227 entries, 17~32 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Compressor | HITACHI | 0.75P-9.5V6 | 2002 |
Output: 0.75kw, Maximum operating pressure: 10.7kg/cm2, Tank volume: 50L
|
Kumamoto Prefecture |
TokyoEngineering
|
Details |
|
Compressor | HITACHI | 1.5P-9.5V5 | Unknown |
★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Hoist | HITACHI | 1/4 S2 | 1986 |
◆LIFT: 3m ◆CAPACITY: 250kg ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆weight: 28kg _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Hoist | HITACHI | 1/4 S2 | 1986 |
◆CAPACITY: 250kg ◆LIFT: 3m ◆RATING: 30min ◆SPEED: (50Hz) 10m/min (60Hz) 12m/min ◆WEIGHT: 28kg _In the event of any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Drill | HITACHI | 15NSB-C 2.4×100 |
Brand new. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drill | HITACHI | 15NSB-C 2.4×100 |
Brand new. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drill | HITACHI | 15NSB-C 2.4×100 |
Brand new. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drill | HITACHI | 15NSB-C 2.4×100 |
Brand new. The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Chain-Block / Lever block | HITACHI | 1SNH | Unknown | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
Compressor | HITACHI | 2.2P-9.5VA6 | 2006 |
If there is any discrepancy between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
End Mill | HITACHI | 2ESMRC 4 |
New
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | 2ESMRC 4 |
New
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | 2ESMRC 4 |
New
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
|
Vertical Milling Machine | HITACHI | 2MW-V | 1983 | Mie Prefecture |
ShinMaywa Kiko
|
Details | |
|
AirTank | HITACHI | 430L | 1996 | Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details | |
|
|
Lathe | HITACHI | 4A? | 1972 |
◆ Collet chuck (mechanical feed) round material diameter: 38mm / (manual feed) 45mm ◆ Scroll chuck: outer diameter 220mm ◆ Power chuck: outer diameter 220mm ◆ Spindle through hole diameter: 57mm ◆ 80-2000rpm ◆ Swing above the bed: 490mm ◆ Width of the top of the bed: 250mm ◆ Required floor space (main body): 3100 x 1800mm ◆ Weight: 2000kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |