231 entries, 1~16 shown
Card View
| Product Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Sub-tank | HITACHI | ST-230C |
Total volume: 230L; Maximum operating pressure: 1.02MPa; Water pressure test pressure: 1.53MPa
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Double-ended grinder | HITACHI | GR26 |
Three-phase 200V 50/60Hz, grinding wheel diameter φ255×25×19.05mm, with dust collector (50Hz)
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Sub-tank | HITACHI |
Volume: 280 L; Maximum operating pressure: 10.4 kgf/cm²; Water pressure test pressure: 15.6 kgf/cm²
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | ||
|
Reciprocating compressor | HITACHI | 7.5P-9.5VP5 |
Three-phase 200V 50Hz 10 horsepower (7.5kW) Maximum pressure 0.93MPa Air output 840L/min
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Sub-tank | HITACHI | ST-55C |
55L
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Tabletop drill press | HITACHI | B13 |
Table size 250mm, 3-phase 200V 50/60Hz 500-3000/600-3600
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Metal saw | HITACHI | CU-13 |
Automatic feed, three-phase 200V, 50/60Hz (rotation speed 29/35rpm), metal saw 315×2.5×32mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drill press | HITACHI | B13S |
13mm drill, 250x250mm square table, 100V
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Universal Drill Press | HITACHI | BU23S |
Drilling capacity: 4-25mm (maximum) Tapping capacity: M6-M22 (maximum) Swing: 430mm Spindle: Tapered MT3 Three-phase 200V 50/60Hz Motor: 0.75kw (4P) Table: ◻︎300mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Package compressor | HITACHI | PB-2.2PV5 | Unknown |
50Hz★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Metal saw | HITACHI | CU-13 |
Automatic feed function, three-phase 200V, 50/60Hz (rotation speed 29/35rpm), metal saw 315×2.5×32mm. *Lowering speed remains unchanged.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Face mill cutter | HITACHI | ASRS5063 |
Shank diameter Φ32, cutting edge diameter Φ63, number of blades 4
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Throwaway end mill | HITACHI | MX31160 |
The photo shows a representative product. Shank: 16mm, Blade diameter: 16mm, Overall length: 90mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Scroll-away end mill | HITACHI | ARL3025R |
Blade diameter φ25 Shank diameter φ25 The photo shows a representative item.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Reciprocating compressor | HITACHI | 0.75P-9.5V5 |
1 horsepower (0.75kw) Three-phase 200V Tank capacity 50 liters The photo shows the tank in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Reciprocating compressor | HITACHI | 0.4OP-7T |
0.5 horsepower (0.4kw) Three-phase 200V 50Hz Oil-free Tank capacity 30L Air discharge rate 45L/min The photo shows the unit in an uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |