AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

AK TECHNOS CO., LTD.

Control : MELDAS　M730BM Table size : 1,100 x 600 mm Max. load capacity : 1,000 kg Travel　　X : 800 Y : 530 Z : 510 mm Distance from spindle end to nose : 150～660 mm 　　　　 Spindle speed : 13,000 rpm Tool shank : BBT40 (BIG Plus) MAS1 ATC : 30 stations Required floor space : 3,314×3,613 mm　 Machine height : 2,597 mm Machine weight : 6,400 kg In-machine coil conveyors (two, left and right) Scraper-type chip conveyor (left rear discharge) Tool length compensation and tool breakage detection Touch sensor (Renishaw OMP60) MAPPS IV Program memory capacity: 600 m Number of registered programs: 400 Custom macro common variables: 200 Coordinate rotation Relocation detection function

AK TECHNOS CO., LTD.

Control unit: CELOS ERGOline Meldaｓ M730UM Swing over bed: 923.8 mm Swing over cross slide: 755 mm Maximum turning diameter: 366 mm Standard turning diameter: 271 mm Maximum turning length: 510 mm Travel X: 260 Y: 100 (±50) Z: 590 mm C: 0.001° Spindle speed: 5,000 rpm Through-spindle hole diameter: φ73 mm Spindle nose shape: JIS A2-6 Turret: 12 stations Turret tool speed: 10,000 rpm Tailstock travel: 564 mm Tailstock taper hole: MT4 Required floor space: 3,526 x 2,082 mm Machine height: 2,145 mm Machine weight: 5,100 kg 8-inch 3-jaw hollow chuck BB-208 (Kitagawa) Chip conveyor (front right discharge) On-board tool printer MAPPS V (interactive) Rigid tap Relocation detection function

AK TECHNOS CO., LTD.

Intex, Inc.

SIEMENS SINUMERIK BT30 10000rpm, table 840×420 ATC25, stroke 700×420×380 Transformer (400V⇔200V), accessories Transformer (400V⇔200V), instruction manual

Kawakami Kikai Co.,Ltd.

SIEMENS SINUMERIK, 10000rpm, T:840×420 , S:700×420×380, ATC-25

Kinoshita Machinery Co., Ltd.

M730UM (Meldas), T:1350*600, S:1050*530*510, 8000Rpm, ATC-30, In-machine measuring device, Through spindle coolant 1.5Mpa

Kinoshita Machinery Co., Ltd.

New Japan Leasing and Sales Co.,Ltd

◆Control device: M-730UM ◆MAPPS: MAPPSIVS ◆Operation panel type: COMPACTline (12.1) ◆Maximum swing of workpiece: 348 mm (1st, 2nd) ◆Spindle distance: 670 mm ◆Maximum machining diameter: 180 mm (1st, 2nd) ◆Standard machining diameter: 120 mm (1st, 2nd) ◆Maximum machining length: 100 mm (1st, 2nd) ◆X-axis travel: 100 mm (1st, 2nd) ◆Z-axis travel: 220 mm (1st, 2nd) ◆Number of spindles: 2 ◆Maximum spindle rotation speed: up to 6000 min-1 (1st, 2nd) ◆Number of spindle speed change ranges: 1 stage (1st, 2nd) ◆Spindle end shape: JIS A2-5 (1st, 2nd) ◆Spindle through hole diameter: 61 mm (1st, 2nd) ◆Spindle bearing inner diameter: 100 mm (1st, 2nd) ◆Number of tool rests: 2 ◆Type of tool post: 10-sided turret (1st, 2nd) ◆Number of tools that can be mounted on the tool post: 10 (1st, 2nd) ◆Height of shank part of square tool bit: 20mm (1st, 2nd) ◆Diameter of shank part of boring bar: Maximum 32mm (1st, 2nd) ◆Indexing time of 10-sided tool post (1 station): 0.31 seconds (1st, 2nd) (full tool) ◆Rotating tool spindle rotation speed: 10,000min-1 _If there are any differences between the specifications and the actual product, the actual product will take precedence.

ShinMaywa Kiko

High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg

TOSHIN MACHINE TOOL CO.,LTD．

High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg

TOSHIN MACHINE TOOL CO.,LTD．

High column 200mm ○NC unit DMG MORI SLIM LINE FANUC-0iMF ○Table size 1400 x 560mm T-slot 18mm 100mm pitch 5 slots Load capacity 1000kg ○Stroke XYZ 1100 x 560 x 510mm ○Spindle BT40 Two-face contact ATC60 12,000rpm ○Others Additional 1-axis specification →NC rotary table not included Left-hand chip conveyor Scraper + drum filter Direct scale feedback In-machine measuring device Spindle + table Renishaw Spindle through 1.5MPa ○Machine size Floor width 3850 x depth 2750mm Weight 6200kg

TOSHIN MACHINE TOOL CO.,LTD．

TOSHIN MACHINE TOOL CO.,LTD．