477 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
NC Lathe | MORI SEIKI | NL2000MC/500 | 2005 |
Conroller: MSX-850
Swing over bed: 923 mm
Swing over cross slide: 755 mm
Max. turning diameter: 356 mm
Std. turning diameter: 275 mm
Max. turning length: 510 mm
Travel X: 260 Z: 590 mm
Spindle speed: 5,000 rpm
Min. indexing: C: 0.001°
Through-spindle hole diameter: φ73 mm
Spindle taper: JIS A2-6
Turret: 12 stations
Milling spindle speed: 6,000 rpm
Tailstock travel: 564 mm
Tailstock taper: MT4
Required floor space: 2,695 × 1,923 mm
Machine height: 2,120 mm
Machine weight: 5,500 kg
8"Hydraulic hollow 3-jaw chuck
Tool presetter
|
Nara |
AK TECHNOS CO., LTD.
|
Details |
|
Vertical Machining Center | MORI SEIKI | NV6000DCG/50 | 2008 |
Controller: MSX-701Ⅲ (FANUC-31iA）
Table size: 1,000 × 600 mm
Max. load capacity: 800 kg
Travel X: 900 Y: 600 Z: 450 mm
Distance from spindle end to nose: 400～850 mm
Spindle speed: 8,000 rpm
Tool shan : BT50 （2‑surface constraint）
ATC: 230 stations
Required floor space : 4,605×4,250 mm
Machine height : 3,169 mm
Machine weight : 11,000 kg
High column (200 mm)
Sub-table (120 mm)
Rotary table (with tailstock)
1-axis additional interface
Through-spindle coolant discharge pressure: 7.0 Mpa
|
Nara |
AK TECHNOS CO., LTD.
|
Details |
|
Vertical Machining Center | MORI SEIKI | NV6000DCG/40 | 2006 |
Controller: MSX-701Ⅲ
Table size: 1,000 × 600 mm
Max. load capacity: 800 kg
Travel X: 900 Y: 600 Z: 450 mm
Distance from spindle end to nose: 200～650 mm
Spindle speed: 12,000 rpm
Tool shan : BT40
ATC: 20 stations
Required floor space: 2,750×3,304 mm
Machine height: 3,010 mm
Machine weight: 8,500 kg
Chip conveyor
Touch sensor
|
Nara |
AK TECHNOS CO., LTD.
|
Details |
|
NC Multi-tasking Machine | MORI SEIKI | NL2500Y/700 | 2010 | Tokyo |
Intex, Inc.
|
Details | |
|
NC Lathe | MORI SEIKI | NL3000/2000 | 2011 | Gunma Prefecture |
Intex, Inc.
|
Details | |
|
Drilling Machine | MORI SEIKI | YD5-65N | Unknown | Osaka |
Kei-Machine Co.,Ltd.
|
Details | |
|
Lathe | MORI SEIKI | MS-850 | 1981 | Osaka |
Kei-Machine Co.,Ltd.
|
Details | |
|
Lathe | MORI SEIKI | MS-850G | Unknown | Osaka |
Kei-Machine Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T32033B02 WE2 |
Shank diameter Φ75 for SL-45MC with tap holder
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | VJR00033 |
Mori/NL1500Y Collet size Φ20
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T33000A01 |
For internal cutting, internal diameter Φ25 x 4 rows, overall dimensions 200 x 60 x 50 mm, in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T33000A01 |
For internal cutting, internal diameter Φ25 x 4 rows, overall dimensions 200 x 60 x 50 mm, in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T33000A01 |
For internal cutting, internal diameter Φ25 x 4 rows, overall dimensions 200 x 60 x 50 mm, in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T33000A01 |
For internal cutting, internal diameter Φ25 x 4 rows, overall dimensions 200 x 60 x 50 mm, in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T33000A01 |
For internal cutting, internal diameter Φ25 x 4 rows, overall dimensions 200 x 60 x 50 mm, in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | MORI SEIKI | T32217B02 |
X-axis direction rotary tool for NL2000 and NL2500 Face mill arbor
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |