37 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Hydraulic Press | マサダ製作所 | MHP-15 | Unknown | - |
Kei-Machine Co.,Ltd.
|
Details | |
|
Hydraulic Press | JAM | HYP1000 | 1996 |
Capacity 10t Stroke length 200mm Open height 395mm Shank hole Φ32 x 60Lmm Bolster dimensions 440 x 430mm Three-phase 200V Motor 1.5kW
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Hydraulic Press | 塩出 | S4P-30-100 | 1986 |
30t stroke length 100
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
|
Hydraulic Press | 東和精機 | PHK10S | Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details | ||
|
Hydraulic Press | MORI IRON WORKS | HP-600 | 1995 |
S:310, open height 750, maximum descent speed 200 m/s, S1400*900, B1400*900
|
Osaka Prefecture |
SK Machine Co., Ltd.
|
Details |
|
Hydraulic Press | 三恵機械 | MPRK.15 | 1972 |
Ability: 15t
|
Ibaraki Prefecture |
TokyoEngineering
|
Details |
|
Hydraulic Press | RIKEN SEIKI | 油圧プレス | Unknown | Ibaraki Prefecture |
TokyoEngineering
|
Details | |
|
Hydraulic Press | KSK | HDP-60 |
Capacity: 6t Maximum operating pressure: 140kg/cm2 Stroke: 250mm Table: 430 x 350mm The photo shows the uncleaned condition.
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
|
Hydraulic Press | FUJIKIKO | RSP-3030P | 2002 |
30t Stroke 75 Gap 300 *Desk rotary specification
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Hydraulic Press | JAM | HYP-305S | 1991 |
3t Stroke 150mm Open height 280mm Shank hole φ20 x 40 Bolster dimensions 350 x 240mm Maximum lowering speed 100mm/sec Maximum stopping time 180ms Three-phase 200V 0.75kw
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
|
Hydraulic Press | 東和精機 | PHKS10-300 | 1981 |
10t Stroke 300 Table size 600 x 400
|
Saitama |
Kobayashi Kikai Co.,Ltd.
|
Details |
|
Hydraulic Press | Kawasaki | DP5-1500 | 2021 | - |
MAXET co.,Ltd
|
Details | |
|
Hydraulic Press | ASADA | MHP-5 |
CAPACITY 5ton(50KN)
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details | |
|
Hydraulic Press | OSAKA JACK | KP30 | Unknown |
Capacity 30T, Stroke length 50mm, Polster dimensions front to back x left to right 200 x 300mm, Open height 180mm, Instruction manual included, Hydraulic unit made by Osaka Jack, High pressure pump AH-2, With foot switch, , ,
|
Osaka Prefecture |
OTOMO Machine Co. Ltd.
|
Details |
|
Hydraulic Press | マサダ製作所 | MTP-10HP | Unknown |
Capacity 10t, stroke 150mm
|
Osaka Prefecture |
Kei-Machine Co.,Ltd.
|
Details |
|
Hydraulic Press | 厚木 | AP-1L-U | 2011 |
Capacity 1t Stroke length 150
|
Gunma |
Kobayashi Kikai Co.,Ltd.
|
Details |