Kobayashi Kikai Co.,Ltd.

FANUC31i-B BBT50 ATC20 Table size 1600 x 610 Spindle speed 4000 rpm Stroke X1300 Y610 Z560 Tool length measurement Touch sensor Mist

Kobayashi Kikai Co.,Ltd.

FANUC31i BT50 ATC 30-piece set, Table size 1050 x 460 mm, Spindle speed 6000 rpm, with chip controller and touch sensor.

Kobayashi Kikai Co.,Ltd.

○NC unit OSP-P300MA○Table Working surface size 1300mm x 560mm Maximum load mass 900kg○Travel amount X-axis 1050mm Y-axis 560mm Z-axis 460mm○Spindle BT40 Spindle speed 12000rpm ATC20 Motor AC11/7.5kw○Machine size Dimensions Width 2564mm x Depth 3194mm x Height 2746mm Weight 7700kg

TOSHIN MACHINE TOOL CO.,LTD．

FANUC: 31i-B Spindle speed: 12000rpm ATC: 16 BBT40★

TokyoEngineering

Control unit : OSP-P500S Swing over saddle (Upper/ Lower turret): φ650 mm/φ320 mm Max. machining dia.: Upper φ650 mm/ Lower φ320 mm Maximum machining length: 1,500 mm Maximum workpiece weight (including chuck) Cantilever support: 118–335 kg Between centers: 620 kg Travel Upper tool turret: 　　　 X : 695 Y : 300 mm (±150) Z : 1,600 mm 　　　 B‑axis: 30°–210° (indexing 0.001°) Travel Lower tool turret: 　　　 X : 235 Z : 1,524 mm 　　　 C‑axis: 360° (indexing 0.0001°) W: 1,524 mm 　　　 Spindle speed : 45～4,200 rpm Spindle tip : JIS A2-８ Main spindle through‑hole diameter: φ91 mm Opposed spindle speed: 38～3,800 rpm Opposed spindle nose: JIS A2‑8 Opposed spindle through‑hole diameter: φ80 mm 　　　 Turret type: Upper: H1 (shared for L/M)　　Lower: V12 　　　 Tool storage capacity: 40 tools Tool spindle speed (upper): 50～12,000 rpm Tooling interface: HSK‑A63 Required floor space : 5,425 × 3,082 mm Height : 3,030 mm Net weight : 18,000 kg ≪Options≫　　　　　 Main spindle: D230 2J COMP (Teikoku Chuck) 　　　 Opposed spindle: FD‑215 (Teikoku Chuck) Hydraulic cylinders: Main / Opposed – SIN‑L125 (SMW) SMW special steady rest (mounted on lower turret) Coolant circuit: Upper turret through‑spindle, low pressure 　　　 Tool turret air blow: 　　Upper: shared with HI coolant (through during L/M rotation/ outer circumference) 　　Lower: combined with coolant nozzle 　　　 In‑machine work measurement: RMP60 (Renishaw) 　　　 Tool setter Work support rest (mounted on lower turret) 　　　 Easy conversational advice function Cycle tapping DNC‑TI Helical cutting Inclined machining mode Chip conveyor (front right discharge)

AK TECHNOS CO., LTD.

BT50 Allowable speed 500 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

BT50 Allowable speed 760 rpm, If there is a difference between the content and the actual product, the actual product will take precedence., [Online tour available], *Price/inventory quantity is listed in the machine link URL below.

EndoKikaiKogyo.INC

Angle head for Okuma MCV-A?, *Cannot be installed on MCV-A, BT-50, Maximum speed 760 rpm, Manually attached to the spindle, To install the tool, remove the pull stud and tighten the included bolt with a hex wrench, Please see the video at the following link for installation instructions, Please see our page at the following link for prices.

EndoKikaiKogyo.INC

Control unit: OSP‑P200LA Swing over bed: φ450 mm Swing over cross slide: φ300 mm Max. work dia.× max. length: φ280×200 mm Stroke X: 160 mm / Z: 330 mm Max. spindle speed: 75–3,000 rpm Spindle through‑hole diameter: φ66 mm Turret type: 8‑station drum turret Required floor space: 1,625 × 1,592 mm Machine height: 1,624 mm Machine weight: 2,800 kg Collet Chuck Without tailstock Left‑discharge rear chip conveyor

AK TECHNOS CO., LTD.

With mass, new main shaft motor, various bearings and oil changed, assembly and adjustment completed

Kinoshita Machinery Co., Ltd.