Ibaraki | TOSHIN MACHINE TOOL CO.,LTD． | Details |
|
Vertical Milling Machine | MAKINO | KGJP-55 | 1994 |
Digital XY 2-axis display Table Working surface 1100mm x 250mm T-slot 14mm wide x 3 Spindle Spindle taper NT40 Spindle speed 130-2200rpm Gear 8-speed Spindle motor 1.5kw Spindle head rotation Left and right ±45 degrees Amount of movement of each axis X-axis 550mm Left and right - table Y-axis 250mm Front and back - saddle Z-axis 350mm Up and down - knee Spindle quill Diameter 120mm Feed 80mm Overram front and back movement 300mm Spindle end to table top 5-455mm Spindle center to column front 125-425mm Machine size Dimensions: Width 1640 x Depth 1835 x Height 1950 mm Installation width 2190mm Weight: 1550 Kg Accessories Jaw 125mm Machine vice 1 piece Milling chuck set, operation tool set ○ Features and operation method Quill automatic cutting feed/feed-out possible Automatic feed on the left and right of the table, with table up and down fast forward device
|
Ibaraki | TOSHIN MACHINE TOOL CO.,LTD． | Details |
|
Vertical Milling Machine | MAKINO | KGJP-55 | 1984 |
NT40 Table size 1100 x 250 Spindle speed 130-2200 rpm With left and right and up and down feed XY axis digital scale
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Bite | KYOCERA | KGIAR5140B-4 | Gunma | Kobayashi Kikai Co.,Ltd. | Details | ||
|
Bite | SECO TOOL | KGIAR32H | Gunma | Kobayashi Kikai Co.,Ltd. | Details | ||
|
Bite | KYOCERA | KGHSL2525M-5 |
Shank angle 25mm Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGHSL2525M-5 |
Shank angle 25 Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
Bite | KYOCERA | KGHSL2525M-5 |
Shank angle 25 Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGHR2525M-7 |
Shank angle 25mm Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGHR2525M-4 |
Shank angle 25mm Total length 150mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
|
Bite | KYOCERA | KGHR2020K-5 |
Shank angle 20mm Total length 125mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGDR2525M-2T17 |
Shank angle 25mm, total length 150mm. The photo shows a representative item.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Bite | KYOCERA | KGDR2525-C |
Good condition Shank angle 25 x 25 mm
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |