34 entries, 1~16 shown
Card View
| Category Name | Manufacturer Name | Model Type | Year | Main Specifications | Location | Owner | ||
|---|---|---|---|---|---|---|---|---|
|
Hydraulic Press | 塩出 | S4P-30-100 | 1986 |
30t stroke length 100
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
|
Hydraulic Press | 東和精機 | PHK10S | Saitama | Kobayashi Kikai Co.,Ltd. | Details | ||
|
Hydraulic Press | MORI IRON WORKS | HP-600 | 1995 |
S:310, open height 750, maximum descent speed 200 m/s, S1400*900, B1400*900
|
Osaka Prefecture | SK Machine Co., Ltd. | Details |
|
Hydraulic Press | 三恵機械 | MPRK.15 | 1972 |
Ability: 15t
|
Ibaraki Prefecture | TokyoEngineering | Details |
|
Hydraulic Press | RIKEN SEIKI | 油圧プレス | Unknown | Ibaraki Prefecture | TokyoEngineering | Details | |
|
|
Hydraulic Press | FUJIKIKO | RSP-3030P | 2002 |
30t Stroke 75 Gap 300 *Desk rotary specification
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Hydraulic Press | JAM | HYP-305S | 1991 |
3t Stroke 150mm Open height 280mm Shank hole φ20 x 40 Bolster dimensions 350 x 240mm Maximum lowering speed 100mm/sec Maximum stop time 180ms Three-phase 200V 0.75kw The photo shows the machine in an uncleaned condition.
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
|
Hydraulic Press | 東和精機 | PHKS10-300 | 1981 |
10t Stroke 300 Table size 600 x 400
|
Saitama | Kobayashi Kikai Co.,Ltd. | Details |
|
Hydraulic Press | Kawasaki | DP5-1500 | 2021 | - | MAXET co.,Ltd | Details | |
|
Hydraulic Press | ASADA | MHP-5 |
CAPACITY 5ton(50KN)
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details | |
|
Hydraulic Press | OSAKA JACK | KP30 | Unknown |
Capacity 30T, Stroke length 50mm, Polster dimensions front to back x left to right 200 x 300mm, Open height 180mm, Instruction manual included, Hydraulic unit made by Osaka Jack, High pressure pump AH-2, With foot switch, , ,
|
Osaka Prefecture | OTOMO Machine Co. Ltd. | Details |
|
Hydraulic Press | マサダ製作所 | MTP-10HP | Unknown |
Capacity 10t, stroke 150mm
|
Osaka Prefecture | Kei-Machine Co.,Ltd. | Details |
|
Hydraulic Press | 厚木 | AP-1L-U | 2011 |
Capacity 1t Stroke length 150
|
Gunma | Kobayashi Kikai Co.,Ltd. | Details |
|
Hydraulic Press | JAM | HYP305H | 2008 |
[High speed type] ◆ Pressure capacity: 29.4kN ◆ Stroke length: 30 to 150mm ◆ Ram descent speed: 318mm/sec ◆ Ram ascent speed: 274.0mm/sec ◆ Operating pressure range: 35.4 to 106 ◆ Open height: 280mm ◆ Bolster: 350×240×30mm ◆ Shank hole: φ20×40 ◆ Motor output: 0.75kw ◆ Weight: 350kg _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Hydraulic Press | 連傑油圧工業股_有限公司 | LDO-150-20-1200×1000 | 2025 |
[Eco servo specifications] ◆ Capacity: 25-150t ◆ Lifting capacity: 11t ◆ Table: 1200 x 1000 ◆ Stroke: 800cc ◆ Daylight: 1000cc ◆ Maximum mold weight: 2t ◆ Die cushion capacity: 8-20t ◆ Die cushion stroke: 150cc ◆ Cushion pin diameter: φ34.5cc ◆ Cushion pins: 4 ◆ Table height (from FL): 1100cc ◆ Voltage: 200V ◆ Tank capacity: 800L _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |
|
Hydraulic Press | JAM | HYP1000 | 2007 |
◆High speed type◆Pressure capacity: 4-10 ◆Stroke length: 30-200 ◆Ram descent speed: 260 ◆Ram pressurization speed: 19.3 ◆Ram ascent speed: 219.0 ◆Operating pressure range: 42.4-106 ◆Open height: 359 ◆Shank hole: Φ32×60 ◆Power supply: 3Φ, AC200V, 10A ◆Motor output: 1.5 ◆Stroke type: Cut, inching, one safety stroke ◆Operation method: Two-handed operation ◆Working oil capacity: 35 ◆Body weight: 800 _If there are any differences between the specifications and the actual product, the actual product will take precedence.
|
Mie Prefecture | ShinMaywa Kiko | Details |