227 entries, 177~192 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
End Mill | HITACHI | BCF2523S32 |
R12.5 φ25×150×φ32 2 blades
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Drilling Machine | HITACHI | B23SB |
Three-phase 200V, Rotational speed 270/324-1600/1920 50/60Hz, Square table 300×300mm
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | ATS50×56 |
Shank diameter 42mm Number of blades 12
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | ATS25×32 |
α Toughmil φ25×135×φ32 in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | ATS25×32 |
α Toughmil φ25×135×φ32 in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Milling Cutter | HITACHI | ASRS5063 |
Shank diameter Φ32 Blade diameter Φ63 Number of blades 4
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Bite | HITACHI | ASRL4030 |
Total length 200mm Shank diameter φ30
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Milling Cutter | HITACHI | ASRL5063 |
Shank diameter 42, blade diameter Φ63, number of blades 4
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
End Mill | HITACHI | ATS25×32 |
α Toughmil φ25×135×φ32 in good condition
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Arc | HITACHI | AT-SC | 1962 |
200V9.4KVA, Rated current: 150A, Maximum no-load voltage: 80V★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Arc | HITACHI | AT-VC | 1963 |
200V11.5KVA, Rated current: 200A, Maximum no-load voltage: 76V★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Lathe | HITACHI | 4A? | 1972 |
◆ Collet chuck (mechanical feed) round material diameter: 38mm / (manual feed) 45mm ◆ Scroll chuck: outer diameter 220mm ◆ Power chuck: outer diameter 220mm ◆ Spindle through hole diameter: 57mm ◆ 80-2000rpm ◆ Swing above the bed: 490mm ◆ Width of the top of the bed: 250mm ◆ Required floor space (main body): 3100 x 1800mm ◆ Weight: 2000kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |
|
Others | HITACHI | GBT5 | 1974 |
Rotation speed: 3000 rpm, Grindstone diameter: φ205 x 19 x φ15.88 (inner diameter) ★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
Others | HITACHI | ABT4 | 1980 |
Three-phase AC200V★
|
Ibaraki Prefecture, |
TokyoEngineering
|
Details |
|
|
Vertical Milling Machine | HITACHI | MS-V | 1982 | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Others | HITACHI | 1983 |
370mm _If there is a difference between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture |
ShinMaywa Kiko
|
Details |